United Kingdom
Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Water Heaters

Comparison Gorenje GBF100T/V9 vs Gorenje GBF 100 UA

Add to comparison
Gorenje GBF100T/V9
Gorenje GBF 100 UA
Gorenje GBF100T/V9Gorenje GBF 100 UA
from $136.30 up to $173.70
Outdated Product
from $141.68 up to $180.40
Outdated Product
TOP sellers
Main
2 heaters. Anti-corrosion enamel. Frost protection. Maximum heating temperature 75 °C. Eco mode.
Typestoragestorage
Energy sourcemainsmains
Installationverticalvertical
Tank volume100 L100 L
Tank shapecylindricalcylindrical
Technical specs
Power source230 V230 V
Power consumption
1400 W /2x700W/
2000 W
Max. water temperature75 °C75 °C
Tank liningenamelenamel
Water supplywith pressurewith pressure
Heating time
325 min /up to 75°C/
235 min
Magnesium anode
Heating elements22
Heating element type
dry heater
dry heater
Features
Functions
thermostat
thermostat
Safety systems
overheat protection
safety valve
overheat protection
safety valve
General specs
Controlsmechanicalmechanical
Controls layoutfrontfront
Pipe connectionbottombottom
Tank manufacturer's warranty10 years10 years
Dimensions (HxWxD)
94х45х46 cm /weight — 27.4 kg/
97х45х46 cm
Weight34 kg
Added to E-Catalogdecember 2014june 2010

Power consumption

Electrical power consumed by the heater during operation.

This parameter is of key importance for electric models (see "Energy source"). In them, the power consumption corresponds to the power of the heating element and, accordingly, the heat output of the entire device. The overall efficiency and flow rate of the water heater directly depend on the useful power. Accordingly, high-flow rate models inevitably have high consumption. At the same time, we note that the heating power is selected by the designers in such a way as to guarantee the necessary flow rate and water temperature. So when choosing a device according to flow rate, you need to look primarily at flow rate and temperature. Power must be taken into account when connecting: for example, if a 220 V model (see "Power source") consumes more than 3.5 kW, it, as a rule, cannot be plugged into a regular outlet — connection is required according to special rules. And the most productive and high-powered models — 10 kW or more — are connected only to three-phase mains.

The power consumption has a similar value for combined boilers — adjusted for the fact that in them the electric heater is an additional source of heat. For gas and indirect models, this parameter describes the power consumption of control circuits and other auxiliary structural elements; this power consumption is usually very small — on the order of several tens of watts, less often up to 1.5 kW.

Heating time

Time to heat the storage tank (see "Type"), filled with cold water, to operating temperature.

It is worth remembering that this characteristic is not 100% accurate. Manufacturers usually indicate the heating time for certain conditions: a filled tank, maximum heating intensity, and temperature rise (∆T) by a certain number of degrees. In practice, the heating time may differ, both one way and the other. For example, if the heating time for the device is 20 minutes at ∆T = 50 °C, then when the water is heated from 15 °C to 60 °C, the time will be shorter (∆T = 45 °C). Nevertheless, this indicator allows us to evaluate the overall flow rate of the boiler, and with equal ∆T and volumes, different models can be compared in terms of heating time.

Weight

The weight of the device, excluding the water collected (passing) into it.
Gorenje GBF T/V9 often compared
Gorenje GBF UA often compared