United Kingdom
Catalog   /   Small Appliances   /   Home Appliances   /   Water Filters

Comparison Atoll A-550m STD vs Atoll A-550 STD

Add to comparison
Atoll A-550m STD
Atoll A-550 STD
Atoll A-550m STDAtoll A-550 STD
from $260.00 up to $360.64
Outdated Product
from $275.16 up to $275.20
Outdated Product
TOP sellers
Typekitchen sinkkitchen sink
Reverse osmosis
Connectionto the water supplyto the water supply
Purpose
for cold water
for cold water
Specs
Number of flasks33
Stages of purification55
Pollution clipping0.01 µm0.01 µm
Filtration speed0.6 L/min0.6 L/min
Tank volume12 L12 L
Resource10 ths of L10 ths of L
Max. operating pressure6 atm6 atm
Max operating temperature40 °C40 °C
Water mineralization
Filtration
Types of filtration
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
mechanical impurities
organic impurities
active chlorine
ferrous
heavy metal ions
pesticides
nitrates
cadmium
petroleum products
hardness salts
More features
Replacement cartridges
Pentek P-5, Pentek GAC-10, Pentek P-1, Filmtec TW30-1812-50, /Pentek GS-10 CAL/RO/
P-5, GAC-10, P-1, TW-1812-50, CK-2586C
Fitting size½"
Tap
Dimensions42x15x43 cm42x15x43 cm
Added to E-Catalogoctober 2014june 2013

Water mineralization

The presence of a water mineralizer in the filter design. The mineralizer is usually a container filled with a special slowly dissolving mixture. Thanks to it, filtered water is saturated with various micronutrients: calcium, potassium, fluorine, ferrous (of course, not harmful colloidal ferrous, but another easily digestible form) and others. They have a positive effect on the human body and improve the taste of the water itself compared to completely purified water.

Mineralizers are found mainly in filters equipped with reverse osmosis systems (see above): the fact is that during the operation of such systems, not only harmful impurities are removed from the water, but also the mentioned micronutrients that got there naturally.

Replacement cartridges

Models of replaceable cartridges for which the filter is designed. Knowing the names of models, it will be much easier for you to find a replacement for an exhausted cartridge. In addition, the options directly named by the manufacturer are fully compatible with the filter and correspond to official specifications, while there is no such guarantee for "non-native" cartridges.

Several names in this paragraph are usually indicated for filters with multi-stage filtration (see "Stages of purification") — a cartridge for each stage.

Fitting size

The diameter of the pipes to which the filter is designed to be connected; indicated only for models with water connection, see "Connection". In plumbing, pipes of standard diameters are usually used, and inches are used for measurement — for example, 0.75", 1", etc. Most filters are equipped with a set of adapters for different pipe diameters, therefore, most likely there will be no connection problems, even if the initial diameters do not match. Nevertheless, it is best to choose a filter that matches your water supply in terms of fitting size — in this case, the connection is more reliable, and compliance with the claimed characteristics will be complete.
Atoll A-550m STD often compared
Atoll A-550 STD often compared