Dark mode
United Kingdom
Catalog   /   Automotive   /   Car Audio   /   Car Subwoofers

Comparison Kicx ZM-12 vs Alphard Machete M10D2

Add to comparison
Kicx ZM-12
Alphard Machete M10D2
Kicx ZM-12Alphard Machete M10D2
from $79.64 up to $98.28
Outdated Product
Outdated Product
TOP sellers
Application areacarcar
Designwithout bodywithout body
Typepassivepassive
Size12" (30 cm)10" (25 cm)
Tech specs
Rated power350 W350 W
Max. power1000 W1000 W
Sensitivity88 dB85 dB
Dual voice coil
Impedance2 ohm2 ohm
Resonant frequency35.7 Hz29,87 Hz
General
Diffuser materialpulp / paperpulp / paper
Woofer Diameter300 mm250 mm
Woofer depth160 mm
Weight6.2 kg
Added to E-Catalogdecember 2016march 2016

Size

The size (diameter) of the main subwoofer speaker. In all types of subwoofers, this parameter primarily affects the power and depth of sound: the larger the speaker, the louder it is and the deeper the bass it can provide (ceteris paribus). However with an increase in the size and dimensions, they increase accordingly, which determines the installation possibilities. The latter is especially true in Free Air subwoofers (see "Execution"): some cars are initially equipped with "seats" for a certain size, and it is difficult to install models with other dimensions there.

Now on the market there are subwoofers with such popular sizes: 5" (13 cm), 6" (15.25 cm), 6.3" (16 cm), 6.5" (16.5 cm), 6.75" (17 cm), 8" (20 cm ), 8.25"(21cm) , 9" (23cm ), 10" (25cm ), 11" (27cm), 12"(30cm) , 13" (33cm), 15"(38cm) , 16 " (40 cm), 18" (46 cm).

Sensitivity

Sensitivity determines the loudness of the subwoofer when a signal of a certain power is connected to it: with equal signal power and impedance (see below), the subwoofer with the higher sensitivity will sound louder.

Resonant frequency

The natural frequency of the cone in the subwoofer speaker, namely the frequency with which the cone will oscillate if the speaker is suspended freely in the air and a single impulse is transmitted to the cone (for example, by clicking on it with your finger). In subwoofers, this parameter determines, in particular, the lower limit of the frequency range (see above): at frequencies below the resonant sound power drops sharply. Accordingly, for deep rich bass, the resonant frequency should be as low as possible. This parameter is also used to calculate the size of the enclosure for the subwoofer.

Woofer Diameter

Subwoofer main speaker size. The diameter of the woofer determines the size of the device (see above).

Woofer depth

The size of the main subwoofer speaker from the front (usually the frame protruding beyond the diffuser) to the rear edge (where the magnet is usually located). In practice, it matters when selecting enclosures for frameless models, as well as when installing Free Air (see "Design"): this is the depth to which the speaker will be "recessed" into the enclosure or trunk. And a flat subwoofer will not always produce less bass than its more voluminous counterpart.
Kicx ZM-12 often compared
Alphard Machete M10D2 often compared