Comparison Kentavr MB-2060D-4 vs Kentavr MB-2060D-3

— Petrol. Gasoline internal combustion engine. Such engines have good power, are easy to operate and are not limited by the length of the power cord (like electric ones). Their disadvantages are a significant level of noise, exhaust emissions and the need to purchase fuels and lubricants, as a result, a rather high cost of operation. However, most two-wheel tractors and cultivators have gasoline engines.

— Diesel. An internal combustion engine, which is similar in design to a petrol engine, but has a number of differences in the principle of operation and, as a result, in operation. So, it refuels with diesel fuel, which is somewhat cheaper than gasoline. Diesel engines have good torque at low revs, making them well suited for heavy work (ploughing, hauling). On the other hand, they are not without drawbacks — the high cost of repairs and high requirements for fuel purity. As a result, diesel two-wheel tractors and cultivators are less common.

— Electric (mains). Electric motors powered by an electrical network, most often — ordinary household 230 V. The advantages of all electric motors over gasoline / diesel ones are, in particular, low cost (including in operation), smaller dimensions and weight, ease of maintenance ( it is practically not required), low noise level and absence of exhaust gases. On the other hand, their power is relatively low — even for...mains-powered models, it does not exceed 3 kW. Therefore, mainly units for small volumes of work are made electric, which are more like cultivators than full-fledged two-wheel tractors. It is also worth noting here that when powered from the mains, the mobility of the unit is limited by the length of the power cord. On the other hand, models with such a power supply are generally more powerful than rechargeable ones, with the same power they are lighter and cheaper, and the operating time is almost unlimited.

— Electric (battery). Electric motors powered by batteries. The main features of electric motors as a whole are described above, and battery power makes the unit as autonomous as possible, independent of sockets and the length of the power cord. At the same time, models with this power supply are even less powerful than devices connected to the network — most of them do not even reach 1.5 kW. In addition, the battery affects the weight and cost of the unit, and the operating time is limited; charging the battery takes a lot of time and still requires a power source. So it makes sense to use cultivators of this type only when the volume of work is small and there are no outlets nearby; such situations are extremely rare, so this option has not gained distribution.

The number of cutters that the two-wheel tractor is equipped with. Note that for models with active rototillers (see below), this parameter is not indicated: such attachments are removable, and active rototillers with different performance characteristics can be installed on one unit.

Speaking of quantity, a cutter means a separate "asterisk" of several curved knives installed on the working axis of the unit. The number of such “stars” is selected depending on the processing width that the manufacturer wants to provide: one cutter captures a strip on average from 12 to 18 cm, and several of them are needed for a more or less decent working width.

Engine power of the cultivator / walk-behind tractor in horsepower. The basic unit of power these days is the watt, but gasoline and diesel engines (see "Engine type") often use the more traditional horsepower designation. 1 hp is approximately equal to 735 watts.

A more powerful engine allows you to achieve higher productivity, width and depth of processing. On the other hand, high power significantly affects the price, weight and dimensions of the unit, as well as electricity / fuel consumption. In light of this, the characteristics of the engine are selected by the manufacturer, taking into account which “weight category” the walk-behind tractor belongs to. The most limited modern units have a power of up to 2 hp., in the most severe and advanced, this figure can exceed 13 hp. ; 4 - 7 HP can be called an average, and 2 - 4 hp. and 7 - 13 hp respectively below and above average.

Detailed recommendations on the optimal power for a particular situation can be found in special sources.

Motor block / cultivator engine power in watts. This designation is normally used for electric engines, but can also be used for gasoline/diesel engines, along with horsepower (for these, see Engine Power above).

A more powerful engine allows you to achieve higher productivity, width and depth of processing. On the other hand, high power significantly affects the price, weight and dimensions of the unit, as well as electricity / fuel consumption. In light of this, the engine power is selected by the manufacturer, taking into account which “weight category” the walk-behind tractor belongs to, what characteristics it should show. So, the lightest models have a power of up to 1.5 kW, just such a device is best suited for a small area of 6 - 8 acres. Motoblocks up to 3 kW are already able to cope with 10 - 15 acres, a power of 3.5 - 5 kW is suitable for a plot from 50 acres to a couple of hectares. Units for 5 - 10 kW already belong to the professional level, they are "too tough" open spaces of 7 - 10 hectares; and the heaviest and most powerful modern walk-behind tractors have a power of more than 10 kW.

The average amount of fuel consumed by the gasoline or diesel engine (see "Engine type") of the cultivator/two-wheel tractor per hour of operation. This value is rather conditional, because depending on the mode of operation, fuel consumption may vary in one direction or another; however, in general, it provides an estimate of the approximate amount of fuel required for a given operating time.