Communication type
According to the type of communication, all modern walkie-talkies are divided into
analogue and
digital. Here is a detailed description of each option:
— Analogue communication. The simplest, from a technical point of view, way of working: the sound received by the walkie-talkie microphone is "embedded" into the radio signal directly, without converting to digital format. Accordingly, the main advantages of analogue radios are the simplicity of design and low cost. The key disadvantages of this option are the relatively low sound quality, which, moreover, strongly depends on the actual signal power: the weaker the signal, the worse the audibility and the higher the level of interference. In addition, the connection itself is not protected from eavesdropping: any user in the range of the walkie-talkie, having tuned in to your range and channel, will be able to hear your conversations. On the other hand, this can be both a disadvantage and an advantage — for example, if we are talking about a CB range car radio, often used to communicate with unfamiliar people. And you can protect the channel from listening, for example, using a scrambler.
— Digital communication. With this communication format, the analogue audio signal (electrical oscillations) is first converted to digital (a sequence of zeros and ones), and only then is sent to the transmitter. In the receiver, accordingly, everythin
...g happens the other way around: the digital-to-analogue converter restores the original sound from the stream of numbers. Digital walkie-talkies are noticeably more complicated and more expensive than analogue ones, but they have a number of advantages over them. First, the signal is much better protected from interference. Secondly, its quality does not change when the power changes: the receiving party either hears the sound in its original quality (even at the minimum signal level), or hears nothing at all. Thirdly, the digital format allows the use of various additional features, such as text messages. And fourthly, in such walkie-talkies it is much easier to implement eavesdropping protection. So, within the same range, hundreds or even thousands of channels can be provided, with random selection and periodic switching between them (a similar technology is used in mobile networks and Wi-Fi equipment). And interconnected devices can "agree" on a common unique encryption key — as a result, an outsider will not be able to decrypt digital data, even if he finds a communication channel.Subtones
Subsonic signals to reduce short-term interference on the air or to ignore radios broadcasting in the same frequency channel without a subtone included. The parameter is set by a special code, which indicates the frequency of the tone mixed with the useful signal. A similar subtone must be set on the receiving device. The sounds of subtones are removed from the signal before being fed into the amplifier and further into the sound system of the walkie-talkie.
— CTCSS. An analogue tone transmitted with a call to separate walkie-talkie users on the same channel and to filter out interference. Various radios may use 38, 39, or 64 CTCSS tones at frequencies from 33 to 254.1 Hz. The serial numbers of specific tones are determined by special charts.
— DCS. Radios with the DCS digital subtone system "hear" each other when set on the transmitting and receiving side of the same code. The DCS system offers over a hundred standardized digital codes, which are a three-digit number of zeros and ones at a carrier frequency of 133 Hz. DCS subtones effectively divide the communication frequency according to the "friend or foe" principle, cutting off unauthorized users, interference or noise on the air.
— CTCSS\DCS. Walkie-talkie models that combine analogue and digital formats for introducing subtones with the ability to switch between them.
Ringtones
The number of ringtones provided in the design of the radio. The more such melodies, the wider your possibilities for choosing the most pleasant call signal.
Talk Time
The maximum operating time of the radio in talk mode — i.e. with continuous radio traffic and approximately equal distribution of time between work for reception and transmission. You should pay special attention to this parameter if you plan to communicate intensively. Note that when receiving, much less energy is consumed than when transmitting. And therefore, in fact, the time in the talk mode, even with continuous radio exchange, may differ from the claimed one both downward (with large volumes of transmissions) and upward (when working mainly for reception).
Charging port
Availability of a
USB charging port for the walkie-talkie's battery. This paragraph may also specify the exact type of connector.
USB (regardless of the connector type) is a universal standard, with a wide variety of accessories made for it. A walkie-talkie with such a port can be charged from sockets, car cigarette lighters, power banks, charging stations, and more. As for the specific types of connectors, modern walkie-talkies primarily use smaller USB interfaces — microUSB and the newer USB-C. There is no fundamental difference between these options, except for USB-C's ability to deliver higher power, which positively affects charging speed.
In addition, the USB port can be used to connect the walkie-talkie to a computer, for instance, to manage settings, update firmware, etc. However, unlike charging, this function is not mandatory and is not available in all models.
Flashlight
The walkie-talkie has a built-in
flashlight — usually in the form of one or more LEDs. This feature is useful at night or when there is insufficient light, such as when you are outdoors at night.
Water protection
Walkie-talkies with this feature have a special protected housing that prevents dust and moisture from getting inside and damaging sensitive electronic components. If you often have to be in adverse conditions, you should pay attention to such walkie-talkies. At the same time, note that the specific degree of protection in different models can vary markedly, and here it is most convenient to evaluate it by IP marking. This marking consists of the letters IP and two numbers; resistance to dust — the first digit, resistance to moisture is described by the second, last digit. You can find the following options for protection against moisture:
— 4. Protection against splashes from any direction. Thus, the walkie-talkie will be fine during rain of medium intensity, regardless of the strength of the wind
— 5. Protection against water jets from any direction. Allows walkie-talkie to endure a combination of strong wind with a downpour.
— 6. Protection against strong water jets and sea waves. It is considered the minimum level of protection that allows use near water.
— 7. The possibility of short-term (less than half an hour) immersion under water to a shallow depth (less than 1 m); continuous operation in immersed mode is not expected.
— 8. The highest level of water protection. Allows long-term (more than 30 minutes) immersion under water to a depth of 1 m or more, and even permanent work in a submerged position. However, note that specific restr...ictions on the use in such walkie-talkies may be different, they must be clarified according to the manuals.
Dust protection values are presented more modestly:
5 — dust resistance without full closure (a certain amount of dust can get inside, but it is small and does not affect the operation of the device)
6 — full protection (dust is not able to penetrate inside the case).
At the same time, there are situations when the manufacturer did not test the device for dust resistance, but limited itself to water protection. In this case, instead of the dust protection number, there is an X, for example IPX7.
