Comparison Cooler Master Hyper H411R vs Cooler Master Hyper H412R

Clear Table
Add to comparison
	Cooler Master Hyper H411R	Cooler Master Hyper H412R
	from £22.99 Outdated Product	from £22.99 up to £30.87 Compare prices 3
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Amazon.co.uk £25.00 Buy in shop Quzo.net £31.00 Buy in shop Idealo.co.uk £23.00 Buy in shop
Main specs
Features	for CPU	for CPU
Product type	air cooler	air cooler
Air flow direction	sideways (dispersion)	sideways (dispersion)
Max. TDP	100 W	100 W
Fan
Number of fans	1	1
Fan size	92 mm	92 mm
Bearing	sliding	sliding
Max. RPM	2000 rpm	2000 rpm
Speed controller	auto (PWM)	auto (PWM)
Max. air flow	34.1 CFM	34.1 CFM
MTBF	40 K hours	40 K hours
replaceable
Noise level	29 dB	29 dB
Power source	4-pin	4-pin
Radiator
Heat pipes	4	4
Heatpipe contact	straight	straight
Heatsink material	aluminium / copper	aluminium / copper
Plate material	aluminium	aluminium
Socket	AMD AM2/AM3/FM1/FM2 AMD AM4 Intel 775 Intel 1150 Intel 1155/1156 Intel 1366 Intel 2011 / 2011 v3 Intel 2066 Intel 1151 / 1151 v2 Intel 1200	AMD AM2/AM3/FM1/FM2 AMD AM4 Intel 775 Intel 1150 Intel 1155/1156 Intel 1366 Intel 2011 / 2011 v3 Intel 2066 Intel 1151 / 1151 v2 Intel 1200
General
Lighting
Lighting colour	white
Mount type	bilateral (backplate)	bilateral (backplate)
Dimensions	102x83x136 mm	102x83x136 mm
Height	136 mm	136 mm
Weight	358 g	358 g
Added to E-Catalog	february 2018	february 2018

Lighting

The presence of its own illumination in the design of the cooling system.

The backlight serves a purely aesthetic function — it gives the device a stylish appearance that blends well with other components in the original design. Thanks to this, such cooling systems are especially appreciated by gamers and fans of external PC modding — especially since the lighting can be different, and the most advanced models even provide backlight synchronization with other components (see below). On the other hand, this function does not affect the efficiency and performance, and the overall cost is inevitably affected, sometimes quite noticeably. Therefore, if the appearance does not play a fundamental role for you, the best choice, most likely, will be a cooling system without backlight.

Lighting colour

The colour of the backlight installed in the cooling system.

See above for more details on the backlight itself. Also note here that in the illumination of modern cooling systems there is both one colour (most often red or blue, less often green, yellow, white or purple), and multi-colour systems such as RGB and ARGB. The choice of a single-colour backlight depends mainly on aesthetic preferences, but the last two varieties should be touched upon separately.

The basic principle of operation of both RGB and ARGB systems is the same: the design provides for a set of LEDs of three basic colours — red (Red), green (Green) and blue (Blue), and by changing the number and brightness of the included LEDs, you can not only intensity, but and tint of light. The difference between these options differs in functionality: RGB systems support a limited set of colours (usually up to one and a half dozen, or even less), while ARGB allows you to choose almost any shade from the entire available colour range. At the same time, both of them can support backlight synchronization (see below); in general, this function is not required for RGB and ARGB systems, but it is used almost exclusively in them.