Comparison Cisco ISR4321/K9 vs Cisco ISR4451-X/K9

How the router connects to the Internet or other external network.

Almost all modern routers have ethernet network connectors for this purpose, however, in addition to them, other connection options can be provided — both wired ( ADSL, SFP / SFP + optics) and wireless (mobile access via 3G / 4G modem or SIM card). Here are the features of each option:

— Ethernet. A standard LAN network cable connector (“twisted pair”) is the most popular modern wired connection format in computer networks. Widely used both in "local" and to provide access to the Internet. This standard is somewhat inferior to SFP / SFP + (see below) in terms of speed and noise immunity, but it is much cheaper. The speed of work in modern versions of Ethernet can reach 10 Gbps (see "Connection speed of WAN ports"), theoretically, a further increase in throughput is possible.

— SFP / SFP + (optics). A connector for transmitting network traffic over a fiber optic cable. The main advantage of such a cable is complete insensitivity to electromagnetic interference. And data transfer rates can reach 2.7 Gbps in the original SFP and 16 Gbps in SFP+. At the same time, maintaining this standard is not cheap, and the benefits mentioned are not often needed in fact. Therefore, SFP / SFP + is found mainly in mid-range a...nd top-level routers.

— ADSL. Connecting to the Internet through a fixed telephone network using ADSL technology. The key advantage of this connection is the ability to use existing networks without laying additional wires; at the same time, Internet access is completely separated from telephone communication and traffic does not interfere with voice calls. On the other hand, the bandwidth of ADSL is very low by modern standards (less than 24 Mbps), moreover, the data transmission speed is noticeably lower than the reception speed. This can create problems for video communication and some other specific tasks. So nowadays ADSL is used less and less.

— 3G/4G modem (USB). Internet connection via mobile network using a separate 3G or 4G modem connected to the USB port. This feature can be useful where there is no full-fledged wired connection (for example, in rural areas), and also as a fallback option in case the main communication channel fails. And the type of network supported depends mainly on the modem used (the compatibility of the router with different models needs to be specified separately, but most often there are no problems with this). As for specific types of networks, most 3G modems work in UMTS networks (the same ones that are massively used by mobile phones); the data transfer rate in such networks can reach 75 Mbit / s (however, usually it is much lower). Less common are 3G modems for EV-DO networks based on CDMA — this standard has lower speeds (up to 14.7 Mbps) and not as extensive coverage as UMTS, however, both the equipment and the connection itself can be cheaper. And the designation "4G" means only one type of networks — LTE; it provides speeds up to 173 Mbps, but is not as widespread as 3G.

— SIM card. Another option for connecting to the Internet via mobile networks is its own SIM card slot provided in the design of the router. This option is convenient because you do not need to buy an additional device (modem) for mobile Internet — you just need to purchase an operator's SIM card. On the other hand, due to the built-in mobile communication modules, such routers themselves are more expensive than analogues for USB modems. In addition, the connectivity options in them are limited by the characteristics of the module: for example, a router for 3G networks will not be able to fully use 4G networks (whereas a USB modem can usually be changed to a more advanced one). As a result, this option is relatively rare in modern equipment.

The number of standard Gigabit Ethernet RJ-45 network connectors provided in the device design.

As the name suggests, these connectors provide data transfer rates up to 1 Gbps. Initially, Gigabit Ethernet was considered a professional standard, and even now the real needs for such speeds arise mainly when performing special tasks. Nevertheless, even relatively inexpensive computers are now equipped with gigabit network adapters, not to mention more advanced technology.

As for the number of connectors, it corresponds to the number of network devices that can be connected to the "switch" directly, without the use of additional equipment. At the same time, it is worth noting that in some "switches" individual connectors of this type are combined with optical SFP or SFP +. Such connectors are marked "combo" and are taken into account both when counting RJ-45 and when counting SFP / SFP +.

The number of optical network ports of the SFP standard provided in the design of the device. We emphasize that we are talking about "ordinary" SFPs; SFP+ data is usually listed separately.

Specifically, in switches, the marking “SFP” usually means a connector for fiber with a connection speed of 1 Gbps. Technically, this is not much compared to RJ-45 speeds; however, this connection format has a number of advantages. One of the main ones is a greater effective range: the mentioned gigabit standard works with a cable length of up to 550 m, and by the standards of optical fiber, this is still very little. True, the cable itself is sensitive to kinks and requires quite delicate handling; on the other hand, it is completely immune to electromagnetic interference. On the other hand, in general, the SFP format is noticeably less popular in network equipment than RJ-45; therefore, there are few ports of this type even in advanced devices ( 1 port or 2 ports, less often more). It is also worth considering that there may be so-called combo connectors that combine SFP and RJ-45; the presence of such ports is specified in the notes, they are taken into account both in the calculation of RJ-45 and in the calculation of SFP.

The number of USB ports provided in the design of the router. USB is a universal interface used in computer technology to connect peripheral devices for various purposes. One of its uses is to connect a 3G modem (if provided, see “Data entry (WAN-port)”), but this is not limited to this: in fact, the options for using USB ports directly depend only on the capabilities specified in the router firmware. So, in some models, you can connect a flash drive or an external hard drive to this connector — to update the firmware or even organize an FTP server directly on the router. And for other peripherals — printers, cameras, etc. — USB connection can be used to work as network devices (however, such functions are rare in standard firmware).

The PoE output(s) standard used by the router.

By itself, PoE (Power over Ethernet) technology allows you to transfer not only data over an Ethernet network cable, but also energy to power network devices. And the presence of a PoE output (outputs) makes it possible to power such devices from the network connectors of the device. This eliminates the need to lay additional wires or use independent power sources, which is especially important for some equipment, such as external IP surveillance cameras. And when using the so-called splitters - devices that divide the PoE cable signal into purely network data and power power - using such outputs, you can also power equipment that does not initially support PoE (the main thing is that their power characteristics correspond to the capabilities of the switch).

As for PoE standards, they determine not just the overall power supply, but also compatibility with specific devices: the consumer must support the same standard as the router, otherwise normal operation will be impossible. Nowadays, including in the connectors of "switches", you can find two types of such standards - active (802.3af, 802.3at, 802.3bt) and passive (one, that's what it's called). The main difference between these varieties is that active PoE provides for matching the power source and load in terms of voltage and power, while passive PoE does not have such functions, and energy is supplied “as is”, witho...ut adjustments. And here is a more detailed description of specific standards:

— 802.3af. The oldest active PoE power format in use today. It provides power at the power output up to 15 W (at the input of the consumer - up to 13 W), output voltage 44 - 57 V (at the input - 37 - 57 V) and power in a pair of supply wires up to 350 mA. Despite the "venerable age", it still continues to be widely used; so there are still quite a lot of routers that work only with 802.3af on sale (as of the end of 2021). However, it is worth considering that this standard immediately covers 4 so-called power classes (from 0 to 3), which differ in the maximum number of watts at the output and input. So when using 802.3af, it doesn't hurt to make sure that the output power will be sufficient for the selected load.

— 802.3af/at. A combination of two standards at once - the 802.3af described above and the newer 802.3at. The latter allows you to supply power up to 30 W (up to 25.5 W at the input of the powered device), uses a voltage of 50 - 57 V (42.5 - 57 V at the input), while the power in a pair of wires does not exceed 600 mA. Such a combination is relatively inexpensive, while it makes it possible to power a wide variety of external devices; so at the end of 2021, it is this type of PoE outputs that is most popular in routers.

— 802.3af/at, bt. Combination of 802.3af/at above with 802.3bt (PoE++, PoE type 3 or type 4). 802.3bt is the newest PoE power format; unlike earlier ones, it uses not 2, but 4 power wires, which allows you to supply very solid power to external devices - up to 71 V (at 90 W at the power output). Such capabilities are indispensable when supplying power to equipment with increased consumption - for example, external surveillance cameras, supplemented by heating systems. On the other hand, support for the 802.3bt standard significantly affects the cost of the device, and such a connection puts forward special requirements for the quality of cables. In addition, you need to keep in mind that this standard also includes the UPoE format created by Cisco and used in its equipment; and this standard (it is known as PoE type 3) has a more modest power - up to 60 W at the output (up to 51 W at the consumer's input). Yes, and the general standard 802.3bt includes two power classes - class 8, at which maximum performance is achieved, and class 7, where 75 watts are supplied to the output, and about 62 watts reach the consumer. So if you plan to use 802.3bt equipment, when choosing a router from this category, you must make sure that the power supply is enough for the connected devices to work properly.

— Passive. As already mentioned, the key difference between passive PoE and the active standards described above is that in this case the power output produces a strictly fixed power, without any automatic adjustments and adjustments for a specific device. The main advantage of this standard is its low cost: its implementation is much cheaper than active PoE, so such ports can be found even in entry-level routers. On the other hand, the aforementioned lack of auto-tuning makes it much more difficult to coordinate the equipment with each other - especially in light of the fact that different devices can differ markedly in the output / consumption of voltage and power (power). Because of this, when using passive PoE, you need to pay special attention to the compatibility of the source and load in these parameters. If there is no match, then in the best case (if the output voltage / power is lower than required), the power simply will not work, and in the worst case (with excess voltage / power), there is a high probability of overloads, overheating, and even breakdowns with fires - and such troubles may not occur immediately, but after a fairly long time. And it is definitely impossible to connect devices with active inputs to passive PoE outputs - for the same reasons.

In conclusion, it should be said that if the router has both an input with PoE support and several outputs with this function, then all the possibilities of such outputs, as a rule, can only be realized when the switch itself is powered from the outlet, and not from the PoE input. See "PoE Outputs" for details.

The number of PoE-enabled outputs (see above) provided in the design of the router.

In theory, this number corresponds to the maximum number of network devices that can be powered via PoE. However, in practice, two more points should be taken into account. The first and foremost is the total power delivered by such ports; most often it is indicated in the item "Total PoE power", and for models with one output - in the item "Power per PoE output". In any case, if the power consumption of the connected equipment is higher than this value, at best, the power from the switch simply “does not start”, and at worst, overloads and equipment breakdowns are possible.

The second nuance concerns routers, which themselves can be powered using Power over Ethernet. Recall that the power of such a power supply is very limited, so when it is used, most of the power usually goes to the operation of the switch itself, and there is little (if any) left to supply the PoE outputs. So when a device is powered via PoE, its own PoE outputs, at best, greatly “sag” in terms of capabilities (maximum power decreases, the number of simultaneously powered devices decreases), and at worst, they completely turn into ordinary network ports, without additional power. So if you plan to fully use the PoE outputs, you should take care to connect the switch itself to the network; this is especially true for models where there is more than one such output.

— Built -in. The built-in power supply does not take up space on the outside, but can significantly increase the size and weight of the entire router. Because of this, this option is quite rare — mainly among rack-mount models (see "Form factor"), where an external unit can create significant inconvenience, as well as among the most powerful desktop routers, for which dimensions and weight is not critical.

— External. Theoretically, the external placement of the power supply requires additional space, and therefore is not as convenient as the internal one. In fact, most blocks of this type are quite compact in size and are equipped with “plugs” for sockets right on the case — in other words, the block is installed on a socket, and from there the wire stretches to the router. And the absence of power circuits and transformers inside the routers has a positive effect on their compactness. Thanks to all this, this option is very popular among desktop models (see "Form factor"), primarily entry-level and mid-level.