Comparison TP-LINK TL-R600VPN vs TP-LINK TL-ER6020

— Desktop. Desktop routers include routers that do not use special rack mounts and are suitable for placement on any suitable surface — a table, shelf, etc. Although there are quite advanced models among desktop devices, however, most of them have relatively simple functionality and are designed for use in small networks where an abundance of equipment is not required.

— Rack mounted. Routers that are standard installed in a telecommunications rack are usually 19 "standard (although technically many of them can also be used as desktop ones, albeit with less convenience). Racks are used in extensive networks that require a large amount of equipment; accordingly, routers of this type in general, more powerful and advanced than the desktop, and are designed primarily for professional use.

— To the mast. Installation on a mast or other vertical structure — a tower, a pole, etc. Quite a rare form factor; It is mainly used in waterproof models designed for the possibility of working outdoors. Mobile network capable devices in this category may have a directional antenna to improve connectivity.

The number of ports designated as WAN by the manufacturer. They are intended for wired connection of the device to the Internet or other external networks (to solve some specific problems).

In this case, dedicated LANs mean directly marked network connectors designed for wired connection of LAN devices - PCs, servers, additional access points, etc. The number of ports corresponds to the number of devices that can be directly connected to the equipment by wire.

The presence of a console port in the router. This connector is used to control the device settings from a separate computer, which plays the role of a control panel — a console. The advantage of this format of operation is that access to the functions of the router does not depend on the state of the network; in addition, special utilities can be used on the console that provide more extensive capabilities than a regular web interface or network protocols (see "Management"). An RS-232 connector is often used as a console port, but in modern routers this role can also be played by a separate Ethernet input (not used for any other purpose).

Management methods and protocols supported by the router.

— SSH. Abbreviation for Secure Shell, i.e. "Safe shell". The SSH protocol provides a fairly high degree of security, because. encrypts all transmitted data, including passwords. Suitable for managing almost all major network protocols, but requires a special utility on the host computer.

— Telnet. A network management protocol that provides configuration via a text-based command line. It does not use encryption and does not protect transmitted data, and is also devoid of a graphical interface, which is why in many areas it has been supplanted by more secure (SSH) or more convenient (web interface) options. However, it is still used in modern network equipment — in particular, as a means of managing FTP servers.

— Web interface. This function allows you to open the router's management interface in a regular Internet browser. Thus, to access the settings, you do not need special software — just a regular computer or even a smartphone / tablet is enough (modern mobile browsers are close to desktop ones in terms of capabilities).

— SNMP. Abbreviation for Simple Network Management Protocol, i.e. "simple network control protocol". It is a standard part of the common TCP/IP protocol on which both the Internet and many local networks are built. I...t uses two types of software — "managers" on control computers and "agents" on managed computers (in this case, on a router). The degree of security is relatively low, but SNMP can be used for simple management tasks.

Note that this list is not exhaustive — some routers have other, more specific management capabilities (such as the EEM event manager in Cisco devices).

The basic capabilities of the router — that is, the functions directly related to the work for the main purpose. The most common of these features are DHCP server, load balancing, link reservation, port forwarding, MAC address cloning, VPN and DDNS support. Here is a detailed description of each item:

— DHCP server. A feature that makes it easy to assign IP addresses to devices connected to the router. An IP address is necessary for correct operation in TCP / IP networks (and this is the entire Internet and the vast majority of modern “local sites”). In the presence of DHCP, this process can be carried out completely automatically, which makes life much easier for both users and administrators. However, the administrator can also set additional DHCP options — for example, specify a range of available IP addresses (to prevent errors) or limit the time of using one address. If necessary, you can even manually enter a specific address for each device on the network, without automatically adding new devices — DHCP also simplifies this procedure, as it allows you to carry out all operations on the router without delving into the settings of each subscriber device.

— Load balancing. A feature found on models that have two or...more channels to connect to the Internet (and other external networks); most often these are two or more WAN ports, but there is another option — one port, supplemented by support for 3G / 4G mobile networks. Anyway, the idea of balancing is to use several channels for external connection at the same time, dividing the load between them in one way or another. This allows you to increase the efficiency of the connection, achieving maximum data transfer speeds and at the same time avoiding unnecessary congestion. For example, a channel for online games can be separated from the rest of the connection, minimizing lags and reducing the likelihood of failures. As for load distribution, it can be either automatic (when the router itself determines the optimal channel for each device, depending on the current traffic consumption), or manual (when specific channels are prescribed for different network devices, applications, or even types of traffic).

— Channel reservation. Another feature related to the simultaneous use of several channels to connect to the Internet (or other external network). In redundancy mode, the router constantly uses the main channel (or several channels) for external connection, and in case of failures on this channel, it automatically switches to the spare (spare). This relieves the administrator of the need to manually organize the connection when the main connection fails; and the spare channel works only when it is indispensable, which in some cases allows you to avoid unnecessary costs. A typical example of working with redundancy in everyday life is the use of a wired Internet connection as the main channel and a 3G / 4G modem as a spare; although, of course, other, more specific options are possible.

— Port forwarding. The ability to redirect traffic from the router's own ports to the address of a specific computer (or other device) on the local network. When working in this mode, such a computer “outside” will look like it is connected to the Internet directly, without a router. This mode may be needed to use some specific functions — for example, working in HTTP server mode or participating in P2P networks.

— Cloning the MAC address. The ability to copy the MAC address of one of the devices connected to it to the router — so that when accessing the router, it is the address of this device that is visible, and not the router itself. The MAC address is a unique identifier assigned to each device with a WAN port. And the need to clone this identifier arises from the fact that some Internet providers use not only a login / password, but also the MAC address of a specific computer connected directly to the network to authenticate users. If, however, such a computer is supplemented with a router, then the provider's equipment will see a new, unfamiliar device, and will not give access to the network. Cloning the MAC address allows you to fix this situation as quickly and simply as possible.

— VPN support. Support for the VPN function of the router — virtual private networks. One of the key principles behind this feature is the transmission of encrypted data over open networks, primarily the Internet. A VPN is used mainly in two formats:

• Creating virtual networks based on an Internet connection. Thus, it is possible, for example, to combine branches of one company located in different cities or even countries into one logical network. At the same time, thanks to traffic encryption, the entire network remains closed to outsiders, although data is transmitted over an open channel. For this format, devices of the Firewall type (see "Type") are mainly used, while such a device actually plays the role of a VPN server.
• Internet connection through an external VPN server. The functions of such a server are in many ways similar to a proxy: it serves as an "intermediary" in the exchange of traffic and replaces the user's IP address with its own address. The latter, in particular, allows you to bypass regional restrictions: nowadays, servers with IP addresses related to almost any country in the world are available. However, a VPN server, unlike a proxy, additionally encrypts the traffic transmitted to the user — this, again, has a positive effect on security and privacy. This mode is also available in regular routers.

Note that the connection to the VPN server can also be “raised” on individual devices on the network (for example, through tools in some Internet browsers). However, using this feature on a router is often more convenient: you only need to set up a VPN once, you don’t have to fiddle with options for each individual subscriber, and any network device can use such a connection (including those that do not have their own VPN tools) . On the other hand, the connection speed when working through a VPN can drop noticeably, and enabling and disabling this feature on a router is usually more difficult than on user devices.

— DDNS. Short for Dynamic DNS — "dynamic DNS". This feature allows you to assign a permanent domain name to a device with a dynamic IP address. A domain name is the name of a device on the local network or the address of a site on the Internet (for example, m.ua or e-katalog.ru). An IP address is service information in the form of a digital code; it is thanks to her that network equipment can find the desired device and issue the required data from it. Actually, IP is the primary network "coordinates"; however, remembering addresses as a sequence of numbers is quite difficult, so domain names appeared — they are much more convenient for a person. Both on the Internet and in local networks, the connection between a domain name and an IP address is responsible for the so-called DNS servers: for each domain in the database of such a server, its own IP is registered. However, for technical reasons, situations often arise when the router has to use a dynamic (changing) IP; accordingly, in order for information to be constantly available on the same domain name, it is necessary to update the data on the DNS server with each IP change. It is this update that the DDNS function provides.

The security features provided by the device. Among the most common features of this kind are MAC address filtering, web content filtering, DoS protection, antivirus, antispam, and DMZ. Here is a more detailed description for each item:

— MAC address filtering. The ability to restrict network access for individual devices using data about their MAC addresses. Recall that the MAC address is a unique identifier assigned to each network device. And this function allows, for example, to open Internet access only for certain computers in the office, or to limit the connection to a closed corporate network for devices that are not on the “white list”.

— Protection against DoS attacks. A set of tools (software and sometimes hardware) to protect against DoS attacks. DoS (Denial Of Service — "denial of service") in a simplified form can be described as an attack on a computer system using a huge number of requests that the system cannot handle; as a result, access is difficult or impossible for ordinary users. Protection against such attacks can be carried out, in particular, by filtering suspicious requests or limiting the number of responses to requests per unit of time. However, the specific functionality and features of this protection should be specified s...eparately.

— Web content filtering. This function allows you to restrict or completely prohibit access of local computers to certain web resources. At the same time, filtering can be configured according to different criteria: by domain names, by categories (“adult” content, high traffic consumption, entertainment topics, etc.), by the type of content on the page (video, large images, certain scripts, etc.). n.) and others. Specific filtering features should be specified separately; however, anyway, this function allows you to set additional access rules. For example, it can be used to block access to non-work-related sites for employees in the office, or enable a parental filter on a home network.

— Antivirus. Antivirus — a tool for detecting and neutralizing malware — installed directly on the router. It is mainly used to analyze and filter network traffic, while many antiviruses are able to work in two directions — both for incoming and outgoing traffic. This allows not only to protect the network from outside attacks, but also to detect already infected local devices and prevent the distribution of confidential information, virus copies and other unwanted data. On the other hand, this feature increases the load on the router and can significantly slow down the connection speed. Therefore, it makes sense to use an antivirus on a router mainly in cases where individual devices on the network are poorly protected (or not protected at all), or if maximum protection is fundamentally important. It is also worth considering that the specific capabilities of the antivirus may be different, for each model they should be specified separately.

— Antispam. A built-in set of tools that allows you to analyze incoming mail traffic for spam and automatically filter these messages at the router level, preventing them from passing any further. This not only reduces the load on mail systems in the local network and facilitates mail filtering, but also has a positive effect on security: messages with malicious content simply do not reach the recipients. Note that when talking about antispam, they usually mean protection for classic email; for other communication methods (Viber, Telegram, etc.), such tools are not used for a number of reasons.

— DMZ. An abbreviation that stands for "demilitarized zone". By itself, this function allows you to create a segment in the local network that is open to external access; such a segment may host, for example, the company's Internet services. In its classic form, the DMZ is separated from the rest of the local network by a firewall, which provides the necessary security. At the same time, in some routers, this term may mean DMZ-host mode — a kind of "simplified version". When operating in this mode, the server open for external access is not separated from the local network, which simplifies setup, but reduces security; therefore, the DMZ host is found mainly among low-cost models designed for home use and small businesses.

The performance of a device of the Firewall type (see "Type") when operating in VPN mode — namely, when building a virtual private network using a firewall as a VPN server. It is indicated by the maximum volume of traffic that the device can process per second with such a connection.

For more information about VPN in general, see "Basic Features". Here we note that in this format of operation, the Firewall must additionally encrypt the transmitted traffic and decrypt the received, which creates an additional load on the device. Therefore, throughput in VPN mode is inevitably less than the overall performance of the Firewall (see above). It is worth choosing according to this indicator with a certain margin — at least 10 – 15%; this will give an additional guarantee in case of abnormal loads.

As for specific figures, VPN bandwidth up to 1 Gbps is considered relatively small, more than 1 Gbps is considered high.