Comparison BSD Racing Chebi 10 1:10 vs Himoto Bowie E10MT 1:10

— RTR (Ready to Run) — the box contains a fully configured and ready-to-run model. Such models are equipped with a battery, a remote control, and a charger.

— ATR (almost-ready to run). The model is almost completely ready for use, but some of the elements are still missing. The list of missing components can include both a battery and a remote control or charger. All of the above components may be missing at once. Missing parts must be purchased separately. Models in the ATR package are designed for advanced users, this package allows you to choose batteries or controls based on your own needs and requirements.

— PNP. the receiver and transmitter are not included in the package, and often there is no battery. Additionally, the PNP set may not contain control equipment. Radio models in the PNP configuration are designed for professionals who often use individual electronics. Usually, the design of the model itself is collapsible, which significantly increases the maintainability of the product. Many models sold in the PNP configuration are allowed to participate in prestigious exhibitions and competitions.

— K.I.T. For the most part, only body parts are provided in the kit. The kit has a lot in common with the designer, because from such a kit it is possible to assemble various options for the body of the radio model. The KIT package includes neither radio communication mod...ules, nor control equipment, nor electric motors. That is, the user will have to buy / manufacture all the hardware of the radio-controlled model on their own. Radio models in the KIT package are designed for advanced users. KIT kits are suitable for assembling advanced models, which are often used in prestigious exhibitions and sports competitions.

— Highway. Also known as "touring". These are cars that outwardly copy passenger cars — both ordinary production cars and tuned ones, and even special cars like NASCAR cars. They can have a ring or drift purpose (see above), in general, they have high speed and good handling.

— Buggy. Full-size buggy-type vehicles are light all-wheel drive vehicles for off-road driving, primarily sand, with a characteristic body structure (angular panels, open frame elements, safety arcs) and suspension (wheels are most often noticeably moved to the side on the suspension arms). Radio-controlled buggies have a similar design. The body, however, is often stylized as racing cars, but this type of specialization is primarily off-road — for example, many short-course models (see "Destination") are specifically buggies.

— Truggy. This class is in many ways similar to the buggies described above, but differs from them in larger wheel diameters, longer suspension arms and increased ground clearance (see below). This may slightly reduce the speed, but increases the throughput; truggies are used for both short-course and trick riding (see Purpose/Class).

— SUV (monster). As the name implies, such models copy monster trucks — cars stylized as pickup trucks, the most striking feature of which are huge wheels, powerful engines and corr...esponding chassis features (large suspension travel, high ground clearance). Like the full-size originals, radio-controlled monster trucks are in many ways similar to buggies (see above), and differ from them only in the described features. "Monsters" are relatively poorly suited for high-speed driving, but they have high cross-country ability, due to which models for tricks and short courses are found in this type (see "Destination (class)").

— Rally. Such cars are a cross between "touring" and full-fledged SUVs. Outwardly, they are similar to road models, but have significantly more suspension travel, more powerful engines and improved mud protection. At the same time, rally cars are not designed for full-fledged off-road driving, overcoming significant bumps, etc.; their maximum is a dense coating like packed sand or fine gravel.

— Crawler. A specialized type of radio-controlled cars designed to overcome obstacles. Externally, the crawlers are somewhat similar to the “monsters” described above, but differ from them in a higher suspension height, which provides a characteristic silhouette: a body raised high on long “legs”. This design allows crawlers to cope with difficult obstacles — like stone scree with steep slopes. Note that the speed characteristics of this category of cars are quite modest, because. the emphasis in them is primarily on high cross-country ability.

— Changeling. Models of cars that even turned over will be able to continue moving. At the same time, from different sides, the body of the machine may look different. Such models have good cross-country ability and are considered stunt models (see "Purpose (class)").

The highest speed that the machine can develop. Usually, this parameter is indicated for certain "perfect conditions": a flat track, high-quality fuel or a full battery charge (depending on the type of engine, see above), etc. Real figures tend to be somewhat lower; however, different models can be compared with each other according to this characteristic.

High maximum speed is important primarily for "racing" cars (ring and short-course, see above); in stunt and drift models, it does not play a decisive role. Also, you should pay attention to the maximum speed values when buying an amateur model for entertainment — here you need to take into account the features of its application. For example, if the machine is intended for a 3-4 year old child as a toy in an apartment, high speed will not be an advantage, but a disadvantage (especially since the cost of the “apparatus” directly depends on its speed).

— Protection against moisture. The presence of protection in the design of the machine, which prevents moisture from entering the sensitive elements of the structure and the corresponding unpleasant consequences (short circuits, corrosion, water hammer, etc.). This feature is practically mandatory for outdoor models, especially off-road types with internal combustion engines (see above). However, the specific degree of such protection differs significantly in different cases: one model can be designed, for example, for a maximum of splashes from wet asphalt or light rain, while the other will calmly survive driving through a puddle “hood-deep”. Therefore, this point should be clarified according to the official data of the manufacturer.

— Protection against dirt. Protection to prevent dust and dirt from entering parts that require cleanliness. Similar in many respects to the water protection described above — in particular, it is very important for outdoor use and can vary significantly from model to model.

— Centre differential. The presence in the design of the machine of a differential located between the front and rear pair of wheels and distributing torque from the engine between the front and rear axles. By definition, it is found only in models with all-wheel drive (see above). The main function of this mechanism is similar to cross-axle differe...ntials — it allows the wheels, in this case the front and rear, to rotate at different speeds so that the chassis and tyres do not experience increased loads. A similar need arises, in particular, when cornering at low speed. In addition, the centre differential improves patency: when one of the pairs of wheels slips, it distributes the torque so that most of it falls on the wheels that retain traction.

— Metal main pair. The main pair is called two gears responsible for transmitting torque from the engine to the transmission: one of them is located on the engine shaft, the second — on the transmission shaft. This is one of the most important structural elements of the machine, which is subjected to significant loads during use. The main pairs made of metal are much stronger and more reliable than plastic ones; if you are purchasing a model for riding in difficult conditions (for example, a short course or tricks, see "Purpose (class)"), the presence of such equipment will be very desirable. At the same time, for entertainment purposes, it is rather an excess — after all, metal gears are more expensive than plastic ones.

— Anti-roll bars. The presence in the design of the machine of special devices that prevent the tipping of the structure to one side, in particular during sharp turns: during cornering, the stabilizer distributes the load on the wheels in such a way as to reduce chassis roll. However, this is not the only purpose of these parts — stabilizers of different stiffness are also a tool for distributing the grip balance between the front and rear axles. For example, if the front stabilizer is softer than the rear, the grip of the front axle will be higher, which ensures good steering, but reduces the sensitivity of the control; with a softer rear stabilizer — on the contrary. These points are described in more detail in special sources. It is worth noting that stabilizers are not a 100% guarantee against a coup — however, the likelihood of such an event is significantly reduced if they are present.

— Metal deck chassis. The deck is the basis of the chassis of the machine, the frame on which the engine, transmission and body are placed. The high strength of the deck is important for models that are subjected to significant stress during riding, for example, when used for short corsets (see "Purpose (class)"). Aluminium alloys are often used as a material for metal decks in modern cars — they combine good strength and low weight. However such materials also affect the cost of the model, respectively.

— Opening doors. Opening doors enhance the similarity of radio-controlled cars with real cars. You can put a toy driver behind the wheel of such cars in miniature, and passengers in the passenger compartment. Also, through the doors, access to the interior of the radio-controlled car is provided.

— Light effects. The presence of various lighting effects in the model: headlights, parking lights, flashing beacons (flashing lights), bottom lighting, etc. Such equipment not only makes the machine look like a real car, but also makes it more noticeable to others and reduces the likelihood of unpleasant incidents. At the same time, for advanced models, these moments do not play a key role, so lighting effects are found mainly in inexpensive entertainment cars.

— Sound effects. The presence in the model of various sound effects — for example, a horn, a siren, the sound of a powerful engine, etc.; sometimes there are even built-in melodies. To play sounds, usually, a small speaker is provided. This function is purely for entertainment purposes and is found only in simple and inexpensive models designed for the younger age group.

— Driver. A toy pilot seated behind the wheel of a radio-controlled car. The presence of a pilot allows you to give free rein to your imagination - driving a car from a distance, you can imagine that it is being driven by a little man.

The capacity of the battery supplied with the electric motor model (see "Motor"). Indicated only for variants using original batteries (see "Battery type"), measured in ampere-hours: 1 Ah corresponds to the capacity at which the battery is capable of delivering a current of 1 A for 1 hour.

The higher the capacity of the battery, the longer, usually, the “device” is able to work without recharging. However, the practical time of operation on a charge is largely determined by other characteristics of the machine — scale, purpose (see both points above), weight, model and engine power, etc. Therefore, in most cases, this parameter plays a purely reference role, and it is only possible to compare the battery capacity among themselves with machines that do not have any significant differences in other characteristics.

The greatest distance between the remote control and the machine, at which the transmitter of the remote control is still able to guarantee normal controllability of the model. Note that official specifications usually provide data for perfect conditions: full battery charge, no obstacles in the signal path, extraneous interference, etc .; in fact, the range may be somewhat less. However, according to this parameter, it is quite possible to compare different models of radio-controlled cars with each other.

The higher this indicator, the farther you can let go of the machine from the remote control, the less often you have to move to keep control. However, a large range means not only a long range as such — it also speaks of a good signal penetration, its ability to pass through various obstacles.

The type and number of batteries required for the operation of the model control panel.

— AA. Replaceable cells, known in everyday life as "finger-type batteries". They can be produced not only in the form of disposable batteries, but also in the form of rechargeable batteries. In both cases, they are available in a wide range of items that differ in price and quality, which gives freedom of choice; batteries are sold almost everywhere and are inexpensive. The power and capacity of AA elements are relatively small, but in most cases they are quite enough for normal operation of the transmitter for quite a long time. Usually, modern remotes require several of these batteries — usually 2, 4 or 6.

— AAA. Replaceable cells, known as "mini finger" or "little" batteries. From the AA batteries described above, they differ only in their smaller size and, accordingly, in their capacity; the rest are completely similar. They are mainly used in remotes for inexpensive entertainment models: such remotes do not require a lot of energy, but compactness is sometimes crucial.

— PP3. Replaceable batteries of a characteristic rectangular shape, with a pair of contacts on one of the ends. They have a nominal voltage of 9 V. Such elements are quite popular in "entertainment" models designed for children — not least because only one battery is enough for the remote control.

— Accumulator. In this case, a specialized battery is meant, either of an original d...esign, or in a size that is not related to replaceable elements. These power supplies can be far superior to battery packs in terms of power and capacity, but they are not cheap, and such advanced features are rarely needed in fact. Therefore, battery remotes are found mainly among large-scale professional-level models, with increased requirements for the range and reliability of the transmitter on the remote control.

The wheelbase length is the distance between the front and rear axles of the car. This parameter determines a number of features of the behavior of the model in motion. So, a longer base provides stability during acceleration and predictability when cornering; in turn, a shorter one provides better cross-country ability, manoeuvrability and controllability in a skid. Of course, only models of the same type and scale can be compared with each other in terms of wheelbase length (see both points above); and this parameter is of key importance only for professional automodel sports.