Comparison pancake Makers

- Self-leveling. Pancake makers of this type work on the principle of a classic frying pan: in accordance with the name, when cooking, the batter is poured onto a heated surface, and the customer must determine the dosage of batter for each pancake himself. This, on the one hand, causes some inconvenience: for high-quality pancakes you need good dosage accuracy, otherwise the “product” may turn out to be either too thick or too thin; In addition, some pouring models do not have sides, and an “overdose” of dough can lead to it spilling over the edge of the working surface. On the other hand, determining the optimal dosage is usually not a problem (literally 2–3 attempts are enough for this), and by changing the amount of dough, you can easily adjust the thickness of the pancake as you wish. Thanks to all this, as well as the similarity with conventional frying pans, models of this type are most widely used.

— Submersible. Submersible pancake makers are a kind of opposite of self-leveling ones: when such devices operate, the dough is not poured onto the working surface, but on the contrary - the heated surface is immersed in liquid dough, which sticks to it, forming a pancake. This method of preparation is convenient because the dosage is essentially carried out automatically, and the risk of getting a pancake that is too thick (or too thin) is minimal, and the dough is distributed very evenly. At t...he same time, submersible models have higher requirements for dough quality than pour-over models; it is much more difficult to adjust the thickness of pancakes at your discretion on such pancake makers, and the procedure itself is quite unusual and can cause concern among inexperienced cooks. Therefore, such devices are not particularly widespread.

The largest number of pancakes that can be cooked on a pancake maker at one time. If there is a complete working surface that does not have clearly defined cells, it is considered that the device is designed for one pancake (although in some models the dimensions of such a surface can be very large, which allows, due to some tricks, to cook 2-3 pancakes at once). And for models with removable panels (see above), this parameter is indicated for the panel with the largest number of cells (and, accordingly, with the smallest pancake diameter).

"Multi-charge" pancake makers will be useful in situations where you need to cook not only a lot, but also quickly — for example, in large families or "pancake" cafes.

Now on the market there are pancake makers for such a number of pancakes: 1 pc, 2 pcs, 4 pcs, 5 pcs, 6 pcs.

The total power consumption of the pancake maker. In fact, the intensity of heating depends primarily on this parameter: usually, a more powerful device heats up faster to operating temperatures and is better suited for working with large volumes of dough. Therefore, high power, usually, is characteristic of models with a large diameter of pancakes or plenty of them (both points, see above). Note that manufacturers usually select the power in such a way that the pancake maker is guaranteed to be able to cope with the stated tasks. Therefore, this parameter is of secondary importance, and it is worth paying the main attention to more practically significant points when choosing — the type of device, the size and number of pancakes (see above), the heating temperature, additional features (see below), etc.

It is also worth mentioning that power affects the power consumption of the device — however, the indicators of modern pancake makers rarely exceed 1.5 kW, which does not create problems with a normal household connection.

— Non-stick coating. The crepe maker has a special non-stick coating on its surface, preventing the batter from sticking and ensuring hassle-free pancake making. This feature adds a slight increase to the price, but even affordable models have it. However, a drawback of some coatings like Teflon is their delicacy; small scratches can render them unusable. The official instructions should be consulted to know the specifics of the coating used in each model. Wooden or silicone spatulas are recommended for use with such surfaces and may be included as part of the accessories.

— Thermostat. The presence of a thermostat in the crepe maker is a device for adjusting the temperature of the working surface. This function allows you to optimally adjust the temperature to the specific composition of the dough and the thickness of the pancake — so that the product is optimally fried without burning or overdrying.

— Overheat protection. The presence of protection against overheating in the design of the crepe maker. Usually, such protection turns off the power to the heating element when the temperature rises critically, preventing breakdowns, fires and other unpleasant consequences.

— Heating indicator. The crepe maker is equipped with a special indicator that signals when the working surface reaches the optimal cooking temperature. Various indicator designs exist, such as two bulbs with one indicating the heating proc...ess and the other showing when it's ready, or a color-changing "sticker" material that reacts to the heat. It's important to note that basic indicators, which only show if the device is connected to power, do not serve as heating indicators as they don't provide temperature monitoring.

— Power base connection. The crepe maker features a power base connection, where the heating surface attaches to a special base using quick-release contacts. This design is particularly useful for immersion models, as it allows the power cable to remain connected to the fixed base, offering enhanced mobility during cooking without getting in the way. However, compared to traditional models, the ones with a base may have slightly less reliability due to wear on the contacts from constant connection and disconnection. Yet, this is not a significant issue, and these devices are generally durable enough for regular home use.

— Compartment for accessories. The presence in the design of the crepe maker of a separate compartment for storing accessories (see below). It is usually more convenient to keep additional equipment in such a place than in a separate bag, box, etc.: the compartments, usually, are optimally suited for complete accessories, and you can lose something from the equipment only together with the crepe maker itself. This function may affect the dimensions of the device, but this effect is usually negligible.

Additional accessories supplied with the crepe maker.

— Dough dispenser. It is a T-shaped tool that evenly spreads batter on the crepe maker's surface, ensuring a consistent thickness of the crepe. It is especially useful for models with large working surfaces where the batter may not spread evenly on its own.

— Spatula. Used for flipping pancakes and removing the finished product from the heated surface. It is typically similar in design to regular kitchen spatulas, but when purchased with the crepe maker, it is usually optimized for compatibility with non-stick coatings.

— Ladle. This accessory is used for pouring batter onto the crepe maker's surface. The ladle included with the crepe maker may have a volume that matches the size of the working surface, which may not be guaranteed if purchased separately.

— Container for batter. This accessory is essential for submersible models of crepe makers. It should ideally match the size of the working surface to ensure proper operation. Classic bulk models (see "Type"), on the other hand, do not have specific requirements for the batter container and can be used with regular kitchen bowls, so they are rarely equipped with this accessory.