United Kingdom
Catalog   /   Small Appliances   /   Kitchen   /   Food Dehydrators

Comparison Concept SO-1063 vs Concept SO-1020

Add to comparison
Concept SO-1063
Concept SO-1020
Concept SO-1063Concept SO-1020
from $53.28 up to $63.80
Outdated Product
from $39.16
Outdated Product
TOP sellers
Typevertical fruit dryervertical fruit dryer
Drying levels9 pcs9 pcs
Tray size315x255 mm
Tray height35 mm
Power consumption245 W245 W
Specs
Thermostat
Temperature range35 – 70 °C35 – 70 °C
Location of the fan (heater)bottombottom
Controlpush-buttoncontrol knob
Shutdown timer
Overheat protection
Tray materialplasticplastic
Added to E-Catalogmay 2016may 2016

Tray size

Horizontal dimensions of one dryer tray.

For round models, this paragraph usually indicates the diameter (for example, “Ø250”), for other cases — the length and width. Anyway, the information about the size allows you to estimate the total area and, accordingly, the capacity of the device. At the same time, note that a larger size affects the dimensions and weight of the structure, and also requires more heating power (ceteris paribus).

Tray height

The size of one tray of the dryer in height. In models where, instead of separate trays, a common working chamber with removable shelves is provided, the distance between two adjacent shelves is indicated.

This size primarily determines the thickness of individual pieces of vegetables, fruits, etc., which can be placed in the device. At the same time, note that the contents should not fill the tray tightly — there should be at least a couple of millimetres of space between the products and the “ceiling”. Also note that in some models, two height values can be indicated in this paragraph — for example, “15 — 25 mm”. This means that the size of the trays can be changed, adjusting them to the specifics of the situation; usually it is a choice between two standard heights (in our example — 15 mm and 25 mm).

Control

The control panel of a fruit dehydrators.

— Control knob. Mechanical control is carried out using rotary knobs and switches. Most parameters in such devices are set and controlled manually. In this case, the control elements are connected to the working parts of the dryer directly, without additional electronic circuits. This option is simple, reliable and low cost; however, it is only suitable for the most basic functions, but dehydrators for fruits, vegetables and mushrooms usually do not require more. But the obvious disadvantage of mechanical control is low accuracy: for example, a mechanical timer most often gives an error of a couple of minutes, which in some cases can be critical.

Push-button. Push-button control is based on electronic circuits. Such systems are more accurate than mechanical ones (for example, the timer in such dryers can usually be set with an accuracy of several seconds), and more options and modes are provided. On the other hand, such control is more complex and more expensive than mechanical control.

Touch. A type of electronic control with touch switches. Compared to push-button models, it provides a high level of comfort in operation, and looks more modern and aesthetically pleasing. Touch control is found mainly in top models of dehydrators.

Shutdown timer

A special device that turns off the heating after a predetermined time.

The presence of a timer greatly simplifies the use of the device: instead of monitoring the duration of the process and manually turning off the heater, it is enough to set the desired turn-off time in the settings. In addition, this function reduces the risk of forgetting about drying products and “overexposing” them in the dryer: this can only happen if the timer was initially set for too long.

Note that the type of timer directly depends on the type of control (see above); at the same time, mechanical timers are simple and inexpensive, but they have a rather noticeable error, and electronic ones are very accurate, but they cost accordingly more.
Concept SO-1063 often compared