United Kingdom
Catalog   /   Sound & Hi-Fi   /   Hi-Fi & Hi-End Components   /   AV Receivers

Comparison Yamaha RX-V781 vs Yamaha RX-V681

Add to comparison
Yamaha RX-V781
Yamaha RX-V681
Yamaha RX-V781Yamaha RX-V681
from $945.62 up to $1,090.00
Outdated Product
from $664.16 up to $918.00
Outdated Product
TOP sellers
Device typeAV ReceiverAV Receiver
CPU
DAC frequency192 kHz192 kHz
Audio DAC24 bit24 bit
Auto sound calibration
Auto level
Surround sound in headphones
Ultra HD4K4K
UpscalingUltra HD (4K)Ultra HD (4K)
3D
Multi Zone
Tech specs
Number of channels7.27.2
Power per channel
95 W /6 Ohm/
90 W /6 Ohm/
Signal to noise ratio110 dB110 dB
Acceptable acoustic impedance4 Ohm4 Ohm
Frequency range
10 – 100000 Hz /- 3 дБ/
10 – 100000 Hz /- 3 дБ/
Media player and tuner
Tuner and playback
AM/FM radio
USB drive
network streaming audio
internet radio
AM/FM radio
USB drive
network streaming audio
internet radio
Communications (interface)
Interfaces
AirPlay
Wi-Fi
Bluetooth
LAN
DLNA
AirPlay
Wi-Fi
Bluetooth
LAN
DLNA
Decoder support
Decoders
Dolby Atmos
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS Express
DTS 96/24
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS ES Matrix 6.1
DTS ES Discrete 6.1
DTS Neo:6
DTS X
Dolby Atmos
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS Express
DTS 96/24
DTS-HD High Resolution Audio
DTS-HD Master Audio
DTS ES Matrix 6.1
DTS ES Discrete 6.1
DTS Neo:6
DTS X
Inputs
RCA4 pairs4 pairs
Coaxial S/P-DIF2 шт2 шт
Optical2 шт2 шт
HDMI6 шт6 шт
Composite4 шт4 шт
Component2 шт2 шт
Phono
Control input (IR)
Outputs
RCA1 pairs1 pairs
HDMI2 шт1 шт
Composite1 шт1 шт
Component1 шт1 шт
On headphones6.35 mm (Jack)6.35 mm (Jack)
Preamplifier (Pre-Amp)
 /7.2/
Control output (IR)
Trigger output1 шт1 шт
Front panel
Headphone output
USB port
HDMI input
General
Power consumption300 W300 W
Standby consumption0.1 W0.1 W
Learning remote control
Smartphone control
Dimensions (WxDxH)435x379x171 mm
435x378x171 mm /with antenna — 435x378x234/
Weight10.6 kg10 kg
Color
Added to E-Catalogjune 2016june 2016

Power per channel

the maximum sound power that can be delivered by the power amplifier (if the receiver has one, see "Type") per speaker channel. It is worth noting here that in this case it is customary to indicate the so-called RMS (Rated Maximum Sinusoidal), or rated power. Rated is considered the highest power that the amplifier is guaranteed to be able to produce without interruption for an hour without any failures or breakdowns. Short-term jumps in the signal level can significantly exceed this value, but the main indicator is still the rated power.

The power of the amplifier largely determines the sound volume of the speaker system connected to the device. In fact, the loudness also depends on the characteristics of the speakers — sensitivity, impedance, etc.; however, other things being equal, the same acoustics on a more powerful amplifier will sound louder. In addition, this parameter also affects the compatibility of the speakers and the amplifier — it is believed that the difference in the nominal powers of these components should not exceed 10-15% (and ideally, the powers should generally match). And since different rooms require speakers of different power, this also affects the choice of amplifier for a particular environment; specific recommendations on the ratio of room characteristics and acoustic power can be found in special sources.

Also note that if the amplifier can operate with a load of different resistance (see..."Permissible acoustic impedance"), then for different options the power per channel will be different — the lower the resistance, the higher the power. In the characteristics, in this case, the maximum value of this parameter is usually indicated — that is, the power at the minimum allowable resistance.

HDMI

The number of HDMI outputs provided in the design of the receiver. The presence of several outputs allows you to connect several signal receivers at the same time (in the case of HDMI, these can be, for example, TVs or monitors) and select a playback device without reconnecting cables — by changing the settings of the receiver. And in models that support Multi Zone (see above), you can simultaneously broadcast different signals to different receivers.

HDMI is one of the most advanced digital interfaces used in modern electronics. It was originally developed for HD television and already in the first version it allowed to transmit a video signal with Full HD (1920x1080) resolution, accompanied by eight-channel (7.1, see "Number of channels") sound; in the future, the maximum resolution increased even more. Almost all modern TVs, monitors and plasma panels have at least one HDMI interface, the same applies to playback devices (players, media centers, etc.).

Preamplifier (Pre-Amp)

The presence of a preamplifier output (Pre-Amp) in the design of the AV receiver.

The preamp itself is the first stage of analogue signal amplification: it increases the power of the signal to a line level. This level is not enough to sound passive speakers, but it is already enough to send a signal to a power amplifier. However, in this case, not all preamplifier outputs are implied: ordinary paired stereo outputs are indicated as RCA pairs (see above), and only the so-called Pre-Amp counts as Pre-Amp. multichannel output. This output also uses RCA connectors, but these connectors cover all channels supported by the receiver: for example, in a 5.1 device, the Pre-Amp output will consist of 6 connectors. Such an interface can be very convenient when organizing multi-channel sound systems.
Yamaha RX-V781 often compared
Yamaha RX-V681 often compared