Wall height
The height of the walls is selected by the manufacturer depending on the type of pan (see above) and its size, however, similar products may vary in the height of the sides. In such cases, it is worth considering the features of the intended application. So, high sides are convenient for stewing, preparing sauces and other types of cooking that involve a large amount of liquid; in addition, they allow you to fit more content. On the other hand, deep pans are more expensive and heavier. The shallow depth, in turn, makes it easy to flip pancakes, omelettes and other similar dishes, but reduces capacity.
Lid material
The material of the lid supplied with the pan.
—
Metal. The main advantages of classic metal lids are high strength and impact resistance: you don't have to worry about breaking such a lid by accidentally dropping it on the floor (or something heavy on it). In addition, most metal lids are
oven-safe(see Extras). On the other hand, the metal is opaque, and the only way to determine the state of the cooking product is to lift the lid, which is not always convenient (especially if you have to check often). Also, this material is prone to scratches when washed with abrasive products, brushes, etc.
—
Glass. Glass lids appeared as an alternative to opaque metal ones. Their main advantage is obvious: the ability to observe what is happening in the pan without removing the lid. In fairness, it should be noted that fogging and pollution during the cooking process often impair visibility, but it is still higher than through metal. In addition, glass is better tolerated by “hard” washing with abrasive products. Of the shortcomings, it is worth noting, first of all, fragility and sensitivity to shock — there is a certain risk of cracking such a cover if handled carelessly. However, the construction usually uses fairly thick glass, and for such a nuisance you need a fairly strong blow, so in general, glass lids are quite safe.
— Ceramics. Ceramic lids are
...used exclusively in frying pans made of the same material (see above). Recall that such pans usually belong to tagines and are designed for cooking in the oven; the same material of dishes and lids contributes to uniform heating.
— Cast iron. Another lid material used in combination with the same material of the pan itself (in other words, cast iron lids are used exclusively with cast iron cookware). By most features, this material is similar to the metal described above: on the one hand, it is durable, on the other, it is opaque. The key difference between cast-iron covers and ordinary metal ones is their greater thickness. On the one hand, this contributes to the preservation of heat inside the dishes, on the other hand, it significantly affects the weight and cost. Therefore, this material is rarely found nowadays — mainly among stewpans and braziers (see above), for which the described advantages are more important than the disadvantages.Handle material
— Metal.
Metal handles, usually, are made of the same material as the pan — steel or aluminium (see above). Their main advantages are high strength and resistance to heat — in fact, the handle can withstand the same temperature as a frying pan. This ensures maximum fire safety: if you unsuccessfully leave the pan with the handle over the fire, the metal will only heat up, but will not catch fire, and you can put such a pan in the oven without problems. At the same time, this material is characterized by high thermal conductivity — in other words, the handle heats up very much along with the pan itself. Because of this, it is possible to remove the dishes from the fire only with the help of special devices (for example, rags — "grabbers" made of thick fabric) — holding the handle with bare hands, you can get burned.
—
Cast iron. The material used for the handles in cast iron pans (see "Pan Material"). It has all the characteristic advantages and disadvantages of metal handles (see above).
—
Bakelite. A kind of plastic; was created a long time ago, but is still widely used due to a number of advantages. In the case of frying pans, the main one is low thermal conductivity: Bakelite handles heat up so little that they can be fearlessly taken with bare hands when the pan is hot. In addition, this material is fireproof: even if you accidentally leave the pen ov
...er an open fire, it will not catch fire, at most it will char. For added safety, many handles of this type have a combined design: a small part, directly at the pan, is made of metal, the rest is Bakelite. In terms of strength and brittleness, this material is somewhat weaker than metals, but it can withstand most shocks and shocks without problems, and is insensitive to scratches, moisture and chemicals. As a consequence, handles of this type have become widespread in modern frying pans. The most striking disadvantage of bakelite can be called poor suitability for use in the oven; however, dishes with removable handles can correct the situation (for both points, see "Additionally").
— Wood. The wooden handles have a nice "classic" look, but they conduct almost no heat, which allows them to be handled with bare hands. At the same time, this material is quite sensitive to moisture, dirt, prone to cracking and relatively short-lived; and its fire safety is very low — a handle carelessly placed over a fire can easily be charred, or even catch fire. In addition, such handles are not suitable for ovens, they must be removed (if such a possibility is provided, see "Additional") or other dishes should be used in the oven. As a result, wood is quite rare in modern frying pans and is a kind of image material intended for lovers of traditional design.
— Silicone. By itself, this material is too soft for use in the handles of pans in its pure form; therefore, in this case, a metal handle with a silicone overlay is usually meant. Silicone provides good thermal insulation, such handles, usually, can be safely taken even when the pan is heated; besides, they are softer and more pleasant to the touch than, for example, bakelite. Among the shortcomings, it is worth noting the sensitivity to strong heat, which is why in pans compatible with ovens, silicone handles have to be made removable.Non-stick coating
The type
of non-stick coating used in the pan (if present — some pans
are not specially coated).
If the characteristics simply indicate the presence of a coating, without specifying its type, it should be assumed that this is most likely Teflon (functional, but short-lived and requiring careful handling — see below for more details). This will give the maximum guarantee against various troubles. And here is a detailed description of the different types of non-stick coating:
—
Teflon. Coating based on polytetrafluoroethylene, also known as Teflon. One of the most popular options in modern frying pans is relatively inexpensive, very convenient to cook, and easy to clean. At the same time, this material has its own characteristics in use. First of all, it should be protected from scratches as much as possible: when cooking, you should use a wooden or silicone spatula (not metal, not to mention knives), and when washing, you should not use abrasive products and metal sponges (however, this is usually not required). If a scratch or some other damage still appears, you can’t use a Teflon pan — it starts to release harmful substances, the only option is to replace the dishes. This coating is sensitive to overheating (the release of harmful substances also begins, cracks may appear), it cannot be used on high heat and is not recommended for use on electric stove
...s. In addition, it is believed that the thickness of the Teflon pans was at least 5 mm, preferably a multi-layered bottom(see "Additional"). Also note that even the highest quality Teflon, with the most careful handling, has a limited service life — usually about 5 years.
— Ceramic. A coating created as an attempt to eliminate some of the shortcomings of Teflon. Its main advantage is complete harmlessness: ceramics do not emit harmful substances at high temperatures and scratches. At the same time, it is rather difficult to scratch it, and therefore you can use spatulas made of any material with a frying pan, wash it with abrasive products, etc. In addition, this coating looks quite aesthetically pleasing. At the same time, it is a type of glass and, like any glass, is quite sensitive to shock. Another drawback is the delicacy in washing: hot ceramic pans cannot be placed under cold water (otherwise cracks or even chips may appear), and they are poorly compatible with dishwashers.
— Stone (marble). This category includes all coatings reinforced with interspersed stone chips. The material of such inclusions can be different: marble, granite, other minerals, including their combinations. Such solutions are usually more stable and durable than Teflon, however, the specific properties may be different, so the operation features must be specified in the instructions for the dishes.
— Titanium. Titanium-based non-stick coatings are remarkable primarily for their high strength. So, if it is recommended to use wooden spatulas on all other varieties, then titanium surfaces often allow work with metal appliances (however, this point still does not hurt to clarify according to the instructions for the pan). On the other hand, such coverage is quite expensive.
— Enamel. Enamel-based coatings are notable for good strength and scratch resistance, they normally tolerate contact with forks and even knives, and are not afraid of overheating. The non-stick properties of such coatings may be somewhat worse than other varieties, but it all depends on the specific type of enamel. Of the unequivocal disadvantages, one can name a relatively weak thermal conductivity and the likelihood of chips during impacts and falls. In addition, some types of enamel have a microporous structure and require more oil when frying than other types of coatings. Therefore, this option is relatively rare.
— Is absent. The lack of a non-stick coating in the design of the pan is not always a clear disadvantage. Firstly, additional coatings inevitably affect the price (and the better the composition, the more expensive it is); secondly, many of them require careful handling (see above). Thus, uncoated pans are less expensive and easier to clean (although the cleaning itself can be quite a laborious process). It should be noted that some materials themselves have non-stick properties; a typical example is cast iron (see “Frying pan material”).In box
Additional accessories supplied with the frying pan.
—
Lid. The presence of a lid in the delivery set will save you from the hassle of choosing: the “native” lid is optimally suited not only in size, but also in terms of the design features of the pan.
— Handle pads. Removable pads on the main handle of the pan. Such devices protect your hands from burns and allow you to safely grasp the handle, even if the pan is very hot. And they are made removable mainly so that the dishes can also be used in the oven without restrictions.
—
Spatula. By purchasing a frying pan in this configuration, you do not have to buy a spatula separately; this can be useful, for example, if you equip the kitchen from scratch. Another point is that the included spatulas are, by definition, suitable for coating the pan — this is especially important for Teflon or "marble" (see "Non-stick coating").
—
Lattice. The grate is most often supplied with wok pans (
round shape), in this case it is semi-circular. When cooking, it is placed on top of the pan and covers half. The main purpose of such a grate is to place pieces that have already been fried; however, they do not cool due to the heat from the pan. Also, the grate can be found in grill pans, for which there is a cutout in the central part for the burner. Thus, the fire dir
...ectly interacts with the cooked products.
— Stand. A stand made of wood or other heat-insulating material is mainly equipped with portioned pans. For more information about such dishes, see "Type", but here we recall that it is used not only for cooking, but also for serving dishes — and when placing a hot frying pan on the table, you cannot do without a stand. In addition, pans of other types can be supplemented with a similar accessory — in such cases, the stand is intended mainly for additional convenience when cooking. For example, she put a hot pan with a ready dish on the kitchen table, freeing the burner for other dishes.Country of origin
Country of origin of the brand under which the pan is marketed. Usually, it is indicated by the "homeland" of the manufacturing company or by the location of its headquarters.
There are many stereotypes associated with the “nationality” of brands and products, but most of them have no basis nowadays. First, the actual place of production is often different from the brand's country of origin. Secondly, the quality of the goods depends not so much on geography, but on the policy of a particular company and how carefully this very quality is controlled in it. Therefore, you should pay attention to the country of origin of the brand only if you fundamentally want or (do not want) to support a manufacturer from a certain state. Quality is best judged by the reputation of a particular brand and the general price category.
