United Kingdom
Catalog   /   Tools & Gardening   /   Garden Tools   /   Garden Sprayers

Comparison STIHL SR 420 vs Dnipro-M 3WF-3

Add to comparison
STIHL SR 420
Dnipro-M 3WF-3
STIHL SR 420Dnipro-M 3WF-3
from $461.96
Outdated Product
from $103.96 up to $128.40
Outdated Product
TOP sellers
Typepetrolpetrol
Designbackpackbackpack
Specs
Volume13 L14 L
Productivity (liquid)1.81 L/min
Max. spraying distance12 m
12 m /horizon, 8 m — vertical/
Wand typewidewide
Wand materialplasticplastic
Motor
ICE type2-stroke2-stroke
Cylinder volume56.6 cm341.5 cm3
Power3.5 hp2.9 hp
Power2.6 kW2.1 kW
Fuel tank capacity1.5 L
Starterby handby hand
General
Spray lock
Replaceable nozzles
Noise level101 dB
Weight11.1 kg10.5 kg
Added to E-Catalogfebruary 2016february 2016

Volume

The nominal volume of the sprayer tank. Usually, in this case, the working volume is indicated, and not the full capacity (“for the cork”).

The more capacious the sprayer is, the more work can be done with it without refueling. On the other hand, a large volume accordingly affects the price, dimensions, and most importantly, the weight of the unit (and not only in a filled, but also in a “dry” state). Therefore, even with large volumes of work, it is sometimes more rational to use a relatively small unit, refueling it several times.

Detailed recommendations on the optimal volume of the tank for a particular situation can be found in special sources. With regard to specific values, in the most compact manual sprayers (see above), the capacity does not exceed 2 liters. Tanks for 2.1 – 5 liters can be found both in hand-held devices, and in pump-action and battery models (see "Type") with a shoulder carry. Sprayers for 5.1 – 10 liters are almost all made shoulder-mounted, the capacity of gasoline units actually starts from 10 liters, and the most capacious modern sprayers have tanks of more than 15 liters.

Productivity (liquid)

Maximum performance of the sprayer when working with liquid; Please note that in pump (see "Type of pumping") and battery (see "Type") models, the actual performance may decrease as the air supply or battery charge is exhausted.

High performance allows you to quickly process large areas; moreover, it is often combined with a good spraying distance (see below). On the other hand, such models require fairly large tanks — or they often have to be refilled; neither one nor the other contributes to the convenience of work. In addition, over-capacity is even more undesirable than under-capacity: a low-capacity sprayer will just take longer to process, and a too-capacity sprayer can ruin the job by “overdosing” the chemical. Therefore, it makes sense to use high-performance devices only for specific tasks.

Detailed data on optimal performance values for different situations can be found in special sources.

Cylinder volume

The volume of one cylinder in an internal combustion engine installed in a sprayer. In fact, we are talking about the working volume of the entire engine, because. in this technique, only single-cylinder internal combustion engines are used.

In general, a large cylinder volume allows you to achieve high power, but power also depends on some engine characteristics (primarily the type of internal combustion engine, see above). And the performance characteristics of the sprayers themselves with the same engine power can also be different. But what directly depends on the volume of the engine is fuel consumption: a larger volume, usually, requires more fuel.

Power

Engine power of the gasoline sprayer (see "Type") in horsepower.

Power directly affects the spraying range and the performance of the unit, according to this indicator, it is quite possible to assess the overall level of the device. However note that manufacturers can indicate this characteristic in different ways: some give the rated power (when the engine is running in normal mode), others give the maximum power (at peak load). Therefore, when choosing and comparing, it is worth considering not only this indicator, but also other basic characteristics.

As for horsepower, this unit is traditionally used to assess the power of an internal combustion engine. 1 HP approximately equal to 735 watts.

Power

Sprayer engine power in kilowatts. Watt (kilowatt) is a universal unit used for all types of engines, but in fact this parameter is indicated mainly for gasoline units (see "Type"). This is due to the fact that electric sprayers — even the most powerful and heavy ones — consume less than 1 kW, which does not create any problems with connecting to a conventional outlet; so for such units there is no need to specify engine power.

Power directly affects the spraying range and the performance of the unit, according to this indicator, it is quite possible to assess the overall level of the device. However note that manufacturers can indicate this characteristic in different ways: some give the rated power (when the engine is running in normal mode), others — the maximum (at peak load). Therefore, when choosing and comparing, it is worth considering not only this indicator, but also other basic characteristics.

As for specific figures, in the most modest models this figure does not exceed 1 kW ; 1.1 – 2 kW can be called the average value; and many gasoline sprayers are equipped with motors and more than 2 kW.

Fuel tank capacity

The volume of the fuel tank in the petrol sprayer (see "Type").

Knowing the fuel consumption (see below), the volume of the tank can be used to estimate the time of continuous operation without refueling. In general, a larger tank, on the one hand, allows you to work longer between refueling, on the other hand, it affects the dimensions and weight of the entire unit. In addition, the power of the internal combustion engine in the sprayers is relatively low and they require little fuel, and you still have to fill the main tank every few minutes. In light of all this, manufacturers usually install tanks in sprayers with a volume of 0.5 to 2 liters — this is quite enough for at least half an hour of work (often more).

Spray lock

A device that allows you to fix the trigger (switch) of the sprayer in the pressed position. This is especially convenient for large volumes of work: holding the trigger manually for a long time is rather tiring, and the continuous watering lock allows you to avoid unnecessary stress on your hands.

Note that this feature can be found in all types of sprayers (see above), including lever ones — many models with this type of action are equipped with both a pumping lever and a separate trigger that must be kept pressed during operation.

Replaceable nozzles

The ability to change nozzles — sprayer working nozzles.

Different nozzles differ primarily in terms of spraying distance and width of the plume, as well as the degree of spraying (particle size). In addition, specific nozzles can be used in sprayers — for example, for working with powder. Replacement nozzles are usually included in the delivery, but this point (as well as the range of nozzles) is still worth clarifying separately.

Noise level

The average noise level produced by the sprayer during normal operation.

The “loudness” of operation largely depends on the type of sprayer (see above): for example, battery units are generally much quieter than gasoline ones. Anyway, the lower this indicator, the more comfortable the use of the unit, especially during long-term work. Note that the decibel is a non-linear quantity, and therefore it is best to evaluate the noise level using special comparative tables.

The most "quiet" models are manual: the noise level in them is so low that it is often not indicated at all in the characteristics. Yes, and low-power battery models can work with a volume of 30 – 35 dB, which can be compared with a muffled conversation. In more advanced versions, the noise can reach 70 dB — this is already comparable to a loud conversation. For gasoline models, the same 70 dB is, in fact, the minimum indicator, while the maximum value exceeds 100 dB (the noise of an industrial workshop or a tractor engine).
STIHL SR 420 often compared