United Kingdom
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Paint Sprayers

Comparison Stal F 750 P vs Belarusmash BPK-1150

Add to comparison
Stal F 750 P
Belarusmash BPK-1150
Stal F 750 PBelarusmash BPK-1150
from $28.84 up to $32.44
Outdated Product
from $32.72 up to $34.96
Outdated Product
TOP sellers
Devicepaint sprayerpaint sprayer
Typecordedcorded
Specs
Power consumption750 W1150 W
Rated pressure0.4 bar
Paint consumption0.18 L/min0.18 L/min
Nozzle size2 mm
Sprayingpneumaticpneumatic
Containerbottombottom
Container volume800 mL800 mL
Tank materialplasticplastic
General
Remote compressor
Weight2.1 kg1.8 kg
Added to E-Catalogseptember 2015september 2015

Power consumption

The power consumed by the operation of an electric tool (see "Type").

Most modern spray guns, even performant ones, have a rather low power: for example, models with more than 1 kW are extremely rare, and in most cases, power consumption does not exceed 500 W at all. So when connecting such equipment to sockets, there are usually no problems; only single units of high performance, requiring 3.5 kW or more, have to be connected according to special rules (directly to the shield). In other cases, data on power consumption is most often not needed for normal use and may be required only for specific tasks — for example, to calculate the load on an autonomous generator.

Rated pressure

Nominal air pressure in the spray gun.

The general meaning of this parameter depends on the type of instrument (see above). So, in pneumatic models, nominal pressure data is required for connection to an external compressor. It is this pressure that this compressor must create at the inlet to the atomizer; too low values will lead to a decrease in efficiency, too high are fraught with breakdowns and even accidents with injury to others.

In turn, for electric models, the nominal pressure is the air pressure created by the unit's own compressor; the complete atomizer was originally designed for the same pressure. So in this case, this parameter is more of a reference than practically significant; it may be useful only for connecting replacement nozzles to the compressor (or vice versa, for using an existing nozzle with a third-party compressor).

As for specific pressure values, they are primarily determined by the spray system (see below). The diversity here is quite high: the most modest units give out less than 2 bar, 2-5 bar compressors are quite popular , 5-10 bar models are relatively rare, and some powerful performance solutions provide a pressure of 100 bar or more.

Nozzle size

The diameter of the nozzle at the outlet of the spray gun.

It is from this nozzle that paint or other working material comes out. And the productivity and spot size at the exit depend on the diameter. Accordingly, larger nozzles are better suited for processing large surfaces, while smaller nozzles provide greater precision and accuracy. Thus, this parameter is directly related to the type of device (see above). There are also spray guns with a replaceable nozzle, when more than one nozzle is provided in the kit, which expands the possibilities of using the device.
Stal F 750 P often compared
Belarusmash BPK-1150 often compared