United Kingdom
Catalog   /   Home & Renovation   /   Smart Home & Security   /   Surveillance DVR Kits

Comparison Tecsar AHD 4OUT Light Lux vs Hikvision DS-J142I/7104HGHI-SH

Add to comparison
Tecsar AHD 4OUT Light Lux
Hikvision DS-J142I/7104HGHI-SH
Tecsar AHD 4OUT Light LuxHikvision DS-J142I/7104HGHI-SH
from $199.20 up to $269.20
Outdated Product
from $240.56 up to $295.96
Outdated Product
TOP sellers
Recorder
hybrid
hybrid
Camera typedirectionaldirectional
Connectionwiredwired
Video channels44
Number of drives spaces11
Max. capacity10 TB4 TB
Pointed cameras
Pointed cameras44
Camera modelAHDW-2Mp-20FI-lightDS-2CE16D1T-IR
Martix typeCMOSCMOS
Matrix size1/2.8"1/3"
Number of megapixels2 MP2 MP
Focal length3.6 mm3.6 mm
Horizontal viewing angle90 °
Illumination range20 m20 m
Water resistanceIP66
Camera control
PTZ (managed)
Mobile app
Connection connectors
BNC video input44
RCA audio input11
LAN (RJ-45)11
USB2
/2.0/
HDMI11
VGA11
Video recording
Recording resolution1920x1080 px1920x1080 px
Frame rate12 fps
Video compression formatН.264
Added to E-Catalogmarch 2017march 2017

Max. capacity

The largest storage capacity with which the recorder is able to work normally.

The more capacious the drive, the higher the processing power of the system in which it is used should be. Therefore, any modern registrar has limitations on disk capacity. However, even in the most modest models, this figure is about 2 TB, in most cases this is quite enough to work with the capabilities provided in this particular registrar.

Camera model

A model of pointed cameras supplied with a video surveillance kit. Knowing this data, you can find detailed information on the cameras and clarify their characteristics. Also, if you buy additional cameras of the same model, you don't have to worry about compatibility.

Matrix size

The physical size of the sensor in the pointed cameras is diagonally, in inches (fractions of an inch).

The larger the sensor, the less prone it is to noise, the better image quality it can provide, and the better it is suited to low light conditions. This is due to the fact that each individual pixel gets more light, because. on a large matrix and individual dots are larger. On the other hand, large matrices are more expensive.

Horizontal viewing angle

The viewing angle of the directional cameras supplied as standard is horizontal.

Wide viewing angles allow you to cover a large area; this is especially important given that directional cameras are often made stationary. On the other hand, all other things being equal, a larger viewing angle will mean a lower degree of magnification - objects will look smaller, detail will be worse. Therefore, when choosing according to this parameter, you should proceed from what is more important - a wide field of view or “range”.

Water resistance

The degree of protection of the camera from moisture and foreign objects according to the IP standard. Thanks to it, it is possible to select waterproof models available for full outdoor use.

This protection describes how much the camera body protects sensitive internal components from these impacts. Standardly, it is denoted by the letters IP followed by two numbers. The first digit means protection against penetration of solid objects and dust; its individual values correspond to the following levels of protection:

1 - protection from objects with a diameter of more than 50 mm (large body surfaces)
2 - from objects with a diameter of more than 12.5 mm (fingers, etc.)
3 - from objects larger than 2.5 mm (most instruments)
4 - from objects more than 1 mm (almost all tools, most wires)
5 - dust protection (complete protection from contact; dust can penetrate inside, but does not affect the operation of the device)
6 - dust-tight (case with complete protection from dust and contact).

The second number characterizes protection against moisture, here the values can be as follows:

1 — protection from vertically falling drops of water;
2 - from water drops with a deviation of up to 15° from the vertical axis of the device;
3 - from water drops with a deviation of up to 60° from the vertical axis of the device (the minimum level that allows you to operate the c...amera in the rain);
4 - from splashes from any direction;
5 - from jets from any direction;
6 - from sea waves or strong water jets;
7 - possibility of short-term immersion to a depth of up to 1 m (without the possibility of constant operation in submerged mode);
8 - possibility of long-term immersion to a depth of more than 1 m (with the possibility of constant operation in submerged mode).

Of course, surveillance cameras are usually not designed to be submerged under water - the last two options only characterize a high degree of moisture resistance.

In some models, one of the numbers may be replaced by the letter X - for example, IPX7. This does not mean that there is no protection, but that the corresponding parameter is not certified to the IP standard. At the same time, the degree of uncertified protection can be quite high - for example, the example above corresponds to the possibility of complete immersion under water, which requires a high degree of closure (at least dust resistance level 5). We also note that the complete absence of IP marking also does not mean that the camera is absolutely not protected from negative influences - again, the point is that the body simply did not undergo official certification. However, if dust and moisture protection are critical, you should choose among IP-certified models.

PTZ (managed)

Support of the complete registrar of controllable PTZ cameras.

Lenses in such cameras are able to rotate from side to side and up and down, as well as change the degree of image magnification (however, not optics, but digital zoom may be responsible for the latter). Thus, the area covered is significantly expanded (although part of it is constantly behind the scenes), and the operator can direct the camera to the point of interest to him. In addition, the movement of cameras can be automated — for example, programmed to constantly turn from side to side, to aim at the door when the lock is triggered, etc.

Support by the PTZ recorder is mandatory for the normal operation of cameras with this function. At the same time, the controlled cameras themselves in this case may be included in the kit, but this is not necessary, so their presence should be specified separately.

Frame rate

The highest frame rate at which the complete recorder can record at full load when all video channels are used. In other words, this is the guaranteed maximum frame rate that can be achieved at any load level (with some channels idle, the number of frames per second may be higher, but not necessarily).

The higher the frame rate, the better fast movement will be captured, the less blurry objects in such scenes will turn out. On the other hand, this indicator directly affects the cost of equipment and the amount of memory occupied by the footage. For video surveillance systems, an indicator of 24 fps is currently considered the minimum necessary, 50 – 60 fps is not bad, and in the most advanced registrars this number can reach 120 fps.

Video compression format

The format in which the kit recorder records digital video.

This setting determines the codecs required to view content on external devices. When viewing on a computer with codecs, there are usually no problems: their set in modern operating systems is quite extensive, and the missing modules, usually, are easily found and installed via the Internet. But if you plan to view video materials through a media centre, a TV with direct playback via USB, etc. — It is worth making sure that this device supports the appropriate compression formats.

Technical details on different standards can be found in special sources.
Tecsar AHD 4OUT Light Lux often compared
Hikvision DS-J142I/7104HGHI-SH often compared