Rotation speed
The maximum disc rotation speed provided by the motor of the electric tile cutter. Higher speeds are good for productivity, clean cuts and the ability to handle difficult materials, but they also require the right amount of power.
In general, if a tile cutter is bought for simple work with ordinary facing tiles (for example, repairs in an apartment), you can not pay much attention to this indicator: even the “slowest” models provide enough speed to cope with such tasks. But for cutting specific materials (for example, some types of stone), higher speeds may be required; detailed recommendations on this issue can be found in special sources.
Disc diameter
The nominal diameter of the cutting disc for which the electric tile cutter is designed. A disk of a larger diameter will simply not fit into the seat; but the use of smaller nozzles in some cases is allowed (but not recommended).
The depth of cut depends primarily on the diameter of the disc (see below). So, with ordinary tiles, having a thickness of up to 1.5 cm, almost any disc, even the smallest one, will cope; but for thicker materials (for example, paving slabs) and the appropriate tool will be needed. However it is worth noting that with the same diameter of the disc, the thickness of the cut may be different.
Also, the size of the cutting tool allows you to generally evaluate the class of the tool: the larger the disc, the more powerful and performant the tile cutter, usually.
Cutting length
The longest cut that can be made with a tile cutter.
This parameter is relevant primarily for manual tile cutters, as well as for electric stationary units with a top disc feed. In such tools, the cutting element moves along the guide rail and has limited space for movement, and the length of the cut is, in fact, the length of the stroke of the cutting tool from one extreme point to the other. In fact, this is the maximum width of the material that can be cut with a tile cutter.
Cutting depth
The greatest depth to which the tool can cut through the material being processed, in other words, the maximum thickness of the tile that the tile cutter is guaranteed to be able to cut.
It is worth choosing a tool for this parameter taking into account the thickness of the material with which to work, plus some margin “just in case”. But this margin should not be too large: for a
deep cut, large discs and high power are required, which accordingly affects the price, weight and dimensions of the tool.
Side platform
The presence of
a side platform in the design of the tile cutter.
Such a platform is found mainly in electrical stationary units (see "Type"). It looks like a small platform, "extending" the main working platform to the side of the cutting line. This provides additional support for the cut tile, which is especially important when cutting large pieces: without a side platform, such fragments have to be supported by hand in order to avoid falling and damage, and this is not very convenient.
Transportation wheels
The presence of
transport rollers in the design of the tile cutter — small wheels for transportation from place to place.
This feature is found exclusively in electric stationary models (see "Type"): the weight of such units is estimated at tens of kilograms, and it would be very difficult to carry them on weight. In turn, the transport rollers allow one person to roll the tile cutter without much difficulty. At the same time, the design of the rollers is chosen in such a way that they do not affect the stability of the unit in the working position: for example, in some models the wheels can be removable, in others they are located only on one side, and to support the wheels, the unit must be raised in the manner of a garden wheelbarrow , etc.
Table dimensions
The size of the working surface of the stationary tile cutter (see "Type"). The larger the table, the lower the likelihood that the tiles will hang from it during operation.
