Comparison URAGAN 90190 vs URAGAN 90170

Presence of two cylinders in the pump/compressor design.

This feature is found primarily among compressors (see “Type”). It is generally a sign of a powerful, high-performance device: two working cylinders allow twice as much air to be pumped per cycle as in a single-cylinder model with the same diameter and piston stroke. This can be especially convenient when inflating large wheels—on trucks, buses, heavy-duty SUVs, etc. The downside of this design is its increased weight and dimensions, as well as higher energy consumption due to the additional resistance at the pistons. Therefore, it makes sense to consider such devices when high performance is a decisive factor for you.

Foot pumps with two cylinders are also available; they have the same characteristics.

The maximum pressure provided by the pump or compressor — in other words, the highest tyre pressure that can be achieved using this unit.

In most models, this figure is from 2.5 to 10 atm, and in mechanical pumps (manual and foot, see "Type") pressure of more than 10 atm is practically not found at all. This is due to the fact that even for heavy trucks, the optimal tyre pressure is usually about 5 – 9 atm (depending on a number of parameters — there are special formulas and tables for calculations); and in passenger car tyres, a pressure of more than 2.5 atm is extremely rarely used. However, there are compressors with higher pressure parameters — 11 – 15 atm, 16 – 20 atm and even higher. The meaning of such characteristics is mainly in the "power reserve": a higher working pressure contributes to faster pumping. However, be careful not to over-inflate the tyre and damage it.

The capacity of the compressor (see "Type") is the maximum amount of air that it can pump into the tyre in a minute.

Higher performance reduces the time required to inflate the wheel; on the other hand, this parameter directly affects the dimensions, weight, power consumption and price of the compressor. So it is worth choosing according to performance, taking into account real needs. So, for a “duty” tyre inflation in a passenger car, a compressor with a low operating speed is quite enough — up to 20 L / min inclusive. And if the speed of full pumping is also important for you (for example, after replacing the rubber) — you can choose a unit for 21 – 40 L / min. In turn, models with more solid characteristics — 41 – 60 L / min and more — are intended mainly for heavy equipment like SUVs, trucks, tractors, etc.

Separately, it should be noted that this parameter is NOT suitable for calculating the exact inflation time (even if the exact volume of air in the wheel is known). The fact is that the actual performance of the compressor is always lower than the claimed one: the figures in the characteristics are indicated for free air outlet, and when pumping the wheels, the pumping speed will inevitably be lower due to the resistance of the nipple.

Methods of connecting to a power source provided by the compressor’s design (see “Type”).

— Cigarette lighter. Connection to a standard cigarette lighter socket (or a separate automotive socket of the same format). This method is convenient because you do not need to open the hood to operate the compressor. On the other hand, cigarette lighter sockets have maximum power limitations, and these limitations can vary considerably between different vehicles (and even between different sockets in the same vehicle). For details, see “Power consumption”.

— “Crocodile clips”. Direct connection to the battery terminals using crocodile-style clamps. This method is somewhat more complicated than operating from a cigarette lighter socket—you need to open the hood and run the wires to the battery. On the other hand, it allows the vehicle’s electrical system to be used at full capacity, without worrying about overloads or the integrity of the fuses, making it suitable even for the most powerful and high-performance compressors. In addition, the device can be connected with crocodile clips not only to the vehicle’s electrical system but also to a separate battery; in some cases, this option can be useful (for example, if the vehicle’s own battery is already running low but a charged battery is available nearby).

— Cigarette lighter/“crocodile clips”. The opti...on to use either of the connection methods described above, as preferred. This provides convenience and allows you to choose the optimal operating format depending on the situation. For example, you can use the cigarette lighter socket to quickly inflate one or two tires, while power through crocodile clips is better suited for extended operation.

— Plug. A plug for connection to a standard 230 V socket (see “Power supply”). Used in compressors that have only this type of power supply.

— Cigarette lighter/plug. An option found in models that can operate from both 12 V and 230 V; the cigarette lighter socket is used for the former, and the plug for the latter.

— Cable (to the battery). Direct connection to the battery using cables with flat contacts, which are secured in the battery terminals when connected. This design provides a more secure connection than the “crocodile clips” described above, but is less convenient when connecting and disconnecting the compressor.

The length of the hose through which air is pumped into the tyre. The larger it is, the more convenient the device is to use. But it is rare that the compressor is left far from the wheel, especially if a pressure gauge is placed on the device, which must be periodically checked. For domestic use in cars, a one and a half metre long hose is enough. Powerful and performant models can be equipped with a hose of 7 metres or more, but these are more solutions for commercial use in car services.

The model is additionally equipped with a flashlight to illuminate the work area in the dark. A very useful feature, especially for small, portable compressors for cars — can help out if you need to pump up the wheel at night in the middle of the road. Depending on the modification, the lamp can support various modes of operation — constant light, flashing mode, SOS signal (see the description of each individual compressor model). The design may also differ — the flashlight can be built-in or removable.