United Kingdom
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Schock Aster D-150 780x500 vs Schock Manhattan D-150S 770x510

Add to comparison
Schock Aster D-150 780x500
Schock Manhattan D-150S 770x510
Schock Aster D-150 780x500Schock Manhattan D-150S 770x510
from £196.80 
Outdated Product
from £327.69 
Outdated Product
TOP sellers
Mount type
mortise overhead
mortise overhead
Material
quartz composite /cristalite/
quartz composite
Shaperectangularrectangular
Working surface
Main bowls11
Bowl locationreversiblereversible
Additional bowl
Dish drying (wing)
Overflow
Tap hole
In box
 
automatic valve /depending on configuration/
General
Minimum cabinet width (base)600 mm600 mm
Working surface size780x500 mm770x510 mm
Mortise hole size (overhead)
760x480 mm /tie-in corner radius — 10 mm/
750x490 mm
Main bowl size (LxWxD)344x430x200 mm345x440x190 mm
Additional bowl size (LxWxD)164x285x145 mm165x294x120 mm
Country of originGermanyGermany
Added to E-Catalogjanuary 2017july 2014

Tap hole

Availability of space in the sink for the installation of the mixer. This hole can be cut in advance or, if necessary, knocked out during installation (the corresponding place on the model already exists and is made of a softer material).

In box

Tap. The presence of a tap in the kit will eliminate the search for a suitable style. On the one hand, a tap in a set simplifies the purchase of a sink, but on the other hand, it often introduces certain restrictions. Thus, taps come in different designs and capabilities, as a result of which a complete solution may not satisfy user needs. We also note that this paragraph indicates only those taps that are officially presented in the portfolio of a particular manufacturer of kitchen sinks. Such sets can be assembled within one line or without being tied to a specific series, but purely according to style.

Colander. The colander supplied with the sink is usually a mesh or hole bottom tray through which water can freely pass. Such a tray can be used in the same way as a common colander - for washing cereals and ready-made pasta, for washing and drying fruit, vegetables and greenery, etc.

Cutting board. Availability of cutting board in the product delivery kit. Such a board, when used, is usually attached directly to the sink; this may be especially relevant in cramped conditions where there is not much space on the kitchen table.

Automatic valve. Device that facilitates filling the sink with water and draining this water. It consists of the valve itself, which closes the drain opening, and an exit button or lever..., which is installed in a convenient place - for example, near the mixer. To drain water, it is enough to press a button or lever, opening the valve - it is much more convenient and comfortable than to lower your hand in the water and reach the drain hole.

Mesh on bowl. Mesh made of durable wire mounted over the bowl; can be made removable or foldable. This device is mainly used as a dishwasher; it can be especially useful if the kitchen does not have space for a separate dryer, or if you periodically have to deal with a large number of dishes for which a separate dryer is no longer enough.

Detergent dispenser. Availability of a dispenser for liquid detergents. This device looks like a container with a characteristic cap and a long spout: when you press the cap, a portion of the contents is delivered through this spout. The size of each portion is very small - by pressing the required number of times, you can quite accurately dose the amount of detergent. Dispensers of this design save space in the kitchen, since most of their body is located under the sink. This affects not only the ease of use of detergents, but also the aesthetic design of the kitchen interior.

Siphon. The presence of a siphon supply kit is a characteristic curved tube for connecting a sink drain to a sewer. The complete siphon is by definition optimally compatible with the «native» wash; it saves you the hassle of searching and selecting.