Shape
The general shape of the sink. Note that this parameter is not indicated by the shape of the bowl, but by the shape of the product as a whole (although often these moments coincide).
In addition to the classical forms (
rectangular,
square,
>>> roundnon-standard design, which can have very unusual outlines. These sinks should pay attention to those who try to decorate the kitchen in an unusual style.
Bowl location
Position of the washing bowl relative to the entire body of the product.
The standard, most traditional variants are placement
left,
right or
center (if viewed from the user’s point of view). Some models are available in both left and right layouts; they are marked in our catalogue as
«left/right». There are also t. n.
reversible sinks: they have a symmetrical shape and can be installed both left-handed and right-handed, at the user’s choice.
The choice for this parameter depends primarily on the layout of the kitchen and how it is necessary to fit the sink.
Dish drying (wing)
Flat surface, located next to the bowl sink. According to the name, can be used for
drying utensils (to make it leak water), but this is not limited: on the wing can be put, for example, freshly washed fruits and vegetables, or a thawed product. some sinks are available
without wing.
Overflow
Overflow has the form of an opening located at the top of the bowl; this opening must be connected to the drain by a hose. Such a device avoids the transfusion of water over the edge of the sink: when the bowl overflows, water will flow into the sewer through the overflow and will not rise above the edges.
Tap hole
Availability of space in the sink for the installation of the mixer. This hole can be cut in advance or, if necessary, knocked out during installation (the corresponding place on the model already exists and is made of a softer material).
Surface type
Type of washing surface made of stainless steel (cf. «Body material»).
— Glossy. Brilliant, mirror surface, distinguished by attractive appearance. On the other hand, on such a surface quickly appear contamination and mechanical damage (traces from dried water, fingerprints, scratches, etc.), so to preserve the appearance it needs to be cleaned regularly, or even polished.
— Matte. The matte surface does not look as bright as glossy - it is fainter, without pronounced reflections. On the other hand, such surfaces are less susceptible to contamination and damage: fingerprints, traces of dried water, scratches and scuffs on such surfaces are not as visible as on gloss.
— Textured. Surface having a relief pattern with a depth of a fraction of a millimeter. This material is most convenient and practical from the point of view of maintenance, it perfectly masks contamination and is well resistant to scratches. The main drawback of textured surfaces is higher cost than matt and glossy. In addition, contamination and bacteria can accumulate in grooves, so clean such sinks should be with special care.
Manufacturer's warranty
The warranty period declared by the manufacturer for this model is the period during which the manufacturer guarantees normal operation. The specific terms of the warranty may vary, however, as a rule, it covers factory defects and malfunctions caused by the fault of the manufacturer/seller and discovered during normal use, without violating the rules.
The longer the warranty period (mostly there are models with a guarantee for
5 years,
10 years, 15 years or even
with a lifetime warranty) - the more reliable the sink is, the higher its overall quality, all other things being equal, but the more expensive it will cost in comparison with analogues.
However, depending on the market (country in which it is sold), the warranty for the model may differ. For example, for the countries of the European Union, America and other advanced states, the guarantee can be increased.
