Jet settings
The number of settings provided in the hand shower for top shower (see "Complete set").
If you have
several settings, change the jet features and, accordingly, adjust the shower to the user’s wishes. For example, one watering can provide «rain» (ordinary drops of medium size), «waterfall» (stream in the form of water wall) and «stream» (continuous jet under high pressure); there are other modes, their specific set for each model is worth specifying separately. In any case, the more settings - the wider the choice of the user, but the more expensive and more difficult the watering can be on the background of models with
one mode upper shower.
Water flow
Water consumption during operation of the upper shower (cf. «Equipment»). Indicates the amount of water passing through the watering can with the tap fully open and the water pressure 3 bar (standard household water pressure).
The higher the bandwidth of the watering can be - the more powerful and intense the shower becomes. On the other hand, high water consumption is undesirable if you want to save water - for example, if you have meters installed or if water is supplied from a boiler with a small volume. In addition, it is worth remembering that the watering can have different settings and features of water supply. So, by selecting the lake with the right parameters, you can get a nice and effective top shower even when
low water flow. Actually, a low value in this case is considered to be up to 10 l /min; the average is 10 - 20 l/min, and in the most productive watering can be up to 30 l/min and even more.
Jet settings
The number of
jet settings provided in the complete manual or hygienic watering can (see "Complete set"). However, hygienic leukemias are usually made
single-mode - this is quite enough considering the application. But in conventional manual waterjets can be several, which allows you to change the characteristics of the jet at the request of the user - for example, instead of the usual thin jets, turn on a hard jet from a single large nozzle or a solid «soft» Flow from water filled with air bubbles. The specific set of settings can be different, it is worth to refine separately. However, in any case, the more options - the wider the choice of the user and the more complicated and more expensive the watering box itself.
Water consumption
The throughput capacity of a manual shower watering agent, in other words, the amount of water it gives out per minute when the faucets are fully open. Since the capacity is not only related to the design of the watering box, but also to the pressure in the water supply, it is customary to specify an average value - at a standard pressure of 3 bar.
The higher this parameter - the more intense the impact on the body can have a shower. At the same time, high water consumption can become a problem when there are water meters or when there are limited supplies - for example, if hot water is supplied by a boiler. Also note that
, low throughput can be compensated by certain jet settings.