United Kingdom
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Kitchen Sinks & Accessories   /   Kitchen Sinks

Comparison Franke Sirius SID 610-40 114.0497.988 450x530 vs Franke Orion OID 611-62 114.0381.873 620x500

Add to comparison
Franke Sirius SID 610-40 114.0497.988 450x530
Franke Orion OID 611-62 114.0381.873 620x500
Franke Sirius SID 610-40 114.0497.988 450x530Franke Orion OID 611-62 114.0381.873 620x500
from £194.79 
Outdated Product
Compare prices 2
TOP sellers
Mount type
mortise overhead
mortise overhead
Materialengineered stoneengineered stone
Shaperectangularrectangular
Working surface
Bowl locationreversible
Dish drying (wing)
Overflow
Tap hole
Tap hole diameter35 mm
General
Minimum cabinet width (base)450 mm450 mm
Working surface size450x530 mm620x500 mm
Mortise hole size (overhead)430x510 mm600x480 mm
Main bowl size (LxWxD)371x385x200 mm350x430x180 mm
Country of originSwitzerlandSwitzerland
Manufacturer's warranty10 years10 years
Color
Added to E-Catalogmarch 2017december 2016

Bowl location

Position of the washing bowl relative to the entire body of the product.

The standard, most traditional variants are placement left, right or center (if viewed from the user’s point of view). Some models are available in both left and right layouts; they are marked in our catalogue as «left/right». There are also t. n. reversible sinks: they have a symmetrical shape and can be installed both left-handed and right-handed, at the user’s choice.

The choice for this parameter depends primarily on the layout of the kitchen and how it is necessary to fit the sink.

Dish drying (wing)

Flat surface, located next to the bowl sink. According to the name, can be used for drying utensils (to make it leak water), but this is not limited: on the wing can be put, for example, freshly washed fruits and vegetables, or a thawed product. some sinks are available without wing.

Tap hole

Availability of space in the sink for the installation of the mixer. This hole can be cut in advance or, if necessary, knocked out during installation (the corresponding place on the model already exists and is made of a softer material).

Tap hole diameter

The diameter of hole required for tap mount. This size makes it possible to understand the size of the tap to be selected, the size of the additional parts to be fitted and whether the opening for an existing faucet has to be extended or narrowed.
Franke Sirius SID 610-40 114.0497.988 often compared
Franke Orion OID 611-62 114.0381.873 often compared