Comparison Kurzweil KA90 vs Kurzweil MPS20

The number of voices supported by the digital piano — more precisely, the maximum number of voices that the instrument can play at the same time.

This parameter should not be confused with the number of notes that can be played simultaneously on the keyboard. The fact is that in many timbres, several voices (tone generators) are used for each note at once — this is the only way to achieve a more or less reliable sound. Thus, the required number of voices can be many times higher than the number of notes — for example, the simplest chord of 3 notes may require 9 or even 12 voices. In addition, tone generators are used to play auto accompaniment parts and built-in songs (see below), and here the number of voices can already be measured in tens.

In light of all this, polyphony of less than 90 voices is typical mainly for relatively simple and inexpensive instruments that are not designed for complex tasks. The smallest number found in modern digital pianos is 32 voices. It is desirable for a more or less solid instrument to have at least 96 voices, and in top models this figure can reach 256.

The number of built-in sounds provided by the Digital Piano.

Despite the name, digital pianos are extremely rarely designed to imitate the sound of only a piano — the electronic hardware allows them to provide other timbres of sound. In addition, even the piano has its own varieties — for example, among the grand pianos there are 6 main classes, from large concert to miniature. So the built-in sounds can cover different kinds of pianos, as well as other instruments and sound effects.

The abundance and variety of timbres in digital pianos as a whole is not as great as in synthesizers, however, in this category there are very “charged” models, with a hundred timbres or more (in the most multifunctional, this number can exceed 900). However, it is worth specifically looking for a “multi-instrumental” model if you do not intend to be limited to the sound of the piano and would like to have more freedom of choice. It is worth remembering that a specific set of timbres can be different.

If the instrument is bought exclusively as a piano, then here, on the contrary, it is worth paying attention primarily to solutions with a small number of timbres. Such models are not only cheaper than "universals" — they can also sound better (due to the fact that there are few timbres and the manufacturer can carefully approach the sound quality of each built-in "instrument").

The number of Auto Accompaniment Styles (see above) originally stored in Digital Piano memory.

Different auto accompaniment styles differ from each other in the same way that different melodies differ from each other — in tempo, time signature, rhythmic pattern, set of instruments used, etc. Accordingly, the more styles initially available in the instrument, the wider the choice of the musician and the higher the probability of finding the option that best suits a particular situation. However even numerous styles does not guarantee that among them there will be a suitable one; in addition, we note that with the same number of styles, their specific set in different instruments can also be different. However, custom styles can be provided for this case (see below).

Summarizing, we can say this: if you plan to work intensively with auto accompaniment, in addition to the number of styles, it will not hurt to clarify their specific range.

The presence of a pitch controller(Pitch Bend) in the design of a digital piano.

Such a controller allows you to smoothly change the pitch of the note being played within a small range (usually up to a semitone up or down). In this case, control is carried out using a wheel, a lever, or another similar element that allows the musician to manually adjust the speed and limits of frequency change (including creating the effect of a note “trembling” in frequency). This function allows you to simulate the playing techniques of some instruments (for example, tightening the strings on a guitar) and gives an unusual sound to timbres that were not originally intended to have such effects.

Additional features and sound customization options provided by the instrument in addition to those listed above. In this paragraph, usually, various original proprietary technologies and solutions are indicated; the specific meaning of these functions is best specified in the documentation for the tool.

— Mini-jack (linear). Any line input is designed to receive an audio signal in analogue format. Such an audio signal can be played back by the instrument itself through the built-in speakers, external speakers or headphones, switched to external equipment (for example, an amplifier or audio receiver), or recorded (if you have a sequencer, see above). In digital pianos, the most popular is the first option — playback; typically, the line-in sound either serves as an accompaniment to the main part or provides additional effects. As for the mini-Jack standard, this is a miniature plug, also called "3.5 mm" and known to many as a standard audio jack on a smartphone, laptop or computer. However, this standard is also very popular in digital pianos — among external signal sources, mini-Jack plugs are generally more common than full-size Jacks.

— Jack (linear). Line input using a Jack type connector (aka "6.35 mm"). In terms of purpose, such an input does not differ from the mini-Jack type input described above. As for the connector, it is almost 2 times larger than the mini-Jack in diameter — however, given the dimensions of digital pianos, this cannot be called a serious drawback. At the same time, the Jack socket provides a better and more reliable connection, with less likelihood of interference. At the same time, for a number of reasons, this type of connector is used somewhat less frequently in digital pianos.

— MIDI in. An...input that allows the Digital Piano to receive MIDI signals from external equipment. MIDI is a standard signal format in electronic musical instruments; such a signal (MIDI-event) is created for each keystroke and contains information about the note number, strength, speed and duration of pressing; these signals can then be recorded and/or played back in a specific tone. The ability to receive MIDI events from external devices can be useful, for example, when playing two keyboard instruments at once (to play all the music on one of them, with better sound quality), or to use the digital piano as an adapter for another instrument that does not having the desired tones. In addition, technically, a MIDI signal can be switched to other devices (see "Outputs — MIDI thru").

— USB to device (type A). USB connector that allows you to connect various external devices to the digital piano. However, most often the range of such devices is limited to "flash drives" and other drives. However, even this functionality can provide very extensive additional features: you can play backing melodies from a flash drive, update user timbres and auto-accompaniment styles (see above) or even instrument firmware, and copy materials recorded by a sequencer to a flash drive (or even write music directly). ), etc. Specific features in different models may be different, this point should be clarified separately.

— Card reader. A device for reading memory cards — usually, the popular SD format. By purpose, this function is similar to working with a USB flash drive (see above), adjusted for the fact that memory cards will be convenient primarily when exchanging data with a laptop — almost all modern laptops are equipped with card readers, which cannot be said about desktop PCs.

The largest number of pedals that can be connected to the Digital Piano at the same time.

Pedals are an indispensable element of equipping a traditional piano, respectively, they are also necessary for electronic analogues of this instrument. However, in stationary devices (see "Body") the pedals are made built-in (see above), so this option is found only in portable models. Also note that if a stationary digital piano has 3 pedals as standard — like in a real piano — then portable digital pianos often have fewer. This is due to the fact that a full set of three pedals is rarely required in fact, and in many cases just one is enough (especially since many instruments allow you to reconfigure its functions).

In general, it makes sense to specifically buy an instrument with three connected pedals mainly for demanding professional musicians who value the full functionality of the pedals (or the ability to tie an extended set of functions to the foot control). In other cases, this parameter is not particularly important.

— USB to host (type B). Connector for connecting a digital piano to a computer using the USB standard; in this case, the instrument plays the role of a peripheral device. The possibilities of such a connection can be different: recording live music, updating firmware, voices and auto accompaniment styles, using the digital piano as an external MIDI keyboard, fine-tuning the instrument and troubleshooting, etc.; specific functionality varies from model to model.

— MIDI out. An output that allows you to broadcast MIDI signals (MIDI events) from the Digital Piano to external devices. A MIDI signal is, in fact, a "preparation" of sound: a signal generated when a key is pressed and containing information about the note number, duration, and force of pressing. Based on this signal, the electronics of the instrument (or other device) generates the sound of a certain timbre. The MIDI output can be useful for connecting a digital piano to, for example, an external sequencer for recording, or to a synthesizer for playback in a tone that is not in the piano itself.

— MIDI thru. Output used for switching MIDI signals. The description of such signals is given above, but here we note that the MIDI thru output duplicates the signals received at the MIDI input of the digital piano. This function can be useful in some specific cases — for example, connecting several electr...onic instruments together.

The power of the native acoustics installed in the Digital Piano.

This indicator directly affects the maximum volume that the instrument is able to produce "on its own", without connecting external speakers. At the same time, it is worth noting that many manufacturers go to the trick and indicate in the characteristics not the rated power (rms power when operating at full volume), but the peak power, which is the highest power that the acoustics can deliver at short “ups” of volume. Peak power values can be quite impressive — in the tens and hundreds of watts — but these figures have a very indirect relation to the actual capabilities of the speakers. Therefore, before choosing, it is worth clarifying what kind of power is mentioned in the characteristics. To do this, it is not necessary to look for detailed data on the instrument, it is enough to compare the power of the speakers with the power consumption (see below): if the claimed power of the acoustics is greater than the power consumption of the entire instrument, then the manufacturer indicated exactly the peak value.