Rigidity
The hardness of the keys on a keyboard is the amount of resistance they provide when pressed.
—
Unweighted. Very low rigidity: the keys literally "fail" under the fingers. Found mostly in entry-level keyboards; this is due to the fact that unweighted mechanics are inexpensive, but the low pressure resistance makes it difficult to select the optimal pressure and control the dynamics of the sound.
— Semi-
weighted. Keyboards with medium resistance — not as high as on weighted keys, but noticeably higher than on unweighted ones. This option is considered optimal for active keyboards (see "Mechanics"): at a low cost, it gives quite good responsiveness and, with a minimum skill, allows you to accurately control the pressing force.
—
Weighted. Keyboards with high resistance, which is comparable to the resistance of classical piano keys. Note that high effort in this case is an advantage: it allows you to bring the response of the keyboard as close as possible to the response of a classical piano and makes it easier to control the pressure and dynamics of the sound. Actually, by definition, all hammer-action models are made weighted (see "Mechanics"), but among active keyboards this option is rare — due to complexity and high cost.
Aftertouch
The presence of the aftertouch function in the keyboard (aftertouch). The essence of this function is to track the pressure force on the key after it is pressed. In fact, this means that in models with aftertouch, you can control the sound not only due to the force and speed of pressing the key, but also due to the change in pressure on it after pressing; this gives additional features and allows you to use various specific tricks of the game. The specific ways of changing the sound “tied” to aftertouch can be different, depending on the synthesis settings set: for example, when recording a guitar part, you can tie a small change in tone to this function and imitate string bending, when recording a saxophone, change the volume of notes, and etc.
Relatively inexpensive models use a common sensor to monitor aftertouch, which monitors the average force of pressure on all keys pressed; in more advanced ones, separate sensors are installed for each key.
Transposition
The presence of the transposition function in the keyboard — switching the sound to a different key. When transposing, the pitch of all keys is simultaneously raised or lowered by a certain number of semitones. This function is useful in all cases when a melody learned in one key needs to be played in a different key — for example, if the original melody is too high or too low for the vocalist, if the external accompaniment differs in key, if you need to switch between keys during the song, and etc. In such situations, by transposing the sound, you can play a melody in a new key using the same familiar keys without relearning it.
Keyboard split
The presence in the device of the function of splitting the keyboard.
This function, as the name suggests, allows you to divide the keyboard into two parts, each of which will have a different timbre. Thus, on one device, you can play the part of two instruments at once (for example, add the sound of a string orchestra to the violin) or accompany the part of the instrument with various effects (siren, klaxon, thunder, etc.). Some models allow you to select the position of the border between the keyboard zones.
Transport control
The presence in the keyboard of
the transport control function.
In this case, we are usually talking about support for the MIDI Machine Control standard, designed to control external recording and playback equipment. Such support actually turns the keyboard into an external remote control, allowing you to give commands from it to "Play", "Stop", "Pause", "Rewind" (forward and backward) and "Record". To do this, the design provides a separate panel with a set of appropriate buttons.
Faders
The number of
faders provided in the design of the keyboard.
A fader is a slider control. The simplest kind of such controls is the volume setting; if there is one fader in the design, most likely it is responsible for the volume. If there are more controls, other functions can be tied to them, respectively — in particular, changing the settings in the recording programme on the computer to which the keyboard is connected.
Regulators (encoders)
The number
of encoder controlsprovided in the design of the keyboard.
Such a knob looks like a rotary knob, with which you can control various functions of the device to which the keyboard is connected — for example, turn the virtual knobs in the programme for recording and sound processing. At the same time, we note that a full-fledged encoder is capable of rotating 360 ° and turning to any angle in any direction, however, keyboards can also contain knobs with a limited rotation sector — they can also be called encoders. None of these options has a clear advantage: in some cases, an unlimited turning sector is more convenient, in others, a limited one.
MIDI out
A specialized output for transmitting MIDI signals to an external device — a sequencer, a computer sound card (if there is a MIDI In input), etc.
MIDI signals are a kind of "digital notation": they tell which key was pressed, with what force and for how long, and also carry information about various additional parameters: timbre, tempo, key, etc. To convert such signals a "ready" sound requires an external sequencer (software or hardware).
Note that despite its specialized purpose, the
MIDI Out output is not mandatory for modern MIDI keyboards: MIDI signals can also be transmitted via other interfaces, such as USB or Bluetooth (see the relevant paragraphs). So it makes sense to specifically look for a keyboard with such a connector if you plan to connect it to equipment with a MIDI In input.
Display
The type
of display that the keyboard is equipped with.
Most modern MIDI keyboards have relatively simple monochrome (single colour) displays. Such screens are inexpensive, and their capabilities are sufficient for most cases. However, there are also models with colour screens — usually, such equipment is a sign of an advanced keyboard with an abundance of additional functions; for simpler devices, a colour display is overkill.
