Dark mode
United Kingdom
Catalog   /   Home & Renovation   /   Furniture   /   Inflatable Furniture

Comparison Intex 64132 vs Bestway 67469

Add to comparison
Intex 64132
Bestway 67469
Intex 64132Bestway 67469
Compare prices 2
from $49.00
Outdated Product
TOP sellers
Product typebedbed
Number of seats11
Specs
Maximum load150 kg227 kg
Stiffening riblongitudinallongitudinal
Pumpelectric built-in pumpelectric built-in pump
Headrest
Flocked coating (velor)
Size (unfolded)198x99x42 cm191x97x43 cm
Weight5.7 kg9 kg
Color
Added to E-Catalogapril 2017november 2016

Maximum load

The maximum load allowed for a piece of furniture; in other words, the maximum allowable total weight of people using the product.

It is definitely not recommended to exceed this parameter — even if the shell does not burst immediately, it will be subjected to abnormal loads, and an “accident” can occur at any time. And ideally, you should have a weight margin of at least a couple of tens of kilograms — this will give an additional guarantee in case of unforeseen situations. With regard to specific values, a permissible load of up to 100 kg is found exclusively in single furniture; values of 100 – 200 kg are also typical mainly for products for 1 person, although double solutions are already found here (the actual minimum for them is about 175 kg); and the most durable and “hardy” models, which can withstand more than 200 kg, are already mainly double.

Headrest

The presence of a headrest in the product is a device for supporting the head.

This feature is found mainly among beds (see "Type"). In such furniture, the headrest is a small protrusion from the side of the head of a lying person (people). This ledge performs several functions at once: it increases the height of the pillow, reduces the likelihood of it falling over the edge of the bed, and in extreme cases it can even replace the pillow. At the same time, note that in some cases the headrest may be redundant — for example, if the existing pillows are already of considerable thickness. So most air beds do not have such equipment.

Size (unfolded)

The overall dimensions of the product in the working position — fully inflated, and for folding models (see "Type") — also unfolded.

In general, this is a fairly obvious parameter; we only note that the size of the space available for sitting or lying down may be somewhat less than the overall length or width of the product — due to the presence of a backrest and/or armrests. These elements usually account for about 20 – 25 cm of space.

Weight

The total weight of the product.

The ease of transportation depends primarily on the weight. However in the case of inflatable furniture, this point is not critical: most of these products are still designed for constant use in one place. However, sometimes a piece of furniture is also bought with the expectation of being able to quickly move from place to place — for example, from home to the country house and back. In such cases, it is worth considering that light weight makes it easier to carry, but for the same performance, lighter products usually have either less reliability (due to the thin shell) or more cost than heavier ones.
Intex 64132 often compared