Volume
The working volume of the bath is usually indicated by the amount of water that can be poured to the level of overflow.
In general, the larger the volume - the, as a rule, the more comfortable the bath, the higher the likelihood that it will be able to lie down or even dive into the water almost entirely, up to the neck. However, it should be borne in mind that models of the same volume can differ markedly in size and shape (both external and internal). This means that large capacity does not yet guarantee convenience for a particular user. In addition, filling the volume bath will take more time and require more water, which can be critical if there are meters or limited water supply (for example, hot water from the storage boiler).
Central drain / overflow
Models of baths in which the location of the connection of communications (drain, overflow) is in the central part, i.e. at the long side, not at the short side.
Tubs with central drain will be appropriate in cases of complications of access to communications from the end sides and can be said to be more elegant and aesthetic when fully connected.
Seat
The design of the bath has a special bend on which you can sit, which allows you to take a bath not lying, but sitting.
The seat may resemble a shelf, but has a larger indentation and allows you to sit comfortably even with a lean back.
Shelf
Built-in
shelf in the tub structure, located above the overflow level. It can be used to put soap and bathing accessories.
Country of origin
Country of origin, officially declared in the characteristics of the bath. Note that this parameter may not correspond to the actual place of production - the “homeland” of the company selling bathtubs is often indicated as the manufacturer, and the production may be located in another country. This is done for advertising purposes: for example, the products of European and American companies are considered by many to be more reliable and of higher quality than those of Asian firms. However, the actual quality of products today depends not so much on geography, but on the integrity of a particular company; therefore, when choosing, it makes sense to focus not on the country of origin, but first of all on the reputation of the brand. In this niche, in addition to the domestic manufacturer, the most popular manufacturers are
Austria,
Germany,
Spain,
Italy,
China,
Poland,
Portugal,
Slovenia,
Turkey,
France,
the Czech Republic,
Switzerland.
Dimensions (LxWxH)
Size of the bath in length, width and height. When choosing, it should be borne in mind that the length and width are specified on the outer dimensions - this allows you to estimate the place required for the installation of the bath, but its internal dimensions are inevitably obtained less. But as a height it is customary to indicate the depth - the distance from the top edge to the bottom. Here we note that the high altitude allows you to dive deeper into the water, but may cause some people (for example, elderly or suffering from leg diseases) problems when entering the bath.
Bath depth
The depth of the bowl, measured from the sides of the bath to the bottom of the inner space. This can vary widely, ranging from about 30 to 65 cm in increments of 5 cm. Usually
is located in the area of 40-45 cm. For bathing in deeper products may need a special podium, step or highchair, which will help to cross the high side of the bath.
