Comparison Zoom H1n vs Olympus LS-P1

The capacity of the voice recorder's own storage. The larger the built-in memory, the more material can be recorded on the recorder without the need to free up memory or use additional cards. This parameter is also important if you want to use the device also as a portable flash drive (many modern models allow this).

The built-in microphone type determines the mode (number of channels) in which the voice recorder records sound.

— Mono. The simplest option: one microphone that records sound in mono format, i.e. without separation into left and right channels. It is impossible to provide a "surround" sound with such a recording, however, in the case of voice recorders, this is not decisive, because. usually in such a recording it is not the volume of the sound that is important, but the intelligibility of speech — and it is fully provided by a monophonic microphone.

— Stereo. In this case, a pair of microphones is usually used, spaced apart on the sides of the case; the sound is recorded in stereo, and the volume of the sound is achieved due to the difference in the sound reaching the left and right microphones. Considered somewhat more advanced than mono, although it does not provide better speech intelligibility by itself.

The maximum continuous recording time for the voice recorder. It depends primarily on the amount of memory (see "Built-in memory", "Memory card slot"), it is also directly related to the recording quality: the higher the quality, the more space the material occupies and the shorter the maximum recording time. In this regard, manufacturers usually indicate in the specifications the maximum possible recording time, that is, the recording time with minimum quality; with higher quality and time will be less.

The range of sound frequencies that the recorder is capable of perceiving and recording. A person is able to hear sound on average from 16 Hz to 20 kHz, but the range of the actual human voice is much narrower — approximately 100-3500 Hz. Therefore, if you plan to use a voice recorder to record speech, these frequencies will be enough. If the purpose of the recorder is not limited to this, you should pay attention to models with a wider range — and in this case, the wider it is, the fuller and richer the recording will be.

— Change microphone sensitivity. The ability to change the sensitivity of the microphone allows you to optimally adjust it to the surrounding conditions. So, with a low level of extraneous noise (for example, at a lecture or a press conference), sensitivity can be set to the maximum in order to guarantee that everything that is needed is recorded, and in a noisy environment (for example, an interview in a cafe), on the contrary, it can be reduced in order to reduce outsiders noise to a minimum.

— Change the quality of the recording. Possibility to change the recording quality (usually the bitrate of recorded materials). The volume of the file is directly related to the quality: the higher the quality, the more space the recording takes up. Thus, this function allows you to achieve the optimal balance between sound and memory occupied: for example, for loud intelligible speech without extraneous noise, you can use low quality, in a noisy environment, on the contrary, increase it in order to achieve maximum intelligibility; if there is not much memory left, and nothing can be deleted, lower the quality of the recording, etc.

— Voice activated recording. When using this function, the recorder only records when its microphone captures a significant level of sound — in principle, this can be any source, but since human speech is most often recorded, the name of t...his function refers specifically to the voice. With such a recording, the recorder does not record long pauses, which saves both the occupied memory and time (and sometimes nerves) when listening to the recording. The disadvantage of this feature is that activation takes some time and the first sounds may not be recorded on the recording.

— Setting record labels. Ability to assign a unique label to each file. This can be either a number or a time and date, or both. Tags organize entries and make them easier to access, making it much easier to find the right file.

— Recording timer. The timer allows you to set the start time of the recording; when it occurs, the recorder will turn on automatically. Thus, you will be able to record the material you need (for example, a speech or a lecture) from the very beginning, even if you will not be there by the time you start.

— Ring record. The name of this function comes from its resemblance to recording on a magnetic tape closed in a ring. In this mode, the recorder can record regardless of the amount of free memory: new materials are simply recorded instead of the oldest ones. This eliminates the need to clear memory manually and can come in handy if your records quickly become out of date — for example, if you have to take surveys by phone and process the results on the same day. At the same time, this function requires caution, as increases the likelihood of accidentally erasing necessary, but old records.

— Li -Ion battery (lithium-ion). The most common type of batteries for portable electronics today. Such batteries have a good capacity, are not subject to the memory effect (decrease in capacity when charging an under-discharged battery) and are easy to use, because. equipped with their own control circuits. From the point of view of an ordinary consumer, they have practically no disadvantages, as they are associated with specialized maintenance and long-term storage. The fundamental disadvantage of any built-in battery is the impossibility of a quick replacement; the only option is to charge the battery, which sometimes takes a long time.

— Li -Pol battery (lithium polymer). In fact, they are a modified version of lithium-ion batteries (see above). They have the same advantages, in addition, they are more compact (from 1 mm in thickness), which allows them to be used in miniature models. At the same time, lithium-polymer batteries do not work well in the cold.

— AA battery(or several batteries). Powered by a conventional AA battery (batteries), commonly known as "finger-type". The advantage of such a power supply is the ability to quickly replace a “dead” battery: if there is a spare, this operation is performed in a few seconds, and buying extra batteries in reserve is usually not a problem — they are sold everywhere. The main disadvantage is the need for...financial costs for the purchase of batteries, while capacious ones are expensive, and cheap ones quickly sit down. On the other hand, there are rechargeable batteries in the form of AA batteries; if the recorder is used frequently and a lot, the purchase of such batteries may well pay off.

— AAA battery (or several batteries). Powered by a battery or AAA batteries, the household name is “little finger”. They are smaller than the "finger" AA (see above), due to which they are better suited for portable equipment, including voice recorders, otherwise they are completely similar.

— Coin-cell battery. Powered by a replaceable compact battery shaped like a pill or a button. Such batteries are the smallest option to date, which makes it easier to create compact devices for them. In general, they are similar to AA and AAA (see above), but they have a number of differences, except for the actual form. In particular, there is no single standard for "coin" batteries — there are a great many of them, in different sizes and voltages, which can make it difficult to find a replacement for a "dead" battery. In addition, they are much less common.