Comparison Fancy Marble Lily 600/2 600 mm vs Fancy Marble Lily 600 600 mm

— Suspended. Washbasins designed to be fixed to the wall. These models take up a minimum of space, but are quite difficult to install, because they require the installation on the wall of the corresponding attachments. It is very difficult to install. In addition, in most hanging washbasins, drain pipes (and sometimes eyeliner) often remain visible, which is not very aesthetic. You have to either put up with this, or go to certain devices (for example, independently build a bedside table to cover the pipes). At the same time, there are varieties devoid of this defect. These models are equipped either with a half pedestal (cf. «Complete»), or a full pedestal for installation on the floor. However, in the latter case still require a wall mount for stability, and therefore they are not attributed to the following floor.

— Vessel on stand. Washbasins designed for installation on a specially adapted pedestal. Somewhat easier to install than hanging ones, as they do not require brackets or other attachments - it is enough to put the sink on the cabinet and bring communication. In addition, drain and other pipes during installation are hidden in the cabinet, which provides a neat appearance, and the cabinet itself can play the role of locker. On the other hand, the need to search and select the cabinets creates additional hassle, such washbasins take more space than the hangin...g, and features of the design somewhat limit the variety of forms.

— Vessel on tabletop. Type of overhead washbasins designed for installation on the countertop. In many ways similar to the overhead models designed for cabinets (see above), but much easier to install: in this case, no specialized pedestal is required, any horizontal surface with a hole under the drain is suitable. This makes it much easier to choose a stand for this type of washstand, and they can have almost any shape.

— Mortise in tabletop. Washbasins designed for integration into a flat surface. They look quite elegant and take up a little space, in addition leave the user with the option: the sink can be built into the top surface of a special cabinet, and in the simplest shelf. In the first case, you can hide inside the communication, and the second option provides maximum free space. At the same time, this type requires both a suitable surface (cabinet or shelf) and a hole in it in the shape of a shell - with a certain skill it is possible to make it yourself, but it is better to contact a specialist.

— Mortise under tabletop. A variety of mortise washbasins (see above), in which the upper edge of the sink during installation is located not above, but below the countertop. This moment does not play a special role (except that it is somewhat easier to clean up water spilled on the countertop — it is enough to “drive” it with a rag to the edge of the sink), in terms of its main features, this variety is completely similar to the previous one.

— On washing machine. Washbasins designed to be fitted with a washing machine under the sink. This option is convenient primarily because it allows you to optimally use the space in the room. At the same time, it should be borne in mind that modern «washers» can differ markedly in size, and before buying it will not hurt to clarify the compatibility of the washbasin with a particular machine; and if the machine has a vertical load, this option is not applicable at all. The nuances of the installation in different models of such washbasins may differ, but most often the sink is attached to the wall, and the washing machine is supported only partially (although the role of the main support is still played by the «washer»).

— Floor. In full accordance with the name of such washbasins are integral structures of bowls and cabinets designed for installation on the floor. Their main difference from the suspended models with a bedside table (see above) is that they are able to stand steadily on a flat floor without any additional attachments. Due to this, the floor model can be, metaphorically speaking, installed even in the middle of the bath (the main thing - to deal with the supply of pipes). Accordingly, this type is the easiest to install. However, the floor models are quite expensive.

There are washbasins designed for several installation options - for example, models with the possibility of applying both to the stand and to the table top.

The overflow is a special opening located at the top of the shell. It prevents the transfusion of water over the edge: reaching the overflow, water through a special hose enters the drain pipe, which saves the bathroom from the «flood». Such a hose may be part of the wash basin, but most often it has to be purchased separately.

Note that overflow is designed for situations when the drain itself is closed (for example, by plugging); but if the drain is clogged lower (for example, in a siphon), this function will be useless - the water will still have nowhere to go from the filling shell. And therefore, the presence of overflow in the design of the wash basin does not eliminate the need to monitor the state of the sewer.

The diameter of the hole required for the installation of the mixer. This size makes it possible to understand the size of the mixer to be selected, the size of the additional parts to be fitted and whether the opening for an existing faucet has to be extended or narrowed.

— Pedestal. Design element designed to install the washbasin on the floor; simply put - a stand. It is found in floor washbasins as well as in some hanging ones (cf. «Type of installation»). In addition to maintaining the sink, the pedestal plays an aesthetic role: it hides eyeliner and drain pipe inside itself, providing a neat appearance.

— Semi-pedestal. An element of the construction of the washbasin, designed to cover the drain pipe (and sometimes - and eyeliner). In this sense, it is similar to the pedestal (see above). However, unlike it, does not play the role of a stand, because it is not attached to the floor, but to the wall. It is found in suspended models (cf. «Mounting type»). The advantage of the half pedestal is the minimum occupied space - it does not reach the floor. At the same time, the installation of such washbasins is associated with certain difficulties, because it requires the appropriate location of communications in the house: in particular, the outlets of sewer pipes should be located in the wall at half pedestal level.

— Bottom valve. The presence of an automatic valve in the design of the wash basin. In fact, such a valve is an automated plug for the drain hole: with a special switch, you can close and open the drain at will. This is much more convenient than putting and removing the plug manually, in addition, it elimin...ates the need to buy it separately (but the plug still needs to pick up the size of the drain hole, the valve by definition does not require it).

— Siphon. Siphon is a curved drain pipe that is required to connect the sink to the sewer. The presence of such a pipe in the supply of the washbasin will save you the need to pick up and buy it separately.

— Towel holder. The towel carrier is a towel rack fixed directly to the washbasin, usually in the form of a straight or curved bar. This feature allows you to always keep the towel at hand, and also provides an additional place for it - it is useful in large families where many towels can be used at the same time.