United Kingdom
Catalog   /   Home & Renovation   /   Bathroom & Taps   /   Bathroom & Shower   /   Taps

Comparison Hansgrohe MySport M 13861000 vs Hansgrohe MySport S 13860000

Add to comparison
Hansgrohe MySport M 13861000
Hansgrohe MySport S 13860000
Hansgrohe MySport M 13861000Hansgrohe MySport S 13860000
Compare prices 1Compare prices 2
TOP sellers
Suitable for
for kitchen
for kitchen
Tap typesingle leversingle lever
Spout
Shapebent at an anglebent at an angle
Swivel
 /rotation angle 360°/
 /rotation angle 360°/
Jet depth220 mm202 mm
Jet height155 mm116 mm
Specs
Stop valveceramicceramic
Installation
Installationdesktop (horizontal)desktop (horizontal)
Mounting holes1 шт1 шт
Mounting hole diameter34 mm34 mm
Inlet communication
hoses
hoses
General
Materialbrassbrass
Finish
chrome
stainless steel (brushed)
chrome
stainless steel (brushed)
Tap height232 mm155 mm
Country of brand originGermany
Color
Added to E-Catalogmay 2019may 2018

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Jet height

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).

Country of brand origin

Country of origin of the brand under which the tap is marketed. Usually, it is indicated by the "homeland" of the manufacturing company or by the location of its headquarters. The brands under which modern mixers are produced come mainly from the following countries (in alphabetical order): Austria, Belgium, Germany, India, Spain, Italy, China, Poland, Russia, Turkey, Czech Republic, Finland, France, Sweden.

There are many stereotypes associated with the “nationality” of brands and products, but most of them have no basis nowadays. First, the actual place of production is often different from the brand's country of origin. Secondly, the quality of the goods depends not so much on geography, but on the policy of a particular company and how carefully this very quality is controlled in it. Therefore, you should pay attention to the country of origin of the brand only if you fundamentally want or (do not want) to support a manufacturer from a certain state. Quality is best judged by the reputation of a particular...brand and the overall price category of the tap.