Comparison Candy CDCP 8/E-07 white vs Siemens SK 26E821 stainless steel

The maximum number of place settings loaded into the dishwasher at once. A place setting is considered a set of dishes for one person: four plates (for the first course, for the second course, salad, bread), a saucer for dessert, a cup, a spoon and a fork.

The large capacity allows you to wash numerous dishes in the machine at once without starting the washing programme again. At the same time, a large capacity may be undesirable. Firstly, a capacious working chamber affects the dimensions of the entire machine. Secondly, such units consume more water. Thirdly, if there are not many dirty dishes, you either have to wait until it accumulates, or start an underloaded machine, wasting water and detergents. Therefore, when choosing according to this indicator, you need to consider real needs and not chase the maximum capacity.

— Custom programme. Ability to create and save a custom programme by setting the parameters to your liking. This function is convenient because instead of setting the washing settings manually each time, it is enough to save them once in the device’s memory and then select a user programme from the list.

— Half load. A special programme for those cases when the dishwasher is loaded with only half its regular capacity. Running a full-fledged wash in such cases would be too wasteful. In the half load mode, the dishwasher reduces the consumption of water, detergents and electricity and focuses on a reduced amount of dishes. Such a programme is relevant mainly for big models (from 8 place settings).

— Pre-rinse. it is a programme where the dishes are rinsed with cold water and, due to the high humidity in the working chamber, do not dry out for a long time, and food remains do not dry out on the plates. This programme is useful in cases where unwashed dishes need to be kept inside for a long time. For example, if you need to leave the house for a couple of days, and there is no time to wash the dishes, or if there are enough dishes for the main programme to work in several meals. In addition, it can be useful for washing heavily soiled dishes — rinsing allows you to soften and then remove dried-on dirt without using intense washing programmes (which are not available on all models).

— Quick wash.... The programme is designed mainly for lightly soiled dishes that do not require intense washing.

— Automatic. The peculiarity of this programme is that the machine independently monitors the process of work: special sensors evaluate the composition of the water flowing from the dishes during rinsing, and when no impurities are found in it, the work ends. The washing does not last a strictly defined time but until the dishes are clean completely. It ensures optimal resource consumption. In this case, the washing mode itself can be different: in some models, the automatic programme works only in the standard mode, in others, you can select the water temperature.

— Eco. A programme that reduces the consumption of water, detergents and electricity compared to a normal wash cycle. Usually, it is intended for dishes without heavy soiling and dried food residues, although individual models may have their features of the economy mode.

— Delicate (for glass). Special programme for washing fragile dishes, especially those made of thin glass. Washing is carried out at low temperatures and with minimal mechanical stress, which allows you to keep delicate dishes intact.

— Hygienic. A programme designed for the most effective destruction of pathogenic bacteria and viruses. Usually, it provides elevated water temperatures (about 68 ... 70 °C), which can provide a bactericidal effect. The presence of this mode is very desirable if the machine is used to wash children's dishes; it can also come in handy if someone in the family gets sick.

— Intensive. Special programme for washing heavily soiled dishes, such as pans with dried-on food residues. Usually, it provides increased pressure and elevated water temperature.

— Quiet). A programme for working at night and in other situations where excessive noise is undesirable. The level of noise produced by the dishwasher in this mode is reduced due to a decrease in water temperature, a decrease in its pressure and several other tricks (their specific set depends on the model). And the necessary washing efficiency is usually provided due to the increased operating time; when you turn on the machine at night, the duration of washing is not a serious drawback.

— Steam. Hot steam treatment of dishes can be used for two purposes. The first option is a preliminary procedure similar to pre-rinse and designed to soften dried food residues; at the same time, due to the high temperature, the steam handles the task faster and more efficiently. In addition, some machines provide the possibility of sterilizing jars and other utensils for home canning in this way. However, the energy consumption during steam processing is quite high. In addition to the above, other types of programmes may be indicated in the characteristics of dishwashers, in particular:

— Normal. Standard programme for washing lightly soiled dishes with a full load at temperatures around 65 °C. Available in almost all modern dishwashers, but sometimes manufacturers specify its availability separately.

— Plastic utensils. Programme for washing reusable plastic dishes. Usually, it provides lower temperatures and lower intensity than the standard programme — plastic is sensitive to scratches and does not tolerate high heat. We note that not all plastic dishes, even reusable ones, are compatible with a dishwasher — this point should be clarified separately, and washing disposable dishes in principle does not make sense.

— Mixed. This category includes all programmes that combine several washing modes at once. For example, the normal mode in the compartment for cups and glasses, plus the intensive one in the lower part, where you can put a pot or frying pan. Options for such combinations may be different, depending on the model.

— Self-clean. A special programme removes all kinds of impurities from the walls of the washing chamber. In the self-clean mode, the machine heats the water as much as possible using detergents and drains it often, which allows you to get rid of moderate soiling.

Signal indicates that the machine has finished working. Many dishwashers are quiet, and without a special signal, it can be difficult to determine if the programme has ended.

Possibility of connection of the dishwasher to a source of hot water. With this connection, the water enters the device already heated (unlike the usual procedure, when the machine heats the water to the desired temperature) — thus saving time and energy. However, the hot water supply is quite demanding on the quality of water: in most cases, it must have a temperature of 60-65 °C and flow without pressure drops.
Note that hot water supply is an option, not the only solution; machines with the possibility of such a connection can usually work according to the standard scheme, from a source of cold water.

The door auto-closer is responsible for “pulling” the door when closing, and in some models also when opening. The idea is that the user does not need to close/open the door completely: pull it to the right place, and then the door will be "picked up" by the auto-closer and smoothly brought to a fully open or closed state. Such a system performs two functions. Firstly, it reduces the risk of leaving the dishwasher not closed. Secondly, such a device provides a very smooth opening and closing without shock. Thus it has a positive impact on the life span of the entire device.

— Rotary knob. Usually, it is not the only control: the rotary knob is used to select the operating mode, and the remaining functions of the dishwasher (start-stop programmes, timers, etc.) are controlled by buttons. However, panels with rotary knobs still have their specifics, so they are distinguished as a separate type of control. Technically, this option can be used in dishwashers of all price categories, but it is found mainly in relatively inexpensive models.

— Push-button controls. This option allows you to work even with very extensive functionality, while buttons are cheaper than touch controls(see below). Therefore, push-button controls can be found in all classes of dishwashers, from low-cost to top-end ones. Its main disadvantage is the presence of slots between the buttons and the panel, where dirt can clog; cleaning out this dirt can be quite difficult.

— Touch controls. These controls are easier to operate than buttons (see above) — instead of pressing, a light touch is enough. Touch controls are easy to clean. Do not forget that such control gives the dishwasher a modern and advanced appearance. On the other hand, touch controls are more expensive than other types of control. Therefore, they are used mainly in high-end models.

The machine has its own display. Typically, this is the simplest LCD screen capable of displaying multiple characters. However, even such a screen provides additional convenience and makes the operation more intuitive: various notifications can be displayed on it, in particular, about the current operating mode, the remaining time, set timers, the remaining detergent, etc. More advanced dishwashers can be equipped with a TFT display with advanced features. But this does not affect the washing process.

It is a safety system designed for homes where there are small children. Various locks can be provided in the design, To prevent a curious child from injuring himself and ruining the machine — usually for the door, sometimes also for the control panel. Child lock is disabled in a way that is easily accessible to an adult, but inaccessible to a child.

The presence of an inverter motor in the design of the dishwasher.

Inverter motors differ from conventional ones in the absence of a commutator with brushes (which is why they are also called brushless or brushless). Such units have higher efficiency (and, accordingly, less energy consumption), low noise levels and improved safety — the absence of brushes means a minimum likelihood of sparks. On the other hand, other things being equal, models with inverter motors are noticeably more expensive.