Comparison Zanussi Marco Polo III ZACM-07MP-III/N1 21 m² vs Electrolux EACM-10EZ 28 m²

The area of the room recommended for using the air conditioner in the main mode is for cooling.

Most often, this parameter is indicated by a simplified formula: about 100 W of effective air conditioner power is required per 1 m2 of room area. Thus, for example, for a model with a cooling capacity of 2200 W, the recommended area will be 2200/100=22 m2. However, these results are relevant only for standard conditions in residential and office premises: ceiling height of about 2.5-3 m, no strong heat gain, etc. For more specific situations, there are more detailed calculation formulas, that can be found in special sources. Anyway, choosing an air conditioner according to the recommended area, it's ok to take a margin of at least 15-20%: this will give an additional guarantee that the device will be effective.

The recommended area up to 15 m2 for a modern air conditioner is considered very low; such units are designed to serve single rooms of a small area. For an average living room like a bedroom or living room, a 20 m2 or even 25 m2 model is better suited. Models of 30 m2 and above are already intended for at least studio apartments, and more often for office and industrial premises. And in the most powerful modern units, the recommended area can be 150 – 175 m2 or even more.

Note that the same general formula is used for the heating mode — “100 W per 1 m2”. At the same time, the effective power of most air conditioners in this mode is noticeably higher than in the cooling mode. So this item can also be used to select a unit with a heating function: an air conditioner capable of cooling a room of a certain area is almost guaranteed to be able to heat it (taking into account the relevant restrictions on the use — see "Operating modes").

Power consumption of the air conditioner in cooling and heating mode; for models without a heating mode, only one number is given. This parameter should not be confused with the effective capacity of the air conditioner. Effective capacity is the amount of heat that the unit can "pump" into the environment or the room. This item also indicates the amount of electricity consumed by the device from the network.

In all air conditioners, the power consumption is several times lower than the effective capacity. It is due to the peculiarities of the operation of such units. At the same time, devices with the same efficiency may differ in power consumption. In such cases, the more economical models usually cost more, but with continued use, the difference can quickly pay off with less electricity consumption.

Also, two points related to electrical engineering depend on this nuance. Firstly, power consumption affects power requirements: models up to 3 – 3.5 kW can be connected to a regular outlet, while higher power consumption requires a three-phase connection (see below). Secondly, the power consumption is needed to calculate the load on the mains and the necessary parameters of additional equipment: stabilizers, emergency generators, uninterruptible power supplies, etc.

The heat output of the air conditioner when operating in cooling mode, in other words, the amount of heat energy that the unit can transfer from the room to the external environment when operating in this mode.

In general, cooling capacityup to 2 kW for modern air conditioners is considered very modest, 2–3 kW is low, 3–4 kW is medium, 4–6 kW is above average, and in the heaviest and most productive models this figure can be 6–8 kW and even more. Also, the conventional unit BTU can be used to denote capacity; in our catalogue, 1 BTU corresponds approximately to 0.293 W, however, for the convenience of choice, some deviations are allowed: for example, the 7000 BTU category includes units with power from 1.8 to 2.3 kW. Also on sale you can find air conditioners for 9000, 12000, 18000, 24000 BTU and more.

As for the choice for this indicator, the simplest formula is as follows: at least 100 W or 1/3 BTU of thermal power should fall on 1 m2 of the area of the room. Thus, to estimate the maximum area served, the power in watts should be divided by 100, and the power in...BTU should be multiplied by three. However, all these calculations are relevant only for standard residential/office premises with a ceiling height of about 2.5-3 m. For other conditions, you need to use a more complex formula, which is the sum of three parameters: 1) Q1 - the heat gain of the room itself, calculated by multiplying the area of the room by the height of the ceilings and the heat transfer coefficient (it ranges from 30 to 40 W, depending on the conditions); 2) Q2 - heat gain from operating equipment (on average, a third of the total power of all electrical appliances); 3) Q3 - heat gain from each person (from 100 W for sedentary work to 300 W for heavy physical exertion). More detailed recommendations regarding such calculations can be found in special sources.

A special case is represented by separately sold outdoor units of air conditioners (see "In box"). In this case, the capacity in cooling mode is the highest heating capacity of the indoor unit (in the same mode, of course) that can be connected to this outdoor unit. For multi split systems, respectively, the total indicator of all indoor units is taken into account.

The amount of air that an air conditioner can pass through itself in an hour.

This parameter depends on the power and the overall level of the device, but there is no strict dependence here: models with the same effective capacity may differ in air circulation speed. In such cases, it is worth proceeding from the fact that a higher speed contributes to uniform cooling/heating of the air and reduces the time required to create a given microclimate; on the other hand, higher-performing air conditioners use more energy, are larger and/or cost more.

The maximum and minimum level of noise produced by the air conditioner during operation; for split and multi split systems (see "Type"), by default, it is indicated for the indoor unit, and the data for the outdoor unit can be specified in the notes.

The noise level is indicated in decibels; this is a non-linear unit, so it is easiest to evaluate this parameter using comparative tables — they can be found in special sources. Here we note that, according to sanitary standards, the maximum level of constant noise for residential premises is 40 dB during the day and 30 dB at night; for offices, this figure is 50 dB, and in industrial premises higher volume levels may be allowed. So it is worth choosing an air conditioner according to this indicator, taking into account where and how it is planned to use it.

As for specific numbers, among the quietest modern air conditioners, there are models with a minimum performance of 23 – 24 dB, 22 – 21 dB, and sometimes even 20 dB or less. However, units at 31 – 31 dB and 33 – 34 dB are not uncommon; such loudness, usually, does not create discomfort in the daytime, but at night it is no longer desirable. However, in some cases, a louder air conditioner may be the best choice: noise reduction affects the cost, sometimes quite noticeably, and if the device...is not planned to be turned on at night, you can not overpay for additional noise reduction.

Additional features provided by the device.

In addition to features directly related to the main purpose (such as inverter, night mode or emergency heating), modern air conditioners can also provide very specific functions — such as ionizer, fresh air intake, air air pollution detection motion sensor, vertical blinds drive etc. For ease of operation, a connection to a smartphone and/or an advanced I Feel remote control with a temperature sensor can be provided, and for ease of maintenance, self- self-cleaning and/or self-diagnosis. Here is a detailed description of these features:

— Inverter control. The presence of a compressor with inverter power control in the air conditioner. Models without an inverter have only two modes of operation — full power and off, and the set intensity of heating/cooling is provided by turning the compressor on and off for certain periods. In turn, the principle of inverter control is to smoothly change the compressor power, which avoids constant switching on and off. It provides several advantages: minimal wear, no power surges and unneces...sary load on the mains, as well as a comfortable (low and stable) noise level. The main disadvantage of inverter models is the rather high cost.

— Automode. A function that relieves the user of the need to manually control the parameters of the air conditioner. It is enough just to set the desired microclimate in the room. After that, the unit will independently monitor the current conditions and select the desired operating mode. Most often, this function provides temperature monitoring and automatic switching between cooling and heating but advanced models may provide more advanced features, such as humidity monitoring with automatic dehumidification or even humidification.

— Timer. A function that allows you to set the time for automatic shutdown of the air conditioner. Thanks to the timer, you can, for example, start the air conditioner before going to bed and fall asleep peacefully without worrying about turning off the device — it will turn itself off after a user-defined time. And in some models, the timer is part of the night mode (see below).

— Night mode. A function that allows you to use the air conditioner as comfortably as possible at night. There are two main features of this mode. First, the fan speed is set to a minimum, which reduces noise and avoids strong air currents that can disturb sleepers. Secondly, the temperature change occurs very slowly and smoothly — by a couple of degrees within two to three hours; this is considered optimal for sleep. Additionally, in the night mode, a timer can be provided that turns off the air conditioner after 7-8 hours.

— Auto restart. Automatic restoration of air conditioner settings after a power outage. Simply put, when power is restored, a device with this function will continue to operate in the same mode as before the power outage.

— Ionizer. A module that saturates the air passing through the air conditioner with ion-charged particles. Negatively charged ions give a feeling of freshness to the air, have a bactericidal effect, and are also considered beneficial to health in general.

— Fresh air intake. Ability to mix fresh air from outside with the air passed through the conditioner. Thus, models with this function not only change the temperature and humidity of the air but also additionally refresh it. On the other hand, mixing significantly complicates both the design of the air conditioner itself and its installation. Therefore, this function is rare, and mainly in models of the middle level and above.

— Air pollution sensor. A sensor that monitors the presence of smoke, dust and other contaminants in the air passing through the air conditioner. The use of such a sensor can be different: some models can independently start the ventilation mode when pollution is detected, in others the sensor is only responsible for automatic shutdown, and ventilation must be turned on manually. However, this function greatly facilitates the monitoring of air quality.

— Motion sensor. A sensor that monitors the presence of people in the room. Using the location of people in the room, the air conditioner can change the direction of the flow away from people, thereby protecting against drafts. If the presence of people is not detected, then the air conditioner may switch to low power consumption mode and work not at full capacity, maintaining a comfortable temperature, and depending on the implementation of this functionality, it may even turn off if there is no activity in the room for a long time. It helps to save energy and provides an additional guarantee in case the user forgets to turn off the air conditioner manually.

— Vertical blinds drive. Recall that in most models the air outlet has the form of a slot, equipped with two types of blinds — horizontal (usually one), along the length, and vertical, along the height. By default, the motor drive has only a horizontal blind: this allows you to change the direction of the airflow vertically, as well as close the duct during non-working hours. However, some modern air conditioners (mostly wall-mounted, see "Installation") also provide a vertical blinds drive — it allows you to turn them from side to side, changing the direction of the horizontal airflow. It significantly expands the possibilities for setting up the unit for the specifics of the situation.

— Emergency heating. A function found in air conditioners with heating (see "Operating modes"); is intended mainly for summer cottages and other similar places that can be left unattended for a long time during the cold season. When using standby heating, the air conditioner maintains a low positive temperature in the room (about +8..10 °С). It is enough to avoid freezing of walls and damage to communications, and at the same time, energy consumption is low.

— Self-cleaning. The mode of automatic cleaning of the internal parts of the air conditioner — usually due to intensive purging with air. It allows you to remove the accumulated dust inside and dry out excess moisture and also prevents the growth of harmful microorganisms. At the same time, self-cleaning does not eliminate the need for full manual cleaning or replacement of working elements in the air conditioner filters.

— Self-diagnosis. The ability to automatically detect malfunctions and errors in the operation of the air conditioner. The specific features of the operation of this function may be different: in some models, the “health” of the unit is constantly monitored or automatically checked at certain intervals, in others, such a procedure is only started manually. Usually, self-diagnostic systems can automatically fix minor problems that do not require external intervention. More serious problems are reported to the user by the device, for example, by an error code on the display.

— Control via smartphone. The ability to remotely control the air conditioner from a smartphone or other similar device, such as a tablet. Usually, for this, you need to install a special application on the device. Such control can be more convenient and intuitive than using the remote control — the application can provide various specific parameters and functions that are not available for the remote control (for example, the schedule of work by day of the week). In addition, through the application, you can monitor the operating parameters of the air conditioner in real time — the set temperature, speed, programme, etc. — and receive notifications of problems. And some models with this feature can even be connected to the Internet — and get access to air conditioning control from anywhere in the world where there is access to the World Wide Web. Connection with the control gadget can be carried out via Bluetooth or Wi-Fi, depending on the model. For some devices, this feature may require the use of an external Wi-Fi module (see below).

— I Feel (remote control with temperature sensor). The presence of a temperature sensor in the complete remote control. Usually, such a remote control also has a separate button, when pressed, the air conditioner measures the temperature at the location of the remote control, that is, near the user. It allows you to more accurately control the microclimate than when using a sensor on the indoor unit — the device estimates the temperature at the user's location, and not at the installation site of the indoor unit.

Types of additional filters that the air conditioner is equipped with (in addition to the simplest mechanical filters that are in all models).

We emphasize that we are talking about the filters supplied in the kit; some models allow you to separately purchase additional elements for air purification, but this possibility is not taken into account in this case. As for specific options, the most popular in modern air conditioners are various antibacterial filters(including catechin elements and UV lamps), fine cleaning devices (including HEPA filters), antifungal, anti- allergic, deodorizing and formaldehyde filters, as well as elements, which combine several functions at once — plasma (electrostatic) and catalytic. Here is a detailed description of each of them:

— Plasma (electrostatic). These filters are based on the saturation of the air with negatively charged ions. Thus, a similar element also works as an ionizer (see "Functions"), even if there is no full-fledged ionizer in the design. As for air purification, plasma filters can quite effectively destroy harmful microorganisms, destroy some harmfu...l substances, and also trap particles of dust, smoke, soot, etc. These particles acquire a charge under the influence of ionized air and are attracted to the filter plates.

— Fine cleaning. This term usually refers to advanced mechanical filters that provide air filtration at a microscopic level. The effectiveness of such devices may be different; it should be specified separately in each case. Also note that the HEPAs described below are also, in fact, fine filters; however, they use a specific principle of operation and are initially characterized by high efficiency. Therefore, the presence of HEPA filters is indicated separately.

— HEPA filter. A special kind of mechanical fine filter. Due to the special design of the microchannels through which air passes in such a filter, such devices can trap particles much smaller than the diameter of the microchannels. For comparison: the effectiveness of a HEPA filter is estimated by its ability to retain contaminants with a size of 0.1 – 0.3 microns (with such particles, such a filter is the least effective), while the size of most bacteria starts at 0.5 microns. By efficiency, such filters are divided into classes; nowadays, HEPA classes from 10 (detains at least 85% of the mentioned particles) to 14 (filtration efficiency reaches 99.995%) are relevant.

— Catechin. It is a variety of antibacterial filters described below, created based on catechins, natural organic substances with a powerful antioxidant effect. Such filters are highly effective in combating bacteria and viruses. However, they are not cheap; in light of these features, they are shown in a separate category.

— Catalytic. Most often, this term means photocatalytic, or zeolite filters — devices that work due to a special substance (photocatalyst) and UV radiation. Under the influence of such radiation, the catalyst decomposes the organic matter that falls on it into simpler substances — usually water and carbon dioxide. This technology allows you not only to remove harmful impurities from the air (and at the level of individual molecules) but also provides a good bactericidal and antiviral effect. At the same time, such a filter practically does not require maintenance: the photocatalyst is not consumed during operation, and the reaction products freely escape to the outside. On the other hand, the price of such elements is quite high.

— Antibacterial. Various filters are designed to kill bacteria and other harmful organisms — viruses, fungi, etc. The specific principle of operation, the level of efficiency and maintenance rules for such filters may be different, these details should be specified in the documentation for the air conditioner. However, if air disinfection is of fundamental importance to you, such a filter will come in handy. We note only two points in this regard. Firstly, catechin elements are usually not included in this category, although they have the same purpose (see above); secondly, not every antibacterial filter can effectively fight viruses — this point needs to be specified separately.
It is also worth considering that no matter how effective the air conditioner filters are, thorough air disinfection is not its main task; specialized devices should be used for these purposes.

— Antifungal. A specialized filter for removing harmful fungi from the air, such as mould. The antibacterial devices described above also have this function to one degree or another; however, this type of filter is much more efficient in this regard. On the other hand, the need to fight intensively with fungi does not arise so often, and for other cases, the same antibacterial filters are usually quite enough. So antifungal elements in modern air conditioners are used quite rarely.

— Anti-allergic. Filters designed primarily to remove pollutants from the air that cause allergies: plant pollen (including from indoor plants), dust mites, particles of pet hair, etc. The specific principle of operation of such filters may be different, but it is worth clarifying separately. So, in relatively inexpensive air conditioners, the simplest mechanical cleaning is usually used, and the term "anti-allergenic" is more of a marketing ploy than a real description of the filter's specialization. More advanced models often include more advanced technologies, such as an enzyme filter that decomposes allergens into simple, harmless substances like water and carbon dioxide.

— UV lamp. A lamp that treats the air passing through the air conditioner with UV radiation. This treatment provides a bactericidal effect: ultraviolet light neutralizes most bacteria, viruses and fungi. However, the efficiency of such lamps is not particularly high. Nevertheless, they are a great addition to an antibacterial filter. And even without such a filter, the quality of air purification from an air conditioner with a UV lamp will be higher than that of a similar model without such a lamp.
Separately, we emphasize that this function should not be confused with the catalytic (photocatalytic) filter described above — UV lamps have a much simpler design and principle of operation.

— Deodorizing (charcoal). A specialized filter is designed, among other things, to combat unpleasant odours. It acts at the molecular level, passing ordinary air and absorbing molecules of substances that create unpleasant odours; of course, it is also capable of retaining larger particles, such as smoke. Activated carbon is most often used as a filter element — hence one of the variants of the name; there are filters based on other substances. However, they also have similar properties. Note that in any deodorizing filter, the working element must be changed periodically. When the resource is exhausted, it becomes useless and can even release harmful substances itself.

— Formaldehyde. Specialized filter for removing formaldehyde and some other harmful organic compounds (eg. ammonia, benzene and/or hydrogen sulfide) from the air. The source of such substances can be both external pollution (for example, emissions from industrial enterprises), and some items in the room itself: new furniture or curtains, some types of floor and wall coverings (immediately after application), spoiled food, cigarette smoke, etc. n. The principle of operation of filters of this type may be different. The most commonly used so-called cryocatalytic element, in which the catalyst decomposes organic matter into simpler harmless components and then restores its properties due to cold when the air conditioner is cooling. In addition, many catalytic (photocatalytic) filters have similar capabilities (see above), so one such element can be claimed in the characteristics as two types of filters at once — both catalytic and formaldehyde.

In addition to the varieties described above, other types of filters can be found in modern air conditioners, in particular:

— Air cleaner. The general name used for different types of filters. This term often denotes the simplest elements of coarse cleaning (for advertising purposes — so that the list of filters in the characteristics is larger). However, there is another option — devices created based on specific proprietary technologies and not fitting into any of the varieties described above; such devices can combine several functions (for example, fine filtration and antibacterial effect).

— Dust filter. Most often, we are talking about the simplest mechanical filter that traps dust and other relatively large particles. Almost all modern air conditioners are equipped with such devices. However, in some models, the presence of dust filters is specified separately — mainly for advertising purposes.

— With vitamin C. A filter that saturates the air with vitamin C. It is believed that such an addition has a positive effect on immunity and skin condition; there is no unambiguous evidence for this. However, in conditions of vitamin deficiency, such an adaptation will definitely not be superfluous.

— Preliminary. Mechanical coarse filter installed in front of the main set of filters. It detains relatively large contaminants, preventing them from reaching other filter elements. At the same time, the design of the preliminary filter, usually, is as simple as possible, and its maintenance is limited to periodic shaking or washing.

— Ionic (for example, Smart Ion, etc.). Usually — the same electrostatic filter (see above), however, is presented under one brand name or another.

Dimensions of the indoor unit of the air conditioner in height, width and depth.

These dimensions allow you to estimate how much space you need to place the device. In this case, of particular importance — mainly for split and multi split systems with wall mounting is the width of the indoor unit. The fact is that in terms of the height and depth of the internal blocks, most of these systems differ slightly in general but the differences in width are much more noticeable. So, the narrowest models have a width of 76 – 80 cm or less, and the largest ones occupy 91 – 95 cm, and often more. At the same time, the more powerful the air conditioner, the wider it is, usually, but there is no rigid dependence here.