Comparison Armatura Ferryt 542-955-00 vs Armatura Baryt 552-915-00

Clear Table
Add to comparison
	Armatura Ferryt 542-955-00	Armatura Baryt 552-915-00
	from $23.12 up to $26.40 Outdated Product	from $25.52 up to $26.40 Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Find prices on Amazon.uk Find prices on eBay.uk
Suitable for	for a washbasin	for a washbasin
Tap type	single lever	single lever
Spout
Shape	bent at an angle	bent at an angle
Swivel
Jet depth		150 mm
Jet height		70 mm
Specs
Stop valve	ceramic	ceramic
Water flow	12 L/min /at 3 bar/	12 L/min /at 3 bar/
Installation
Installation	desktop (horizontal)	desktop (horizontal)
Mounting holes	1 шт	1 шт
Mounting hole diameter	35 mm	35 mm
Inlet communication	hoses /G 3/8" or G 1/2"/	hoses /G 3/8" or G 1/2"/
General
Material	brass	brass
Finish	chrome	chrome
Tap height		120 mm
Color
Added to E-Catalog	february 2015	october 2012

Jet depth

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

Jet height

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

Tap height

The height of the tap, measured from its base or lowest point to the highest point of the spout. The height of the spout partly determines the installation possibilities — in fact, this is the minimum vertical free space that is required for the tap. In addition, in models with horizontal installation (see "Type of installation"), the spout height is related to the jet height (see below).