Heating element
The type of heating element provided in the device.
- Tubular heater, an element in the form of a tube, inside which there is a heating coil and a filler made of sand, ceramics, oil or other heat-conducting material/liquid. Heating elements do not heat up as quickly as spirals, and are somewhat more expensive; on the other hand, they are more fireproof. Moreover, the relatively low operating temperature prevents (at least partially) the combustion of dust and the appearance of unpleasant odours.
-Spiral — in this case, an open electric spiral is meant. Provides fast heating due to the high operating temperature. However, of all types of heating elements, it is the most fire-hazardous, and dust on the coil causes an unpleasant odor.
- Ceramic. The heating element constructed using ceramic plates. In this case, we are talking about a classic heater, which provides heating mainly due to convection; models with IR heating are placed in a separate category (see below). The main advantage of ceramic heaters over tubular heater and spiral heater is a relatively low operating temperature, which not only prevents the combustion of dust but also reduces the risk of burns (and the likelihood of fires is reduced to almost zero). In addition, ceramic elements are reliable and durable. Their main drawback is their high price.
— Ceramic with IR heating. Ceramic heaters (see above), are capable of providing heating not only due to direct contac...t with air but also due to infrared radiation. They are mainly used in convectors, but can also be installed in infrared heaters. Recall that IR radiation does not heat the air, but directly the objects to which it is directed, while the heat from heating is felt instantly, but only as long as the heater is turned on. Convection, in turn, allows you to warm up the entire volume of air in the room, but this can take quite a long time. The combined heater combines the advantages of these methods of operation and mutually compensates for their shortcomings: with its help, you can quickly heat individual parts of the room and, at the same time, warm the air inside. This can be useful, for example, if you need to heat a cold room and at the same time quickly warm yourself. The main disadvantage of elements of this type can be called a high cost. It is also worth considering that a specialized heater will be more appropriate than a universal one — for example, it is more reasonable to use classic IR heaters outdoors since the heat from the convector in such conditions will “fly away into the atmosphere”. A heating element consisting of a heating element and an IR heater also works on a similar principle. See above for more details on the operation of the heating element.
— Heat exchanger. A heating element found exclusively in gas heaters (see "Power supply"). It has the form of a long curved tube: through it, the products of combustion of gas move from the burner to the chimney, cooling down along the way and giving up their heat to heat the room. For more efficient heat transfer, the surface of the tube can be supplemented with fins, plates and other elements that increase the area of contact with air.
- Stitch heater. At the heart of the stitch heater is a set of thin and long metal protrusions, similar to needles. One of their key advantages is the almost instantaneous heating to operating temperature. On the other hand, this temperature is higher than that of heating elements, which leads to rapid drying of the air and increases the likelihood of unpleasant odours (dust or other contamination that gets on the needles is likely to be burned). Stitch heaters are found exclusively in convectors (see "Type").
Max. power
The maximum power of the heater. The meaning of this parameter depends on the device type and power supply (see above). So, for most types of heaters, we are talking about the highest power output. However, for fan heaters, this parameter also includes the power of the fan motor, and the heating capabilities are somewhat more modest than the claimed maximum power (although not by much). For electric models, the maximum power also corresponds to the maximum power consumption, which determines the connection requirements: for example, for devices of 3.5 kW and more, ordinary sockets are no longer suitable, and some require not 230 V but 400 V.
However, the key point determined by the power of the heater, is the intensity of heating and the ability to effectively heat a particular room. To select the appropriate model, there are special formulas. So, if we are talking about a city apartment or a small office space with a ceiling height of about 2.5 m, then we can assume that a heating power of at least 100 W is required per 1 m² of area. For other situations, more complex methods are used, taking into account the volume of the room, the degree of thermal insulation, climate and solar heating, etc.; they can be found in special sources. Also note that for IR heaters (see "Type"), their own calculation methods are used — this is due to the specific format of work.
Heating area
The area that the device can effectively heat. This parameter directly depends on the maximum power (see above). It should be noted that the actual efficiency of the heater in most cases does not depend on the area but on the volume of the room. Thus, the heating area can only be specified for a certain ceiling height. In most cases, manufacturers mean 2.5 m — this is the standard ceiling height in city apartments. If the ceilings are much higher, the heating area must be recalculated using special formulas. In general, it is worth orienting that 1 kW is enough for 10 m². However, manufacturers may slightly overestimate the heating area data.
