Comparison LG F4J5TS6W white vs LG F4J5TN9W white

The volume of water used by the washing machine during a standard wash cycle. It is measured while washing the maximum amount of cotton underwear for this model with a normal programme and a temperature of 60 degrees.

When evaluating efficiency, one should consider not only the actual water consumption but also the maximum load. So, for example, a model with a load of 7 kg and a consumption of 49 litres per kilogram of laundry will be more economical than a model of 5 kg with a consumption of 40 litres: the first consumes 49/7 = 7 litres per 1 kg of laundry, the second 40/5 = 8 litres per kilogram. This moment is important, first of all, if a large amount of washing is expected.

Many modern automatic washing machines are equipped with intelligent systems that can adjust the water consumption to the actual load and avoid overspending.

A special washing mode. Instead of water, hot steam is supplied to the drum of the machine. Steam penetrates better between the fibres of the fabric, which makes washing more effective than washing with hot water. At the same time, due to the high temperature of the steam — above 100 degrees — the best antibacterial effect is achieved since water in the liquid state rarely heats up above 95 degrees in washing machines. In addition, steam wash saves water and electricity, but such machines themselves are quite expensive.

Power surge protection automatically turns off the washing machine in case of power surges. It protects the device's electronic circuits from hazardous loads and prolongs their service life. In this case, the programme running at the time of shutdown is remembered. And when the power is restored washing cycle continues from the point at which it stopped.

Diameter of the hatch of the front loaded washing machine. On the one hand, the larger the hatch, the more convenient it is to load laundry into the machine, especially large items like bedding. On the other hand, a large hatch requires adequate space in front of the machine.

General dimensions of the washing machine in height, width and depth.

The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.

Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional...— high cost.

The country in which the washing machine was manufactured (according to the manufacturer's statement). Despite the fact that production facilities in China are often used to assemble household appliances, specifically among washing machines there are many products assembled in Europe ( Germany, Italy, Poland, Romania, Slovakia, Slovenia, Turkey) or in the post-Soviet space ( Belarus, Russia, Ukraine).

There are many stereotypes about how the build quality depends on the specific "homeland" of the device. However, most of them are not justified: the thoroughness of quality control does not depend directly on the location of production. And within individual brands, the situations in this regard can be completely opposite: relatively speaking, for one company, Polish-assembled machines can be considered more reliable than Romanian ones, and for another, vice versa. In addition, such information (about which plant a given brand has is better) often turns out to be unconfirmed rumours. In light of all this, it makes sense to pay attention to the country of production. Especially if you fundamentally want (or do...not want) to support a certain state by purchasing products manufactured in it.