Comparison Scarlett SC-EK27G55 2200 W 1.7 L stainless steel vs Scarlett SC-EK27G58 2200 W 1.7 L stainless steel

Clear Table
Add to comparison
	Scarlett SC-EK27G55 2200 W 1.7 L stainless steel	Scarlett SC-EK27G58 2200 W 1.7 L stainless steel
	from £29.95 Outdated Product	Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Find prices on Amazon.uk Find prices on eBay.uk
Main		5 heating modes. Flask made of heat-resistant glass Crystal Pro. Colour illumination of temperature modes.
Type	Electric Kettle	Electric Kettle
Volume	1.7 L	1.7 L
Technical specs
Power consumption	2200 W	2200 W
Heating element	hidden	hidden
Coating of the heating element	stainless steel	stainless steel
Water level indicator	+	+
Thermostat
Temperature adjustment	40, 70, 80, 90, 100 °C	40, 70, 80, 90, 100 °C
Maintaining t° (kettle)
Opening the lid with a button
General
Body shape	conical
Backlight	/colour change depending on temperature/	/colour change depending on temperature/
Material	glass	glass
Cable length		0.7 m
Dimensions		24x21x16 cm
Weight		1.1 kg
Color
Added to E-Catalog	may 2019	april 2019

Body shape

The general shape of the body of the electric kettle.

— Conical. The most popular option: a body is wide at the base and tapering upwards. This form contributes to stability: the centre of gravity is maximally displaced downwards. However washing such a kettle from the inside may not be very convenient due to the relatively small size of the opening in the upper part.

— Cylindrical. The cylindrical shape provides more or less the same width of the body at the base and at the top. With the same height and base diameter, such kettles hold slightly more water than conical ones; in addition, such a device is easier to clean due to the wide opening for the lid.

— Inclined. The body which is inclined forward; the width of such a body is usually more or less the same over the entire height. Such kettles have an unusual, eye-catching appearance; in addition, it is easier to pour water from them — the device must be inclined at a smaller angle than with a cylindrical and even with a conical body. However, this option does not provide fundamental advantages over the same cylindrical shape, but it is more expensive, and therefore is not common.