Comparison Redmond SkyKettle G212S 2200 W 1.7 L white vs Midea MK-8007 2200 W 1.7 L stainless steel

A device that allows you to estimate the amount of water in the kettle without opening its lid. Most often the water level indicator has the form of a scale applied either to the transparent wall of the container, or to a transparent insert in an opaque wall. In any case, this function allows you to measure the volume of filled water quite accurately, and not just determine it “by eye”. This possibility is especially important for models with open coils (see "Heating element"), in such devices, a mark on the indicator is usually applied to the minimum allowable water level.

A device that allows you to set the temperature to which the water will be heated — the thermostat monitors the temperature and automatically turns off the heating when the desired value is reached. In fact, water heated in a kettle does not always need to be boiled: for example, for brewing some types of tea, the optimum temperature is about 80 °C, and for preparing baby food — 60 °C. Thermopot are most often equipped with a thermostat, but there are also classic electric kettles with such a function.

Kettles (see "Type") in which the lid opens at the touch of a button. This opening is faster and more convenient, and often safer than the traditional way (grab the lid and pull it up): the lid can get quite hot when the kettle is in operation, and long contact with it is fraught with burns. And although the button can also be placed on the lid, a short press is enough to activate it, and even in such cases the risk of getting burned is minimal. On the other hand, opening the lid with a button complicates the design of the kettle and reduces its reliability.

The ability to remotely control the kettle from a smartphone, tablet or other similar gadget with a special application installed. The connection can be made via Wi-Fi or Bluetooth.

This feature does not only allow you to control the device from a distance, but often gives you more options than the classic control method. For example, special "chips" like a timer or thermostat can only be accessed through the application. In addition, the information about the operation of the kettle is transmitted to the application — for example, thermometer data, status (on/off), etc. Due to plenty of features, models controlled from a smartphone are often called “smart kettles”. Their main disadvantage is their high cost.

The general shape of the body of the electric kettle.

— Conical. The most popular option: a body is wide at the base and tapering upwards. This form contributes to stability: the centre of gravity is maximally displaced downwards. However washing such a kettle from the inside may not be very convenient due to the relatively small size of the opening in the upper part.

— Cylindrical. The cylindrical shape provides more or less the same width of the body at the base and at the top. With the same height and base diameter, such kettles hold slightly more water than conical ones; in addition, such a device is easier to clean due to the wide opening for the lid.

— Inclined. The body which is inclined forward; the width of such a body is usually more or less the same over the entire height. Such kettles have an unusual, eye-catching appearance; in addition, it is easier to pour water from them — the device must be inclined at a smaller angle than with a cylindrical and even with a conical body. However, this option does not provide fundamental advantages over the same cylindrical shape, but it is more expensive, and therefore is not common.

The name of the controller installed in the device.

The controller is called an electronic circuit, which is directly responsible for managing the operation — primarily for turning off the heating when boiling or turning on without water. In our catalog, the name of such a circuit is specified if we are talking about an advanced controller that significantly exceeds most solutions on the market in terms of quality and reliability. At the same time, the specs indicate not a specific model, but a general brand — this is quite enough in this case.

The most reliable, durable and safe nowadays are the controllers of the British manufacturers Strix and Otter. There are no fundamental differences between these options in this regard, any of them is a sign of a quality kettle (even if the overall functionality of the device is rather modest). On the other hand, such equipment affects the price.