Comparison Atlant XM-4008-022 white vs Atlant MXM-2826-90 white

The total capacity of the refrigerator is the total capacity of all the main working chambers: refrigerating, freezing, zero, and wine chambers. The set of these chambers, of course, will be different in different models (see more about them above). Here we note that large volumes, on the one hand, simplify the storage of numerous products and, on the other hand, affect the dimensions and price of the unit. It is also worth considering that refrigerators of the same total capacity may differ in the capacity of individual chambers.

The total capacity of the main working chamber of the refrigerator. If there are separate zero chambers, compartments for wine and other additional functions, this paragraph takes into account only the volume of the refrigerating chamber itself, without additional equipment. In the smallest modern units, this figure does not even reach 100 liters, in the largest it can exceed 400 liters.

The choice of capacity depends on the actual storage needs of the products. At the same time, both the volume of stocks and the frequency of their replenishment (every day, once a week, etc.) matter. The chamber should not be stocked completely; this adversely affects the quality of the refrigerator. On the other hand, it is worth remembering that large volumes accordingly affect the dimensions and price of the unit.

In general, for one or two people, a capacity of 200 – 250 liters, or even less, is considered quite sufficient. The optimal capacity for a family of three is about 250 – 300 liters, for four to five people — 300 – 350 liters, and larger volumes are really needed mainly for specific situations when food has to be stored in large quantities and for a long time.

The number of shelves supplied with the refrigerator. In this case, only shelves placed inside the main (refrigeration) chamber are taken into account. And closed drawers, which are usually at the bottom, are not considered shelves.

In general, this amount depends on the volume: the more spacious the refrigeration compartment, the more shelves are usually provided in the kit. At the same time, there is no strict dependence here, and refrigerators of similar capacity can be equipped with a different number of shelves. As for specific options, the most modest models come with 1 – 2 shelves, 3 shelves and 4 shelves can be called an average, and more are found in some units.

In most modern refrigerators the shelves are removable. In addition, they can be installed at different levels. In this case, it is not necessary to use the entire set: for example, if it is planned to place tall objects inside, one of the shelves can be removed, creating a vast space. And vice versa: if necessary, you can, usually, buy additional shelves. So the number of shelves in the kit only allows you to evaluate the overall possibilities for organizing space in the refrigerator. How to use these features depends on the user.

The freezer, if present, may be positioned differently relative to the main compartment of the refrigerator. In classic units and French Door models (see "Product type"), the bottom location of the freezer is found predominantly (in some cases, such a freezer has a retractable design). The top location is noticeably less popular, although it is also used quite often. Side-by- side freezer models are almost all in the Side-by-Side category (see "Type"). And some modern refrigerators may not have a freezer at all. Here is a more detailed description of each option:

— Bottom. By installing the freezer at the bottom, you can raise the main (refrigerator) compartment to the optimum height: it will be in front of the user’s eyes, and you will not have to bend down to access the contents of this compartment. That is why this option is the most popular nowadays: most users often need access to the main volume of the refrigerator, and a freezer is required relatively rarely. Note that we are talking about classic freezers with doors; drawer freezers are placed in a separate category, described below.

— Bottom (retractable). Freezer with a bottom location, made in the form of a drawer. The general advantages of the bottom location are described above. And the retractable design provides added convenien...ce for the user, relieving him of the need to make unnecessary movements: to access the contents, it is enough to pull out the drawer without having to open the door first. On the other hand, such freezers are more demanding on the quality of thermal insulation, which affects the cost of the entire refrigerator. In addition, the pull-out chamber is one common container, without division into levels, while such chambers are rarely provided for more than two — this limits the possibility of separating different types of products into different compartments of the freezer.

— Top. The top position of the freezer makes it easy to access the contents without having to bend over. On the other hand, you will most likely have to bend over to access the main compartment. So this layout option is not as common as the bottom freezer installation and is mainly in two categories of refrigerators. The first is individual models of classic layout or French Door layout (see "product type"); many of them have a large overall height, which partly compensates for the features of the top location of the freezer. The second variety is compact units of small volume in which the freezer is installed inside the main compartment and does not have its outer door. In such cases, the top setting is considered optimal for several technical reasons.

— Side. The traditional option for Side-by-side units (see "Product type"), which is practically not found in other types of refrigerators. Note that the side freezer in such cases does not necessarily occupy the entire height of the refrigerator — it can be combined, for example, with a fresh zone or a wine chamber. In some models, freezers with this arrangement can even be equipped with separate doors. Although usually all compartments on one side of the unit are still covered by one common door.

— No freezer. By definition, single-chamber models do not have a freezer compartment (see "Number of chambers"); at the same time, in this category, there are both compact and rather large and roomy refrigerators. You can also find two-chamber units without a freezer on the market — in them the main compartment is usually complemented by a clearly defined fresh zone, but there is only one door, common to both compartments. Another type of unit with this feature is display refrigerators (see "Product type").

The capacity of the freezer installed in the refrigerator. Such a chamber is designed to store products at temperatures well below zero (on average -18 °C). Its capacity is related to the total capacity of the refrigerator (and the capacity of the main, refrigerating chamber). However, there is no strict dependence here — models with a similar volume of the refrigerating chamber can be equipped with freezers of different sizes.

When choosing by capacity, it is worth considering how much frozen food you plan to store at a time. Note that it is undesirable to fill the freezer completely — this negatively affects the efficiency of work. However, if this chamber is planned to be used only occasionally, and you do not plan to keep numerous products in it, you can not chase after the capacity: for such cases, 25 – 50 liters, or even smaller capacities, are enough. In the smallest modern refrigerators, the freezer capacity does not exceed 10 liters. And vice versa, very roomy freezers come across — for 176 – 200 liters and even more. Such volumes are typical mainly for side-by-side and French door units (see "Product type"). However, they are also found in models of the classic two-chamber layout.

The number of drawers into which the refrigerator freezer is divided. For top-mounted freezers (see “Freezer”), this paragraph may indicate the number of levels, taking into account the shelves the fridge is equipped (drawers are not used in such chambers).

On the one hand, the abundance of drawers makes it easy to distribute different types of foods in different compartments. On the other hand, more drawers (for the same total freezer capacity) mean less height and capacity for each drawer. So when choosing, you should consider what is more important for you — extensive possibilities for sorting content or the capacity of individual drawers. As for the specific quantity, most modern refrigerators have 3-drawer freezers — this number is generally considered the best compromise between the nuances described above. A larger number of drawers is found mainly in high-capacity units, but 1 – 2 freezer drawers can be found in all types of refrigerators — from small classic to large French Door and Side-by-Side (see "Product type").

The autonomy time provided by the refrigerator when the power is turned off.

Often, this parameter describes the capabilities of the freezer. In such cases, the autonomy time is indicated as the time during which, at an outside temperature of +25 °C, the temperature in the filled freezer does not rise above -9 °C (this level is considered critical for the storage of frozen foods). Accordingly, the actual autonomy time may differ from the claimed one — depending on the ambient temperature, the frequency of opening the refrigerator, etc. However, this parameter describes the quality of thermal insulation quite accurately, and it is possible to evaluate different models and compare them with each other.

Also, autonomy time can be given for models without freezers: in such cases, we are talking about the time during which the temperature in the refrigerator compartment remains at an acceptable level under approximately the same conditions.

Approximate amount of fresh food that a refrigerator can completely freeze from room temperature to freezer operating temperature in 24 hours. Power up to 10 – 15 kg/day will be quite enough for everyday use, but if you plan to freeze food in large volumes and often — you should pay attention to more performant freezers.

The type of controls for refrigerators is indicated primarily by the type of control panel. Often its location is also taken into account. According to these criteria, nowadays, the following options are distinguished: rotary knobs, internal push-buttons, external push-buttons, internal touch controls and external touch controls. Here are the features of each of these options:

— Rotary knobs. Control using rotary knobs. Such knobs are traditionally installed inside the refrigerator, so in this case, the location is not specified. In general, this is the simplest and most inexpensive option used in units of the appropriate level. Most often, there is only one rotary knob; it is directly connected to the thermostat and regulates only the temperature inside the refrigerator (and even then very approximately). However, even this is often quite enough — especially if the refrigerator is operated in more or less constant temperature conditions (for example, in a home or office kitchen). In many cases, the matter is limited to choosing a more or less suitable knob position once and then not touching the settings at all. In addition, the unambiguous advantages of this type of control are reliability and ease of repair.

— Internal push-buttons. Push-buttons are generally considered more advanced th...an rotary knobs. The specific functionality of refrigerators with such control may be different, but among them, models with additional functions and the ability to fine-tune the temperature (and sometimes even humidity) are noticeably more common. As for the interior layout, it allows you to hide the panel behind the refrigerator door, providing a neat appearance with a minimum of protruding parts. And if the door has a child lock, in this case, it also performs the function of protecting against children. However, to access the controls you have to open the refrigerator — but this moment is generally not critical: such access is not needed so often, and changing settings does not take much time.

— External push-buttons. Like the internal push-buttons (see above), such controls are typical mainly for fairly advanced models (although exceptions are possible). And the external location is convenient because you do not need to open the door to access the settings. On the other hand, the real need for such an arrangement is not so often, and push-buttons must also fit into the overall design of the unit (which is not always possible to do in the best way). As a result, the external version of push-button controls is much less common than the internal one.

— Internal touch controls. Internal touch controls are considered the next step in the development of controls, after buttons. So, they look stylish and technologically advanced, they do not need to be pressed hard (just touched), and there are no protruding parts, corners and cracks on the surface of the panel, which simplifies cleaning from dirt. Accordingly, the presence of touch controls is typical mainly for refrigerators of the middle and top levels. It costs a little more than a push-button one, but this is imperceptible against the background of the total price of the units. But specifically, the internal location is much less common than the external one. It is because there is no need to hide the touch sensors behind the door — they can be easily fit into the external design of the refrigerator.

— External touch controls. The general features of touch controls are described above. And external touch panels in refrigerators are used much more often than internal ones: such panels can be given almost any appearance, optimally fitting them into the design of the refrigerator. Besides, placing them outside allows you not to open the door again to access the settings.