Comparison Atlant XM-4008-022 white vs Atlant XM-6021-031 white

The total capacity of the refrigerator is the total capacity of all the main working chambers: refrigerating, freezing, zero, and wine chambers. The set of these chambers, of course, will be different in different models (see more about them above). Here we note that large volumes, on the one hand, simplify the storage of numerous products and, on the other hand, affect the dimensions and price of the unit. It is also worth considering that refrigerators of the same total capacity may differ in the capacity of individual chambers.

The refrigeration circuit can be described as a heat sink system that has a separate connection to the compressor (see “Number of compressors”) and a separate, independent from other similar systems, regulation of the operating mode.

In the most common variety of modern refrigerators — two-chamber models with a freezer — both one common circuit for both chambers and 2 circuits can be provided. The second option is more expensive, but it gives an important advantage — in such refrigerators, you can completely independently control the operating modes of the refrigeration and freezer compartments. If there is only one circuit, these adjustments turn out to be interconnected: for example, when you turn on the fast freeze mode (see "Features"), the main chamber also starts to work at increased cooling power, which is not always desirable.

As for refrigerators with three or more chambers, usually, the number of circuits in them is less than the number of chambers — otherwise, the design would be unnecessarily complex, cumbersome and expensive.

The compressor is a kind of "heart" of the refrigerator — a pump that circulates freon through the cooling circuits and transfers heat from the contents to the outside.

Most modern refrigerators have one compressor that serves all the chambers at once (if there are several). This design turns out to be as simple as possible, inexpensive and, at the same time, quite functional. For example, it does not interfere with regulating the conditions in different chambers separately (for this, separate cooling circuits serviced by a common compressor are provided). On the other hand, such a refrigerator can only be defrosted as a whole (there is no possibility of completely turning off individual chambers). And when the compressor fails, the entire unit becomes useless.

In turn, more advanced models with 2 compressors(or even more) are devoid of these shortcomings. These compressors (and the chambers connected to them) can be turned off individually, defrosting the refrigerator chambers separately without having to completely unload the contents. And if one pump breaks down, the second one remains operational, and at least some of the chambers also retain their functionality. On the other hand, such a design greatly increases the cost, and its advantages are not so often decisive. Therefore, there are few two-compressor refrigerators nowadays, mostly premium models. And a larger number of pumps is found only in some top models fo...r four chambers or more.

The total capacity of the main working chamber of the refrigerator. If there are separate zero chambers, compartments for wine and other additional functions, this paragraph takes into account only the volume of the refrigerating chamber itself, without additional equipment. In the smallest modern units, this figure does not even reach 100 liters, in the largest it can exceed 400 liters.

The choice of capacity depends on the actual storage needs of the products. At the same time, both the volume of stocks and the frequency of their replenishment (every day, once a week, etc.) matter. The chamber should not be stocked completely; this adversely affects the quality of the refrigerator. On the other hand, it is worth remembering that large volumes accordingly affect the dimensions and price of the unit.

In general, for one or two people, a capacity of 200 – 250 liters, or even less, is considered quite sufficient. The optimal capacity for a family of three is about 250 – 300 liters, for four to five people — 300 – 350 liters, and larger volumes are really needed mainly for specific situations when food has to be stored in large quantities and for a long time.

The number of shelves supplied with the refrigerator. In this case, only shelves placed inside the main (refrigeration) chamber are taken into account. And closed drawers, which are usually at the bottom, are not considered shelves.

In general, this amount depends on the volume: the more spacious the refrigeration compartment, the more shelves are usually provided in the kit. At the same time, there is no strict dependence here, and refrigerators of similar capacity can be equipped with a different number of shelves. As for specific options, the most modest models come with 1 – 2 shelves, 3 shelves and 4 shelves can be called an average, and more are found in some units.

In most modern refrigerators the shelves are removable. In addition, they can be installed at different levels. In this case, it is not necessary to use the entire set: for example, if it is planned to place tall objects inside, one of the shelves can be removed, creating a vast space. And vice versa: if necessary, you can, usually, buy additional shelves. So the number of shelves in the kit only allows you to evaluate the overall possibilities for organizing space in the refrigerator. How to use these features depends on the user.

Separate zones that help expand your food storage options. Among these there are multizone — , fresh zone, humidity zone, low temperature zone, wine chamber, bottle rack. More details about them:

— Fresh zone. A special compartment designed for long-term storage of fresh vegetables, herbs and other similar food. Such a compartment can be made in the form of a completely separate chamber. In such cases, it is called the zero chamber and its volume is separately indicated in the specifications. However, more often the fresh zone is located inside the main compartment. Anyway, the humidity in this zone is somewhat higher than in the refrigeration compartment, and the temperature is somewhat lower: in some models, it is about zero (which allows you to store raw meat or fish), in others it is about +1 .. .3 °C (this is only suitable for fruits, vegetables and cheeses). Anyway, the moisture from the products in the fresh zone does not evaporate as quickly as in the main chamber, and the contents retain their original appearance and taste longer. This feature is especially useful if there is a No Frost system (see above) in the refrigeration chamber of the unit.

— Humidity zone. Another feature designed for long-term storage of fresh food is similar to the fres...h zone described above. The difference is that freshness is preserved solely due to the increased humidity of the air (hence the name). The temperature corresponds to the temperature in the refrigeration chamber. The humidity zone is intended mainly for storing vegetables and fruits; in some refrigerators, this compartment has a humidity control that allows you to optimally adjust it to different types of contents (detailed recommendations on this can be found in special sources)

— Low temperature zone. A compartment in which a lower temperature is maintained than in the main chamber of the refrigerator. Typically, fresh meat or fish are supposed to be stored in the low-temperature compartment. The presence of such a compartment allows you to more effectively organize long-term storage of food in the refrigerator and keep it fresh longer.

— Multizone. A compartment that combines the functions of several compartments at once. The simplest option is the ability to work in the mode of a refrigerator or freezer. However, in modern refrigerators, there are multizones with more extensive capabilities. These features can be quite specific — like quickly cooling drinks, slow defrosting, and even cooling hot dishes. So the specific features of the multizone should be specified separately. Nevertheless, its presence significantly expands the capabilities of the refrigerator. Also, in some models, the entire freezer performs the function of such a chamber. However, most often the multizone is still designed separately from other chambers.

— Wine chamber. Specialized compartment for long-term storage of wine. Usually, a temperature of +10..12 °С is maintained in such a compartment — it is this temperature considered optimal for this task. Some models may also provide the possibility of more precise temperature settings — for different types of wine. The traditional equipment of a wine chamber includes a shock-absorbing system that dampens vibrations from the compressor and other shocks, as well as carbon filters to protect against foreign odours; and the door of such a chamber is traditionally made transparent — so that you can see the collection of wines without opening the refrigerator.
Nowadays, this function is found only in some premium refrigerators. It is because most wine connoisseurs prefer to use specialized wine coolers: such devices are less bulky and often more functional.
— Bottle rack. Shelf of a special design for the convenience of storing bottles in the refrigerator. It has the form of stands of a wavy shape. In the recesses of such "waves" it is convenient to keep bottles of small or medium size: they do not roll over the refrigerator and are at hand; you just need to open the door.

The capacity of the freezer installed in the refrigerator. Such a chamber is designed to store products at temperatures well below zero (on average -18 °C). Its capacity is related to the total capacity of the refrigerator (and the capacity of the main, refrigerating chamber). However, there is no strict dependence here — models with a similar volume of the refrigerating chamber can be equipped with freezers of different sizes.

When choosing by capacity, it is worth considering how much frozen food you plan to store at a time. Note that it is undesirable to fill the freezer completely — this negatively affects the efficiency of work. However, if this chamber is planned to be used only occasionally, and you do not plan to keep numerous products in it, you can not chase after the capacity: for such cases, 25 – 50 liters, or even smaller capacities, are enough. In the smallest modern refrigerators, the freezer capacity does not exceed 10 liters. And vice versa, very roomy freezers come across — for 176 – 200 liters and even more. Such volumes are typical mainly for side-by-side and French door units (see "Product type"). However, they are also found in models of the classic two-chamber layout.

The number of drawers into which the refrigerator freezer is divided. For top-mounted freezers (see “Freezer”), this paragraph may indicate the number of levels, taking into account the shelves the fridge is equipped (drawers are not used in such chambers).

On the one hand, the abundance of drawers makes it easy to distribute different types of foods in different compartments. On the other hand, more drawers (for the same total freezer capacity) mean less height and capacity for each drawer. So when choosing, you should consider what is more important for you — extensive possibilities for sorting content or the capacity of individual drawers. As for the specific quantity, most modern refrigerators have 3-drawer freezers — this number is generally considered the best compromise between the nuances described above. A larger number of drawers is found mainly in high-capacity units, but 1 – 2 freezer drawers can be found in all types of refrigerators — from small classic to large French Door and Side-by-Side (see "Product type").

Approximate amount of fresh food that a refrigerator can completely freeze from room temperature to freezer operating temperature in 24 hours. Power up to 10 – 15 kg/day will be quite enough for everyday use, but if you plan to freeze food in large volumes and often — you should pay attention to more performant freezers.