Comparison LikeBike Fatty vs LikeBike Bruiser

Approximate distance that an electric bike can travel on a single battery charge. Specifications usually indicate an estimated value, as the actual range depends on the chosen level of assistance, rider's weight, terrain, speed, temperature, and tire pressure. For example, in economy mode, an e-bike can travel significantly further than when constantly riding with maximum support and speed downhill.

The electric motor rating in watts, which shows how actively it assists during acceleration, uphill riding, and riding with a load. For relaxed city trips and bike paths, a motor of around 250 W is often sufficient; for suburban routes, hills, and heavier riders, a reserve of 350–500 W is more convenient, while ratings of 750 W and above are more common on powerful fat bikes, cargo, and off-road models. When choosing, keep in mind that high power drains the battery faster and does not always mean higher speed: actual performance is also affected by torque, bike weight, battery capacity, and controller settings.

The maximum speed at which an electric bike can accelerate using the electric motor. For relaxed city rides and bike paths, models with a limit of around 25 km/h are usually sufficient, while options with speeds of approximately 30–35 km/h are found for suburban routes and more dynamic riding. Higher speeds are more common in powerful off-road bikes, fat bikes, and high-speed models.

It is worth considering that the actual speed depends on the motor's power, rider's weight, battery charge, terrain, wind, and controller settings. In some cases, it may also be limited by traffic regulations or firmware.

The wheel size of an electric bicycle in inches affects compactness, stability, rolling, and passability. The larger the wheel, the easier it rolls over bumps and maintains speed, but the bigger the bike itself becomes.

Small 20″ wheels and below are typical for folding e-bikes, 26″ is well-suited for city rides, leisure, and basic off-roading, while 27.5″, 28″, and 29″ are often chosen for mountain, road, touring, and high-speed models.

Brake mechanism on the front wheel, responsible for a significant part of the bicycle’s deceleration. This component is especially important for an e-bike due to its greater weight and higher speed: on descents, wet asphalt, dirt roads, and during sudden stops, the type of brake affects not only comfort but also safety.

— Rim. The pads press against the wheel rim and slow the bicycle through friction. This type of brake is simple, lightweight, and inexpensive to maintain, but performs worse in rain, mud, and under heavy loads, so it is better suited for relaxed city riding and budget models.

— Mechanical disc. The brake pads clamp a disc on the wheel hub, with force from the lever transmitted via a cable. Compared with a rim disc brake, it performs more consistently on wet roads and is better suited for a heavy e-bike, but requires periodic adjustment of the cable and pads.

— Hydraulic disc. Force from the lever is transmitted to the brake caliper through hydraulic fluid. This type of brake usually provides the most powerful and precise stopping performance, making it well suited for electric mountain bikes, fat bikes, descents, high speeds, and riding with loads, but it costs more and is more difficult to maintain.

— Roller. An enclosed hub brake in which deceleration takes place inside a special mechanism with rollers. It is well protected from dirt and rain, does not require frequent adjustment,...and is convenient for city bicycles, but is less powerful than disc brakes during active riding and long descents.

— Drum. The brake mechanism is located inside the hub, where the pads press against the inner surface of the drum. This design is protected from moisture and dirt, durable, and low-maintenance, but is usually heavier and less effective during sudden braking than disc systems.

The braking mechanism on the rear wheel, which helps control speed, stabilize the bicycle, and safely modulate deceleration. On an electric bike, it is especially important when riding downhill, on rough terrain, wet roads, and with additional load, although the main braking force is usually on the front wheel. — Rim. Pads press against the rim of the rear wheel and slow the bike down through friction. This brake is simple, lightweight, and inexpensive to maintain, but performs worse in rain, mud, and when the rim is worn, so it is better suited for calm city rides. — Mechanical disc. Pads clamp the brake disc on the rear wheel, and the force from the handle is transmitted by a cable. This is a more stable option for an electric bike than a rim brake: it handles moisture and dirt better but requires periodic adjustment of the cable and pad position. — Hydraulic disc. The brake disc is clamped by a caliper, and the force is transferred through hydraulic fluid. This rear brake is well-modulated, requires less effort on the handle, and is suitable for heavy e-bikes, mountain routes, fat bikes, descents, and active riding. — Roller. A closed hub brake, with a mechanism containing rollers located inside the housing. It is protected from dirt and rain, requires almost no attention in daily use, and is convenient for city models, but is less powerful than disc brakes during sharp deceleration and extended descents. — Drum. Pads work inside a drum in the hub of the rear wheel. T...his design is durable, protected from the environment, and suitable for leisurely rides, but usually heavier and less effective at intensive braking than the disc system. — Coaster. Braking is activated by pedaling backward, and the mechanism is usually located in the rear hub. This is a simple and dirt-protected solution for city and leisure bikes, but it is less suitable for high-speed electric bikes, steep descents, and situations requiring precise modulation of braking force.

The number of gears indicates how many mechanical shifts are available to the rider for changing the pedaling effort. Simple transmissions with a small number of gears may suffice for city e-bikes, while a wider range of gears is more convenient for hills, long routes, off-road terrain, and riding without active motor assistance. However, a large number of gears does not always mean a faster e-bike: it primarily affects the convenience of riding in different conditions, not the maximum speed of the electric motor.

This point should not be confused with the motor speed modes: gears change the operation of the chain and sprockets, while modes change the level of assistance from the electric drive.

Bicycle drivetrain component that moves the chain between gears to select the desired gear. Specifications usually include the series or manufacturer name, such as Shimano, SRAM, Microshift, Shimano Tourney, Altus, Acera, Alivio, Deore, and other options. This helps to roughly understand the drivetrain class, shifting precision, compatibility with the number of speeds, and maintenance level.

The specific name or series of the gear shifter installed on the bicycle handlebar. This point can indicate the class of the component, compatibility with the number of speeds, and the approximate level of shifting precision: for example, simple Shimano Tourney is often found on basic city models, while Shimano Altus, Acera, Deore, SRAM NX, or GX are found on more versatile and advanced bicycles.