Comparison Keter 3 Drawer Tool Chest vs Stanley 1-70-326

A common type of container for tools. In addition to traditional boxes, nowadays there are such types as a case, organizer, bag, backpack, waist bag (holster), vest (apron), soft case (organizer), tray, trolley and the original box-chair, which can be in the shape of a bag. Here are the main features of these options:

- Box. In this case, boxes mean containers made of hard material (metal or plastic, see below), usually rectangular in shape, in which the bottom and 4 walls form a solid structure, and the cover (removable or hinged) is located on top and secured with special locks. In some models, the role of the cover can be played by sliding sections(see below). The boxes are designed primarily for storing tools in one place and carrying them over short distances (within the workshop or between the storage location and the machine); Although most of these products are equipped with handles, they are not as convenient for long-term transportation in the hands as cases (see below). But among the advantages of the boxes, it is worth mentioning good capacity and fair...ly reliable protection of the instrument from contact with surrounding objects and adverse influences (dust and moisture). And some models even have the shape of a chair, both for resting the master and for use as a small stepladder.

- Case. Like the boxes described on top, cases are containers made of rigid materials, but the design of these containers differs significantly. Externally, the classic case resembles a suitcase, has a small height, when opened, it folds out lengthwise into two halves (some models can be conveniently opened regardless of which half the product is on top), and the carrying handle, which is a mandatory element of the case design, is not located on top, and on the side end. Thanks to this handle arrangement and flat shape, the cases are very convenient to carry in your hands; this is the option preferred by many craftsmen who often have to move from place to place. Among the disadvantages of such models, one can only note that they are unsuitable for large-sized tools - due to the aforementioned small thickness.

— Organizer. Organizers are containers for tools, the internal space of which is small in height and divided by partitions into separate cells (compartments). Most of these models are similar in design to the cases described on top (in particular, they open in a similar way and have a characteristic carrying handle), but there are other options - for example, a cabinet with several pull-out sections mounted on top of each other. The cells are small in size, making the organizers excellent for storing small fasteners (bolts and nuts, screws, etc.), as well as tool accessories (such as sockets or bits). However, in most cases, the size of the compartments can be changed (see below for more details), which allows you to store larger items such as a screwdriver, pliers or even an adjustable wrench in such a container. Note that organizers can be useful not only to owners of hand tools, but also to anyone who has to deal with an abundance of small items - in particular, seamstresses and fishermen.

- Tray. Trays are open fixtures; some of them look like boxes without a cover, some look like flat trays with recesses for tools. In any case, such devices are not designed for long-term transportation of the tool in the hands - and some have no handles at all and are intended to be permanently in one place (for example, on a shelf in the workshop). The degree of protection provided by the trays is also low due to the open design; their main advantage is the ability to quickly access content.

- Bag. Externally, tool bags tend to look similar to regular sports bags - most have a distinctive pair of handles and a shoulder strap (see below). Such products combine the advantages of boxes and cases: on the one hand, they are quite roomy and suitable even for large-sized items, on the other hand, they are easy to carry and are much better suited than boxes for frequent travel on foot or by public transport. The main disadvantage of bags is that they are made of soft fabric, which is poorly suited for carrying heavy tools and does not provide the same degree of protection as metal or plastic. However, many models provide a built-in rigid frame that corrects the situation.

- Backpack. Modern backpacks for tools are similar in appearance to classic backpacks for “urban” purposes (similar to how the “tool” bags described on top are similar to ordinary ones), but inside they have special devices for placing tools, and are also often equipped with a frame of increased rigidity, necessary for carrying massive items. The advantage of this type over bags is that a backpack worn by both straps leaves your hands free, and in general, carrying it on your shoulders is less tiring than in your hands. On the other hand, it takes longer to get to the tool in your backpack.

— Belt bag (holster). This name includes various devices for carrying tools on a belt. This can be either a separate bag that attaches to any more or less suitable belt, or a belt with several of its own bags for tools. A “holster” is an open type belt bag without a flap covering it on top. It can also be carried out separately or equipped with its own belt (often there are several holsters on one belt). The open design allows you to quickly remove and hide the tool, however, such bags are less reliable than closed ones - the contents may fall out if turned over. In general, regardless of type, fanny packs are great for situations where you need to constantly move, keep your hands free and at the same time always have certain tools nearby. One example of such an application is work at heights. Vests/aprons have similar specifics (see below); They are more spacious, but the belt is easier to choose in size.

— Vest (apron). A device in the form of a piece of clothing - most often a vest, but aprons are also found. In any case, such a piece of clothing has pockets, loops and other “seats” for various tools, and is also made of durable materials that can easily carry the significant weight of worn equipment. Vests and aprons are convenient primarily in situations where you need to constantly have a significant number of tools on hand, and other types of containers are inconvenient or impossible to use. An example is installation work at high altitudes (some vests are even called “installer’s vest”). The belt bags described on top have a similar purpose; At the same time, vests/aprons are more bulky and require more careful selection in size, but their capacity is much higher.

— Soft case (organizer). A device in the form of a piece of durable fabric (usually rectangular) with pockets and sockets for tools sewn onto it. For storage/carrying, such fabric can be folded “tools inward” and secured with a special fastener, and if necessary, the cover can be quickly unrolled. The similarity with organizers is that such products often have many small spaces for small items. In general, from a practical point of view, cases are somewhat inferior to boxes in terms of protection, but with similar capacity they are lighter and more compact.

- Cart. Carts are containers equipped with wheels and handles for easy transportation. It only makes sense to use transport on wheels for large sets of tools that would be too heavy and inconvenient to carry in your hands or on yourself. Therefore, the carts are large in size and have a large capacity, and their working volume is divided into separate sections - most often retractable - otherwise it would be impossible to properly accommodate the entire tool. The main place of use of such containers is large workshops, hangars and other similar facilities, where an extensive arsenal of tools must often be moved over short distances; Carts are not suitable for “serious” transportation (unless you secure such a device in the back of a truck).

The number of individual boxes or bags included in the delivery. The larger the set, the more tools you can load into them and the more space you will need to place them. In most modern sets of boxes and bags, this number is 2 – 3, which is quite enough.

The type of tool for which the container is normally intended.

— For hand tools. Products intended primarily for hand tools - hammers, screwdrivers, pliers, etc. Such tools are relatively small in size and, most often, of a standard shape; so for such boxes there is no point in specifying compatibility (see below). Note that such products are not suitable for small items - so if you plan to work with a large amount of “small things”, it is worth finding a container that was originally designed for this (see below).

— For tools and small items. Containers designed for both hand tools (see above) and for storing a large number of small parts. The specific design of such products may vary. Thus, in classic boxes (see “Type”), a cover with an organizer is most often provided for small items (see below); individual organizers for this purpose have compartments of different sizes; Vests and belt bags differ in size, respectively, pockets, etc.

— Only for small elements. Containers intended only for small parts - fasteners (bolts, nuts, screws, nails), some types of working attachments (drills, bits), etc. The vast majority of such containers are classified as organizers (see “Type”), although there are and exceptions.

— For power tools. Containers for this purpose are characterized by a high degree of...specialization; they are usually made for specific models of power tools (see “Compatibility”). This is due to the fact that similar instruments (even of similar purpose and level) differ markedly in the general structure and arrangement of various structural elements. And even if compatibility for such a container is not indicated, most likely it is intended at least for equipment from a certain brand.

The main size of the container for tools. Inches are traditionally used for this designation, and the length is usually indicated as the main size. This information allows you to evaluate the "weight category" of the product as a whole, as well as to determine whether it is suitable for a particular instrument of large sizes. At the same time, the characteristics usually indicate the overall dimensions on all three main sides (in millimetres), however, it is more convenient for many craftsmen to use the size designation in inches.

For kits (see below), this paragraph indicates the dimensions of all containers supplied in the kit.

Design of movable sections mounted in a tool box or other container. A section is a separate movable unit, usually divided into several compartments (see above). The meaning of such blocks is to ensure the compactness of the container when folded and the convenience of access to the contents when unfolded. The types of sections can be as follows:

— Sliding. Sections located at the top of the container and also playing the role of a cover for its lower part. Typically, such sections are made in pairs or quadruples, 2 pairs each, and when opened, in accordance with the name, they diverge in different directions, allowing you to get to the space below them. This variety is found mainly in boxes (see "Type").

— Retractable. Sections that slide out of the inner volume of the container are like drawers in a desk or kitchen table. This design is used in organizers and trolleys(see "Type").

Availability of a built-in organizer in the lid of the tool container.

The features of organizers are described in detail in paragraph “Type”; this type differs only in that it is built into the lid, and not made as a separate device. The combination of a box or case with an organizer allows you to conveniently store both large tools and small items such as fasteners or replaceable attachments in one container: the main volume is well suited for the former, the latter is convenient to keep in small cells of the organizer.

The number of individual cells provided in the organizer. In this case, we can talk about an organizer as a separate device (see "Type"), or a set of cells built into the lid of the box (see "Lid with an organizer"). And for solutions with removable partitions, in which cells can be combined, the maximum number is indicated — with all installed partitions.

Organizers, by definition, are designed mainly for small things. Therefore, the more cells there are, the more varieties of small items can be stored in a container. For example, in 10 cells you can keep bolts of five different sizes and separately nuts for them. Such a number of compartments — up to 10 — is generally considered small, but in fact it is often quite enough. 11 – 20 cells can be called an average, and the most capacious organizers have up to 30 compartments. However it is worth considering that with the same dimensions of the container, an increase in the number of cells leads to a decrease in their volume.

Possibility to change the size of the compartments provided in the tool box. This function is mainly used in organizers(see "Type"). Usually, the partitions in such products (all, or at least most) can be removed and rearranged, thus adjusting the size, number and even shape of the compartments — for example, to provide enough space for a relatively large tool like a screwdriver or pliers. Another option is bags and backpacks(see ibid.), in which individual compartments can grow and shrink through the use of zippers or zip ties. Here the meaning of this function is somewhat different: it is aimed at optimizing the use of internal space depending on the amount of content. For example, if there is little content, a bag or backpack can be “squeezed” so that things do not hang around the cabin; and when an additional load appears, loosen the ties or unzip, providing the necessary volume.

The presence of a removable tray in the design of the container for tools (usually a box — see "Type").

The tray is an open platform — usually with recesses for easy placement of tools. On such a platform, you can lay out the items necessary for work, so that each time you do not climb deep into the box behind them; this is especially useful when tools need to be changed frequently during operation. And after hours, the tray is loaded into the box along with the tools, usually to the very bottom; in some models, the design of this “second bottom” is such that it can be quickly removed along with the entire contents of the box.