United Kingdom
Catalog   /   Computing   /   Components   /   Hard Drives

Comparison Seagate Maxtor M3 Portable STSHX-M401TCBM 4 TB vs Seagate Backup Plus Hub STEL4000200 4 TB

Add to comparison
Seagate Maxtor M3 Portable STSHX-M401TCBM 4 TB
Seagate Backup Plus Hub STEL4000200 4 TB
Seagate Maxtor M3 Portable STSHX-M401TCBM 4 TBSeagate Backup Plus Hub STEL4000200 4 TB
from $144.44 up to $154.20
Outdated Product
from £94.51 
Outdated Product
TOP sellers
Placementexternalexternal
TypeHDDHDD
FeaturespCpC
Size4000 GB4000 GB
Form factor2.5 "3.5 "
Manufacturer's warranty3 years2 years
Connection
Interface
USB 3.2 gen1
USB 3.2 gen1
Technical specs
RPM5400 rpm
General
Power source (external)USB portpSU
Materialplasticplastic
Size82x118x20 mm198x118x41 mm
Weight236 g1060 g
Color
Added to E-Catalogmarch 2017october 2016

Form factor

The form factor in which the hard drive is made.

This indicator determines primarily the size of the device. But its more specific meaning depends on the execution (see the relevant paragraph). So, in the case of external drives, only the overall dimensions of the case depend on the form factor, and then quite approximately. But internal HDDs are installed in slots with a well-defined size and location of holes for fasteners; these holes are made specifically for one form factor or another. For desktop PCs, the standard form factor is 3.5", for laptops — 2.5" ; at the same time, there has been a recent trend in desktops towards miniaturization and the transition to 2.5-inch drives. Theoretically, there is an even smaller form factor — 1.8", but in fact it is used mainly among ultra-compact external HDDs.

Manufacturer's warranty

Manufacturer's warranty provided for this model.

In fact, this is the minimum service life promised by the manufacturer, subject to the rules of operation. Most often, the actual service life of the device is much longer than the guaranteed one.

RPM

For drives used in a PC (see "Intended use"), 5400 rpm(normal) and 7200 rpm(high) are considered standard speeds. There are also more specific options, including models with the ability to adjust the speed depending on the load. In server HDDs, in turn, higher speeds can be used — 10,000 rpm and even 15,000 rpm.

Power source (external)

USB port. Powering an external hard drive directly through the USB connector used to connect to a computer. The advantage of such disks is that they do not require a separate power supply — thus, they can be used even with laptops in the absence of an electrical outlet. However, it is worth considering that the power of the current supplied through the USB connector may sometimes not be enough to start the disc — especially if the connection is made through a USB hub at the same time as several other devices.

— Thunderbolt. Powered directly through the Thunderbolt connector — the same one used for the main connection. For more information about the connector itself, see “Connection Interfaces”, otherwise this option is completely similar to the USB power supply described above (adjusted for the fact that Thunderbolt does not use hubs).

Power supply. Power supply of an external drive from a separate unit connected to a standard 220V network. Such drives may have a connection interface other than USB, are free from problems associated with insufficient power supply, but their mobility is limited by the availability of electrical outlets.
Seagate Maxtor M3 Portable often compared