Comparison Tramp Bike 2 vs Terra Incognita SkyLine 2

Seasons in which the use of a tent is allowed.

There are three main seasonality options: winter, spring / autumn and summer. At the same time, the design features necessary for comfortable use of the tent in different seasons are as follows:

— In winter, the tent should effectively protect against snow and wind, and its materials and fittings should normally endure a long stay in the cold. Thermal insulation is also desirable, but in general this is a secondary factor — the main insulation is provided primarily by clothing, a sleeping bag and a bed.
— In the off-season — in spring and autumn — protection from rain, which can be accompanied by strong winds, is of particular importance.
— For comfortable use in the summer heat, good ventilation is required, ideally with insect protection, such as mosquito nets.

As you can see, these requirements generally do not contradict each other and may well be combined in one product. Thus, there are very few tents on the market designed strictly for one season — two- or even all-season options are much more common. For example, even among beach tents (see "Purpose") there are models for which the possibility of using in the off-season is claimed — for this, the design provides for a dense awning, or even the ability to completely close the tent. Almost any model from the "spring-autumn" series...additionally has a summer specialization; and most models suitable for winter actually allow year-round use.

In conclusion, we recall that tents with the same seasonality and purpose can at the same time differ significantly in characteristics and design features.

The total weight of the tent is including the frame and other accessories.

This parameter depends primarily on the purpose (see above), and after that — on seasonality, capacity, and additional functions. For example, in trekking and expedition models, the weight usually does not exceed 5 – 7.5 kg, and the lightest of these products can weigh 2 – 3 kg or even less, while being full-fledged tents for 2 people or even more. However, for a trekking tent, such a small weight with a capacity of more than 2 people usually means that this model is designed exclusively for the summer. For most camping tents, the weight starts at 6 kg, although among them there are also quite light products — by 4 – 5 kg, 3 – 4 kg, or even less (in such cases, light weight can also mean a purely summer specialization). And the most capacious and/or multifunctional models can have a weight of 10 – 15 kg, 15 – 20 kg and even more; in this weight category, you can mainly find tents, camping tents for many people and fishing tents for carp fishing (see "Destination").

When choosing a tent according to this indicator, it is worth considering that it does not always make sense to chase the maximum weight reduction. Yes, the...light tent is the most convenient to carry; on the other hand, weight reduction inevitably affects one or several other characteristics at once. So, most often, lighter models are either more expensive or smaller in size and less roomy and functional than their heavier counterparts. And sometimes weight reduction also negatively affects the security (including moisture resistance) and the overall reliability of the product. Therefore, it makes sense to specifically look for the lightest tent possible in cases where weight reduction is of key importance; a typical example is long trips, in which all the equipment has to be carried “on oneself” for a long time. And even in such cases, it is worth remembering other important characteristics. For example, for use in late autumn, when frosts are likely, it is better to choose a heavier tent with winter seasonality than a light model that is not designed for winter conditions.

— Hemisphere. Tents with a frame of two (sometimes more) crossed arches. The main advantage of such a case is good resistance to wind. On the other hand, the interior space of the hemispheres is relatively small.

— Half -shell. In cross section, the semi-barrel has the shape of a half circle (or more or less similar), and its frame consists of several semicircular arcs arranged in parallel. This provides a good internal volume, but the wind resistance of this type of hull is lower than that of hemispheres (which, however, is not critical in conditions of plains and low mountains, where there are no storm winds).

— Shatrovaya. In such a case, one rack is used, located in the middle, and the tent itself has the shape of a pyramid or cone. The advantage of tents is their high height, the disadvantage is the inconvenience due to the presence of a rack inside the living space and poor resistance to wind. This form is quite rare.

— Double. The upper part of such a body is a rib, from which two sides of the awning (slopes) diverge at an angle. To create this shape, two internal supports are usually used at the ends of the tent. This design provides additional water resistance, because. the awning is located at a large angle to the drops falling from above; at the same time, due to the inconvenience created by the...supports located inside, and a number of other features, such tents are very rare.

— Cube. A hull shape found only in fishing tents (see "Intended Use"). Almost all such models are intended for winter use and ice fishing. At the same time, some of them do not have a bottom or are equipped with a hole in the bottom, which allows you to install an awning directly above the hole; others are closed from all sides, including from below, and fishing is supposed to be through the opening. However, among the cubic tents there are also demi-season/summer models, including advanced solutions for carp fishing.

The vestibule is a kind of "entrance hall" in front of the entrance to the main compartment (s) of the tent.

The specific design and purpose of such a "hallway" may be different. So, in small two-layer tents, the space between the inner and outer layers in front of the entrance plays the role of a vestibule (for this, the outer canopy is stretched at a greater angle relative to the vertical than the inner one). The dimensions of such a compartment are small, it is designed mainly for storing individual items, such as shoes. In larger models, the vestibule is made in the form of a full-fledged compartment, which differs from the main compartment only in the absence of a bottom (although there are exceptions). Such a compartment can be located between two sleeping compartments; and in some tents two vestibules are provided at once.

Anyway, such equipment increases the useful area of \u200b\u200bthe tent and provides additional comfort when using it. Tambour can be used to store equipment, often quite bulky; with an open entrance, it provides additional protection for the main volume of the tent from rain, sun and wind; and in a large vestibule(150 cm long or more), you can even organize additional sleeping places (if the weather permits) or even an auxiliary room such as a kitchen, dining room, administrative area, etc. " below.

An option for double-layer tents with an internal mesh awning. In fact, such a mesh protects the space of the main tent from mosquitoes and other insects, and when installed without an external awning, you can enjoy the view of the starry sky in warm, cloudless weather.

This paragraph refers to the total number of entrances to the tent. In most cases, their number also describes the possibility of entering the sleeping area. However, there are models with a large vestibule, in which the input is provided from different sides. Such abundant entry/exit options allow the tent to be used in a variety of situations. For example, focusing on the position of the sun, it will be relevant to open the western or eastern side; landscape conditions will not interfere with the installation of a tent, since one of the exits will remain accessible in any case. Well, for a large company at the campsite, vacationers will not interfere with each other.

The number of entrances to the bedroom provided in the design of the tent.

It is worth clarifying that if there are several bedrooms in the design (see "Bedrooms"), then in this case, not the total number of entrances is taken into account, but the number of entrances per bedroom. For example, if a tent has 2 bedrooms, each with 1 entrance, then the specifications will show 1 entrance to the bedroom.

In other words, if the design declares 2 entrances to the bedroom, this means that there are two exits from each bedroom (regardless of the total number of bedrooms). This design is convenient primarily because it is possible to leave the sleeping compartment, if necessary, in the most convenient way, without disturbing the sleeping neighbors once again. .

The number of poles provided in the frame of the tent. For hemispherical types (see "Shape") for 2-3 people, not intended for extreme conditions, 2 poles are considered quite sufficient; larger and/or reinforced models may have more poles. In the case of half-barrels, this amount is directly related to the length of the tent.

— Nylon. Synthetic material with good water resistance and average characteristics in terms of strength and resistance to negative influences: quite main function light weather conditions, however, when wet, it loses some strength (tends to stretch), and is also sensitive to prolonged exposure to ultraviolet radiation. As a result, it is used relatively rarely.

— Polyester. It also refers to synthetic materials, it is considered a slightly more advanced option than nylon: it withstands wetting and heating well, is less sensitive to ultraviolet radiation, and as a result, it has greater durability. At the moment it is the most popular material for awnings.

— Polyamide. The general name for some varieties of synthetic fabrics, including, in particular, nylon and nylon described above. The properties of polyamides are similar to nylon: on the one hand, low cost, resistance to moisture and abrasion, as well as strength, on the other hand, a tendency to stretch when wet and loss of strength when exposed to UV radiation

— Polycotton. A material that combines cotton with synthetic fibers (usually polyester), usually in a ratio of 1:2 (synthetic-cotton). This combination provides durability, resistance to adverse conditions, polycotton resists moisture well and at the same time “breathes”. It's also better than pure synthetics at keeping you cool on a hot day and warm on a cold day. At the same time, this material is quite heavy and expensive, which is...why it is rarely used and only in camping tents (see "Purpose").

— Polyurethane. Typically, this refers to a polyurethane coating applied to a synthetic polyester or nylon backing. The main function of such a coating is to improve the water resistance of the awning (see below). However, the specific values of water resistance in different models can vary markedly. The base material (and, accordingly, the main features of the awning) usually depends on the price category of the tent.

— Polyethylene. Polyethylene is absolutely waterproof, but it also does not let air through. As a result, this material is found exclusively in tents (see "Destination").

— Texit membrane. A variety of high-quality membrane fabrics, combining, on the one hand, high water resistance values (10,000 mm Hg and above), on the other hand, the ability to "breathe" and let water vapor through, which contributes to thermoregulation and maintaining a comfortable climate in the tent. However, this material is expensive, and therefore it is used only in high-end expeditionary equipment.

— Cotton. Natural cotton, usually, with nylon or polyester rip-stop threads, as well as additional water-repellent impregnation. This material is durable, reliable and at the same time passes air well and provides convenient thermoregulation, keeping cool in hot weather and warm in cold weather. Its disadvantages are the high cost and rather large weight, which limits the use of cotton for advanced models of camping tents.