Dark mode
United Kingdom
Catalog   /   Automotive   /   Car Audio   /   Car Subwoofers

Comparison Kicx STQ 300 vs Kenwood KFC-W3013PS

Add to comparison
Kicx STQ 300
Kenwood KFC-W3013PS
Kicx STQ 300Kenwood KFC-W3013PS
from $61.00 up to $78.96
Outdated Product
from $76.80 up to $84.48
Outdated Product
TOP sellers
Application areacarcar
Designwithout bodywithout body
Typepassivepassive
Size12" (30 cm)12" (30 cm)
Tech specs
Rated power400 W400 W
Max. power800 W800 W
Frequency range30 – 1800 Hz34 – 300 Hz
Sensitivity87 dB85 dB
Dual voice coil
Impedance4 ohm4 ohm
Resonant frequency30 Hz25 Hz
General
Diffuser materialpolypropylenepolypropylene
Woofer Diameter300 mm300 mm
Woofer depth155 mm153 mm
Weight5.4 kg6.3 kg
Added to E-Catalogjuly 2012july 2012

Frequency range

The range of audio frequencies reproduced by the subwoofer. It is believed that the human ear is capable of perceiving a frequency range of the order of 16 – 20,000 Hz, but in this case note that the subwoofer is designed to reproduce the lower frequency band (up to 200 Hz). Accordingly, in the case of the lower limit of the range, everything is simple: “the lower, the better”; the upper one should not be lower than the lower limit of the main car audio — otherwise there will be "gaps" in the frequencies, which will affect the sound quality.

Sensitivity

Sensitivity determines the loudness of the subwoofer when a signal of a certain power is connected to it: with equal signal power and impedance (see below), the subwoofer with the higher sensitivity will sound louder.

Dual voice coil

A dual voice coil is actually two separate voice coils on the same speaker. This allows you to connect two amplifiers to the subwoofer at once, thus providing high sound power.

Resonant frequency

The natural frequency of the cone in the subwoofer speaker, namely the frequency with which the cone will oscillate if the speaker is suspended freely in the air and a single impulse is transmitted to the cone (for example, by clicking on it with your finger). In subwoofers, this parameter determines, in particular, the lower limit of the frequency range (see above): at frequencies below the resonant sound power drops sharply. Accordingly, for deep rich bass, the resonant frequency should be as low as possible. This parameter is also used to calculate the size of the enclosure for the subwoofer.

Woofer depth

The size of the main subwoofer speaker from the front (usually the frame protruding beyond the diffuser) to the rear edge (where the magnet is usually located). In practice, it matters when selecting enclosures for frameless models, as well as when installing Free Air (see "Design"): this is the depth to which the speaker will be "recessed" into the enclosure or trunk. And a flat subwoofer will not always produce less bass than its more voluminous counterpart.
Kicx STQ 300 often compared
Kenwood KFC-W3013PS often compared