Comparison B&W 702 S2 vs B&W CM10 S2

Clear Table
Add to comparison
	B&W 702 S2	B&W CM10 S2
	from £3,499.00 Outdated Product	from $3,990.00 up to $4,309.20 Outdated Product
all specs only differences
TOP sellers	Find prices on Amazon.uk Find prices on eBay.uk	Find prices on Amazon.uk Find prices on eBay.uk
Features	homemade	homemade
Mount	floor	floor
Specs
Type	passive	passive
Number of channels	kit 2.0	kit 2.0
Number of speakers	5	5
Number of bands	3	3
Sensitivity	90 dB	90 dB
Impedance	8 Ohm	8 Ohm
Crossover frequency		0.35 / 4 kHz
Power / frequency
Maximum amplifier power	300 W /minimum — 30 W/	300 W /per channel, minimum - 30 W/
Overall frequency range	45 – 28000 Hz /± 3 дБ/	45 – 28000 Hz
Design
Design features	bass reflex Bi-Amping/Bi-Wiring	bass reflex Bi-Amping/Bi-Wiring
General
Tweeter size	25 mm	25 mm
Midrange speaker size	150 mm	150 mm
Woofer size (LF/MF)	165 mm	165 mm
Finishing material	MDF	MDF
Front speaker dimensions (HxWxD)	109х37х36 cm	109х36х36 cm
Weight	59 kg	67 kg
Color
Added to E-Catalog	september 2017	october 2015

Crossover frequency

The frequency of the crossover provided in the speaker design.

The crossover is installed exclusively in the model with several stripes (see "Number of stripes"). This is an electronic filter that separates the incoming audio signal into separate frequency bands and directs each band to its "own" set of speakers. And the crossover frequency shows where the border between these ranges passes. If there are more than two bands, then there will be several similar boundaries: for example, for a four-band system, “0.15 / 0.8 / 2.8 kHz” or “0.12 / 1 / 3.8” may be indicated.

In most cases, this parameter is mainly of reference value: the built-in crossover frequencies are selected according to the performance of the speakers installed in the speaker.

Weight

The total weight of all components of the speaker system.