Comparison Ezviz CS-CV246-A0-3B1WFR vs Ezviz C6T

-LAN. The LAN (Ethernet) interface was originally intended for building wired computer networks. Cameras with this connector, usually, also work as network devices. The advantage of this option over the Wi-Fi described below can be called a higher actual bandwidth, over BNC — the ability to connect without additional equipment, directly to a standard network router used for a regular computer network. Of the shortcomings, one can only note the need to pull the wire, but this point is common to all wired connection options. For the rest of the features, LAN is the most convenient, thanks to which it has become widely used in modern security cameras.

— Wi-Fi. The Wi-Fi connection was originally a wireless analogue of the LAN described above and was used to connect to computer networks. When working in such networks, this connection is similar to LAN in the sense that it allows the camera to work through a regular router (of course, supporting Wi-Fi). At the same time, Wi-Fi is more convenient due to the lack of wires, however, with an abundance of other wireless devices connected to the router, the channel bandwidth and image quality can noticeably deteriorate. Note that recently it is also possible to use this connection in the Direct mode — for direct connection of the camera with another device, for example, connecting the camera to a smartphone (see "Design and...capabilities — P2P"). However, this option is less common.

— BNC. Abbreviation for Bayonet Neill Concelman. A bayonet type connector commonly used for analogue video signal transmission. Refers to professional video interfaces, special equipment is required to work with such a camera. However, by themselves cameras with connectors of this type, usually, belong to the lower price range. This is due to limited connectivity via BNC — only a video signal can be transmitted through it, which limits the functionality of such cameras compared to models that work via LAN or Wi-Fi (see above).

— 3G / 4G. Internet connection via 3G / 4G mobile networks; usually, for this you need to install a SIM card from a mobile operator in the camera. The speed of such networks allows, among other things, to broadcast video in a fairly high resolution. So such a connection (of course, with coverage) is well suited not only as a fallback in case of interruptions to the Internet, but also as the main communication channel if there is no fixed Internet connection at all. A typical example of the second situation is the observation of a country house located "far from civilization", but in the zone of reliable mobile communication reception. Moreover, in both cases, you can contact the camera via the Internet from anywhere in the world.

— PTZ (controlled). PTZ is an abbreviation for camera control capabilities - “pan, tilt, zoom”. Accordingly, cameras with this feature are equipped with a movable lens that allows you to aim at the desired object; but the magnification can be either optical (see below) or digital. The advantages of PTZ cameras are obvious: their view is not limited to one position, it can be adjusted at the operator’s request. And some models may provide advanced functions, such as automatic targeting and focusing on movement. On the other hand, similar systems cost accordingly.

- Private mode. A feature that allows you to temporarily pause the camera to protect the privacy of people in its field of view. In private mode, the camera temporarily stops recording video, broadcasting images, and performing other actions related to video surveillance. It is important to note that the implementation of private zones or temporary disabling of recording is available in almost any video surveillance camera. In this case, we are not talking about software capabilities, but about creating conditions in which the camera cannot physically record. So, some models hide the lens inside the body, others turn their “look” away in a predetermined direction (for example, to the corner of a wall). Private mode can be activated forcibly (by pressing a button on the camera body or in a mobile application) or according to a preset schedule.

— PoE power supply. Power technology used in cameras with wired LAN connections. The PoE function allows you to supply power to such a camera through the same cable that is used to transmit the signal - this eliminates the need to run an additional wire to the outlet or use batteries/rechargeable batteries. Of course, to use this technology, the connector of the recorder (or other device) to which the camera is connected must also support it. But it’s worth considering that there are different PoE standards, which primarily differ in power (802.3af power up to 13 W, PoE 802.3at - 25.5 W).

— PoC power supply. An analogue of PoE technology used in traditional cameras: it allows you to supply power through the same cable that is used for the video signal, and thus do without connecting to an outlet and without batteries/batteries. The difference is that PoC operates over a coaxial cable with a BNC connector. Of course, to use this function it must be provided both in the camera itself and in the recorder.

— Panoramic shooting. This feature means that the camera has multiple lenses and covers a horizontal angle of at least 180°, providing a wide field of view when the body is stationary. Such a field of view can be achieved with one fisheye lens (see the corresponding paragraph); however, panoramic shooting has one important advantage: the level of distortion in such video is much lower, even at the edges. On the other hand, the presence of several “eyes” has a corresponding impact on the price and dimensions.

— Setting up a region of interest (ROI). This function allows you to define individual zones in the camera's field of view. Note that the tasks of the selected areas may be different. One option is to configure motion detection zones in the frame, which can reduce the level of false alarms. The second possible implementation is to reduce the quality of less important areas of the image to save storage space. The latter can be especially useful when there is a shortage of data storage capacity, and also if the camera uses communication channels with limited speed or traffic volumes (for example, a 3G/LTE mobile network). Either way, the Region of Interest (ROI) feature reduces camera strain and lets you focus on what's important to you first.

- Light sensor. The presence of a light sensor in the camera design. As a rule, this sensor is used to determine the characteristics of the surrounding environment and automatically adjust to its characteristics - in particular, switching between day and night modes, turning on IR illumination (see below), etc.

— Motion detection. Cameras with this feature are able to detect movement in the field of view. This function is convenient because the vast majority of situations that need to be recorded during video surveillance are associated with movement in the frame. The specific reaction to movement may be different: in some models, recording is turned on, others also send a notification to the recorder or other device, others are able to turn after a moving object, etc. Cameras with this function are especially convenient for monitoring objects where movement is rare - for example, warehouses or underground parking lots at night: for example, turning on motion-based recording only saves storage space and makes it easier to view footage.

— Sound detection. Function for detecting sounds in a protected area. Having “heard” a sufficiently loud sound, a camera with this function can react in one way or another: start recording, sound a warning or alarm, etc. Some models can even play the role of acoustic break sensors, accurately detecting a characteristic impact on the glass and the sound of shrapnel. Support for audio detection automatically means the presence of a microphone (see the corresponding paragraph).

— Microphone. The presence of a microphone in the camera design allows it to record not only the image, but also the sound. This allows you to get a more complete picture of what is happening when recording. In addition, a microphone can be useful if the person in front of the camera wants to communicate something to the operator, and if there is a feedback speaker (see below), even a full dialogue is possible.

— Feedback speaker. The camera has its own built-in speaker. One of the most popular uses of this feature is indicated in the name - it is the operator’s feedback from people near the camera. Thanks to the speaker, you can, for example, voice directly through the camera a hint for a lost visitor, a warning or order for an intruder, etc. In addition, this function can be used for other purposes - in particular, to generate an alarm.

- Mobile app. The ability to work with the camera through an application installed on a gadget such as a smartphone or tablet. As a rule, this control method gives access to both broadcasting/saving video and most settings; but the specifics of the communication between the gadget and the camera may be different. Thus, modern applications often provide for the possibility of remote access via the Internet from anywhere in the world; however, there is another option - a direct communication (usually via Wi-Fi), which only works in the immediate vicinity of the camera. These nuances should be clarified separately. Be that as it may, the mobile application is convenient in that it can be installed on almost any modern smartphone or tablet running Android or iOS, turning the gadget into a portable camera control station.

— Motion alert. A function found in cameras with motion detectors (see above). When motion is detected in the frame, such models are capable of not only taking their own actions (for example, turning on recording), but also sending notifications to the user in one way or another. Specific methods for transmitting alerts may be different - email, SMS, notification on a special web page, etc. But in any case, this function makes it easier to track the observed object and reduces the risk of missing an important event in the frame.

— Alarm input/output. As a rule, cameras with this function are equipped with both inputs and outputs; the number of both may be more than one. These connectors are used to transmit control signals to various components of the security system; they allow you to build a very advanced system and provide additional capabilities for managing its functions. Thus, alarm inputs allow the camera to “react” to commands from other elements - for example, turn on when an electronic lock on the door is triggered. And the outputs, accordingly, are used to transmit commands to external devices - for example, to turn on the spotlight when motion is detected in the frame.

— Audio input/output. The presence of audio input and/or output in the camera design. This feature makes it possible to work with sound, but the features of this work may vary, depending on the specific set of connectors. The audio input itself makes it possible to connect an external microphone, and the audio output allows you to output sound to an external device (for example, a recorder or an amplifier with speakers) via a separate channel. At the same time, these connectors can be used one at a time. For example, a camera with a built-in microphone may only have an audio output, but a model with a LAN or Wi-Fi communication is capable of transmitting an audio signal through the same channel, and for such cameras an audio input is sufficient.

— IR illumination. The presence of an infrared illumination system in the camera design. This illumination is used for operation in night mode: IR illumination is invisible to the naked eye (you can only notice a faint reddish glow of the backlight LEDs, and even then not always), but is well perceived by the matrices of modern surveillance cameras. The ability to do without visible light sources is convenient for a number of reasons: in particular, such work hardly reveals the camera.

— LED backlight. The camera has an LED backlight. Like the infrared illumination described above, this backlight is designed to work in the dark; however, it provides light that is visible to the human eye, allowing the camera to produce a relatively natural-looking color image.

- Card reader. A device for reading removable memory cards, usually standard SD or microSD (specific types of supported cards should be clarified separately). This device performs two main functions. Firstly, it allows you to equip the camera with its own drive - this provides an additional guarantee in case of failures in the external recorder and even allows you to record without any additional equipment at all. Secondly, memory cards allow you to conveniently exchange data with laptops, PCs and other external devices - first of all, transfer footage onto them.

The size of the matrix installed in the surveillance camera (diagonally).

In general, larger sensors (with the same resolution and sensor type) are considered more advanced: they get more light, which has a positive effect on image quality (especially in low light). On the other hand, increasing the size affects the cost of the entire device; and in some cases (for example, if the camera is not planned to be used in twilight and darkness), a relatively small sensor may be quite suitable.

As for specific dimensions, the most modest cameras in terms of this indicator have matrices of 1/4 "or less. Models with sensors of 1/3.8" - 1/3" and 1/2.9" - 1/2" are very popular, these values can be called average. And in advanced devices, diagonals and more than 1/2 "(up to 1/1.7") are found.

Camera sensor resolution in megapixels (millions of pixels).

The higher the resolution of the matrix, the higher the video resolution can be (see below), the more detailed the image is capable of providing the camera. At the same time, note that as the number of megapixels increases (without changing the size of the matrix), the size of each individual pixel decreases, which increases the likelihood of noise and deterioration in the overall image quality. Therefore, high resolution in itself is not necessarily a sign of high quality — a lot depends on other things, for example, on the size of the matrix (see above).

As for specific values, in the most modest matrices it does not exceed 1.3 MP, which corresponds to the maximum HD resolution. 2 MP sensors allow for already Full HD resolution (usually 1920x1080 or 1600x1200), 3 MP, 4 MP, 5 MP and 6 MP are capable of better resolution, but still do not reach 4K, which is typical for 8 MP.

The maximum video resolution that the camera can capture.

The higher the resolution of the video, the more details you can see on it, the less details will be blurry. On the other hand, high resolution means large volumes of video materials, which, accordingly, requires capacious media for their storage and fast communication channels for broadcasting video in real time. Yes, and this indicator significantly affects the cost of the camera.

The maximum frame rate in the video captured by the camera.

The higher the frame rate, the clearer the image, the less noticeable blurring when moving in the frame (especially fast). On the other hand, this indicator affects the amount of information recorded during shooting, as well as the cost of the camera itself. Therefore, it makes sense to specifically look for a video surveillance camera with high-speed shooting(45 fps and higher) only if a clear recording of fast moving objects is important to you.

The lowest degree of illumination of the scene being shot, in which the camera is able to provide normal visibility. Usually, this item specifies the values for the daytime mode of operation (in the night mode, the minimum illumination in many models may be zero at all, because in such cases the IR illumination is turned on, see "Design and capabilities"). And if the camera is capable of shooting in colour, it usually means the lowest illumination necessary to obtain a colour image.

The lower this indicator, the better the camera works in low light, the brighter and more clearly visible image it is able to provide in such conditions. At the same time, note that in low light, night mode is often preferable, and in the presence of the aforementioned IR illumination, it is more likely to focus on the range of its operation (see above).

There are comparative tables that allow you to evaluate the degree of illumination indicated in the characteristics from a practical point of view: for example, an indicator of 0.2 lux corresponds to clear eyes on a full moon.

Aperture of the lens installed in the camera.

Aperture characterizes the degree of attenuation of the light flux when passing from the front lens of the lens to the matrix. It is denoted as the ratio of the diameter of the active aperture of the lens to the focal length, while the size of the active aperture is designated as f and is taken as a unit — for example, f / 1.4 or f / 2.0. Moreover, the smaller the number in the designation, the higher the aperture (in our example, the second lens will be darker than the first). And for lenses with a variable focal length (see "Focal"), the actual aperture, usually, changes with a change in focal length; for such models, either the range of aperture values, or its maximum value, can be indicated.

By itself, this parameter characterizes, first of all, how light the image taken through the lens turns out, all other things being equal. High values are important, first of all, when shooting in low light conditions: a fast lens allows you to get a fairly high-quality image without increasing the sensitivity of the matrix, which is fraught with noise and “blurring” of the picture. On the other hand, the actual quality of camera operation (including in dark conditions) also depends on many other factors — the type and size of the matrix, signal processing features, etc. Therefore, aperture in most cases is more of a reference than a practically significant parameter.

The signal-to-noise ratio that the surveillance camera corresponds to.

This indicator describes the ratio of the level of the useful signal (the actual image produced by the camera to an external device) to the level of extraneous noise that inevitably arises during the operation of electronic circuits. Such noise appears in the image as characteristic noise (“snow”). The higher the signal-to-noise ratio, the less interference on the screen, the clearer and better the image is, and the smaller the volume of recorded video files. It is believed that visible noise practically disappears at a ratio of at least 45 dB. However, among modern cameras there are also higher rates.