United Kingdom
Catalog   /   Automotive   /   Tyres & Rims   /   Tyres

Comparison Hankook Dynapro HP2 RA33 215/65 R16 98H vs Nexen Classe Premiere 672 215/65 R16 98H

Add to comparison
Hankook Dynapro HP2 RA33 215/65 R16 98H
Nexen Classe Premiere 672 215/65 R16 98H
Hankook Dynapro HP2 RA33 215/65 R16 98HNexen Classe Premiere 672 215/65 R16 98H
from £89.39 
Outdated Product
from £80.00 
Outdated Product
TOP sellers
Seasonsummerall season
Product Typepassenger car / SUVpassenger car / SUV
Width215 mm215 mm
Aspect ratio65 %65 %
Tyre inner diameter16 "16 "
Load index9898
Speed ratingHH
Orientationnon-directionalnon-directional
Pattern Symmetrysymmetricsymmetric
Fuel efficiencyC
Wet GripB
Noise Level70 dB
Added to E-Catalognovember 2013november 2012

Season

The time of the year the tyres are designed for.

Tyres designed for the warm season are called summer, for cold — respectively, winter (among the latter, studded and non-studded models are separated, see below for details). The need for separation by season is due to the fact that when the temperature drops, the rubber solidifies; therefore, cold weather requires softer tyres than warm weather. And the time when you need to change tyres is best determined by the average daily temperature: if it is above +5 °C, it is better to use summer tyres, if lower — winter ones. There are also more detailed recommendations regarding the time of changing tyres, they can be found in special sources.

Also note that there are tyres positioned as all-weather. Such models should be treated with some caution: they can be produced in countries where winters are very mild, without snow and severe frosts, and be designed specifically for such “all-season”; for a full-mean winter, such tyres may not be suitable. So the specific attributes of all-season tyres should be specified separately (including reviews). If there are no detailed info, such tyres are best considered as summer tyres with slightly increased resistance to cold, and if used in winter, then in simple conditions (for example, driving along well-cleaned city streets).

Fuel efficiency

The rolling resistance rating that the tyre corresponds to. The higher this figure, the lower the resistance, the less fuel is spent to overcome it and the more economical the tyre is. Efficiency indices are denoted by letters of the Latin alphabet in descending order of efficiency: A(highest efficiency), B, C, D, E, F, G(lowest efficiency).

With other things being equal, more economical tyres tend to cost more, but the difference is offset by fuel economy.

Wet Grip

An index that determines the overall performance of a tyre on wet pavement. Lettered from A(highest) to G(lowest); intermediate options, respectively — B, C, D, E and F.

The higher this indicator, the stronger the tyre grips to the wet road, the more efficient and safer it will be in difficult weather conditions. At the same time, it is worth noting that a low grip index does not mean unsuitability for driving in rain or snow — you just need to be more careful using such tyres. Conversely, a high index does not relieve the driver of the need to be careful in difficult weather conditions.

Noise Level

The average noise level created by a tyre while driving. The lower this indicator, the more comfortable this model will be, the less additional noise it will create.

Note that EU rules provide 3 categories of tyres in terms of noise. “Quiet” are considered models with an index of up to 68 dB, “medium” — 68 – 71 dB, “loud” — 72 dB and above.