Departure is the distance from the plane passing through the place where the wheel is attached to the hub, to the plane passing through the middle of the landing width. Positive overhang values mean that the hub is on the outside of the middle of the disc,
negative values mean that the hub is recessed "deep" into the wheel. For each car model, there is an individual departure value that is optimal for stability and controllability.
The type of disc determines the technology used in its production, which affects both the appearance and strength characteristics.
—
Cast. The production technology of alloy wheels gives a wide scope for a wide variety of design solutions. At the same time, however, such disks are prone to the appearance of microcracks due to wear, break under strong impacts and are difficult to repair.
—
Forged. The most durable and corrosion resistant disc type. The safest, because. withstand even very strong impacts without destruction. Their disadvantages are high cost and design limitations due to production technology. Against the background of high cost, manufacturers came up with a new type — something between forged and cast. A kind of
forged hybrid(Flow Forged, Flow Forming, Hybrid Forged), which is more durable than cast ones, but more budgetary than forged ones.
—
Forged (hybrid). Hybrid forging technology (from the English. "Hybrid Forged") involves the manufacture of alloy wheels under pressure. The result is lightweight wheels with an attractive design and precise geometry. At the same time, the structure of the Hybrid Forged metal approaches in terms of its strength characteristics to forged steel.
—
Teams. The composite disk consists of a forged rim and a cast "pla
...te" fastened together with titanium bolts. This allows you to combine the advantages of both technologies, but such disks are very expensive.
— Stamped. The cheapest and most common type of disk — usually, standard "factory" disks are of this type. In such discs, the rim and the disc itself are fastened together by welding. Usually made from steel. They are cheap, easy to repair, and also quite safe, since they most often deform upon impact without breaking. On the other hand, stamped discs are heavy, not very resistant to corrosion, and not very versatile in design.
