Comparison Makita M9203 vs Makita BO3710

The speed of rotation of the working attachment, which is capable of providing a grinder of the appropriate design (for example, angle — see "Type"). If the device has speed control, this paragraph shows the range of such adjustment, from minimum to maximum.

It makes sense to compare by this parameter units belonging to the same type and having the same maximum diameter of the disk (or other working nozzle). The latter is due to the fact that the larger the disk, the faster its edge moves (at the same speed); i.e. a larger diameter requires less RPM for the same performance/efficiency. In general, when comparing different models, the following should be taken into account. The higher rotation speed is well suited for large volumes of work (because it improves productivity) as well as for fine polishing with “delicate” nozzles. A lower setting, in turn, improves accuracy (reduces the chance of removing excess material), as well as provides more torque and allows you to more effectively deal with hard, stubborn materials. More detailed recommendations for different types of work and different nozzle diameters can be found in special sources; here we note that an increase in the rotation speed, usually, affects the cost of the machine compared to analogues (since this requires a more powerful engine). In addition, discs and other attachments may have maximum RPM limits.

The frequency of vibration of the working attachment, which is capable of providing a grinder of the appropriate design (a classic example is vibration, see "Type"). If the device has an oscillation frequency adjustment, this paragraph gives the range of such adjustment, from minimum to maximum.

A higher frequency (with the same amplitude — see below) improves overall performance, especially when working with hard, stubborn materials, and also contributes to efficiency in delicate finishing (such as polishing). In turn, a lower frequency reduces the likelihood of making a mistake by removing an excessive amount of material. There are also more specific points related to this parameter; them, as well as recommendations for choosing the frequency for different jobs, materials and types of sanding sheets, can be found in special sources. Here, we note that individual sanding sheets may have their own limitations or recommendations regarding the operating frequency.

The size of the sole provided in the tool.

This parameter is indicated for two types of grinders — most models with a vibrational principle of operation (namely, for vibration and delta grinders, as well as multifunctional ones), as well as belt units. For more information about both, see "Type", here we note that the sole as such is only available in vibrating tools — in tape tools, we are talking about the size of the section of the tape that is in direct contact with the material. Simply put, the size of the sole is the size of the working surface of the machine.

The larger the size of this surface, the more performant the machine, the better it is suitable for large volumes of work. And tape models, we recall, are used mainly for processing oblong parts and during operation they are usually located across such a part; so that for such machines it is highly desirable that the length of the tape be not less than the width of the surface to be treated — otherwise, accurate processing can be quite difficult. On the other hand, a large sole inevitably affects the dimensions, weight, and most often the cost of the tool, besides, it can make it difficult to use in cramped conditions. Yes, and consumables for such soles (sheets, tapes) require larger ones — and, accordingly, more expensive. So when choosing according to this indicator, it is worth considering the features of the intended application; if you wish, you can refer to special sources for detailed r...ecommendations on this matter.

Also note that for multifunctional models (see "Type") in this paragraph, several options are most often given — for each specific sole. However, there are models where only one set of sizes is indicated. This can either mean that both main vibration nozzles (rectangular and triangular) have the same dimensions in length and width — or that the data is indicated for a non-removable triangular sole, on which a larger rectangular one is put on if necessary. Such details can often be clarified directly from the photographs of the goods, in extreme cases — from the manufacturer's documentation.

Approximate noise level generated by the grinder during operation. Note that this indicator is quite approximate, because. actual "loudness" can vary markedly depending on the type and shape of the material being processed, the surface it is placed on, and other circumstances. In addition, different manufacturers may use different measurement methods. Nevertheless, this indicator makes it possible to assess how comfortable this or that model is in operation and whether special hearing protection is required.

The most “quiet” modern grinders give out about 65 dB — this is comparable to loud speech at a distance of 1 m; in the loudest, the noise level reaches 107 dB — this is the volume of an industrial workshop.

The length of the network cable can tell you how far from the outlet you can operate the device. Therefore, for domestic use, it is more relevant to choose models with a short cord, for construction work or use in production, in the garage a longer cable is better.

The total weight of the grinder; for battery models (see "Power Source"), usually, it is indicated without taking into account the battery.

This indicator has two meanings. On the one hand, light weight has a positive effect on manoeuvrability and reduces fatigue during work — especially when processing vertical surfaces and ceilings, as well as in other situations where the tool has to be held on weight. On the other hand, for grinders with a vibrational principle of operation (see "Type"), used for processing horizontal surfaces, a significant weight is considered optimal: it allows the tool to fit closer to the material being processed, and also contributes to stability and retention. So when choosing such a model by weight, it is worth considering the features of its intended application.