Dark mode
United Kingdom
Catalog   /   Automotive   /   Car Audio   /   Dashcams

Comparison Celsior CS-402 vs Globex HQS-205B

Add to comparison
Celsior CS-402
Globex HQS-205B
Celsior CS-402Globex HQS-205B
from $17.12
Outdated Product
from $23.40 up to $29.56
Outdated Product
TOP sellers
Typedashcamdashcam
Installation
on the windscreen
on the windscreen
Power connectorminiUSB
Camera
VGA (480p)640x480, 30 fps
HD (720)1280x960, 30 fps
Field of view120 °140 °
Recording features
sound recording
sound recording
Features
Functions
speaker
 
Screen
Screen size2.5 "2.5 "
Swivel screen
General
AV-output
Backup powerbattery
Size100х50х20 mm
Added to E-Catalognovember 2012september 2011

Power connector

The type of connector used in the recorder to power it. First of all, you should pay attention to this item if you plan to change the registrar with ready-made wiring for one or another type of connector ( miniUSB, microUSB, USB-C, DC 12V). Thus, the replacement of the registrar rests simply on installing a new one without re-changing the cable.

VGA (480p)

The maximum resolution and frame rate of video recorded by the recorder in the VGA standard (480p).

The 480p standard covers several resolutions with 480 vertical pixels; among DVRs there are options 640x480, 720x480 and 848x480. In general, all these resolutions are considered rather low; they are used as regular ones only in low-cost registrars. However, the ability to shoot at 480p can be provided in a more advanced device — for example, to save space on the drive.

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. Specifically, for the human eye, a speed of 24 to 60 fps is considered quite sufficient, however, among the registrars there are models that can shoot video at 120 or even 240 frames per second in 480p resolution. This shooting speed will be useful for slow-motion or frame-by-frame viewing of footage: it allows you to very clearly capture even fast-moving objects, which is important when analyzing ambiguous situations.

HD (720)

The maximum resolution and frame rate of video recorded by the recorder in the HD (720p) standard.

The classic resolution for this standard is 1280x720, but there are other options in DVRs — in particular, 1280x960 (4:3 aspect ratio). Anyway, HD is not outstanding, but quite a decent indicator that allows you to get a video with good detail (for example, it is usually quite possible to make out numbers on cars in close proximity to a car on it).

As for the frame rate, the higher it is, the smoother and less blurry the video will be, the better the details on moving objects will be visible, and also the more space the footage will take up. It is worth noting here that in some inexpensive models, shooting in HD at very low speeds — 15 – 20 fps is used to reduce the cost. Such a shooting speed allows you to watch video more or less normally, but for a normal display of moving objects, a higher frame rate is still desirable — at least 25 frames / sec. It is also worth saying that, in general, for a comfortable perception by a person, a speed of 24 to 60 frames per second is considered quite sufficient, however, among the registrars there are models that can shoot HD at 120 fps. The meaning of this speed is to ensure that individual details on moving objects are as clearly visible as possible in slow motion or frame-by-frame viewing.

Field of view

The viewing angle provided by the main camera of the DVR. As a rule, it is indicated along the diagonal of the frame, less often - horizontally, because of this, models with the same numbers in the characteristics may differ somewhat in the actual field of view. So if you have doubts about this, when choosing, it does not hurt to find and watch video samples from different models.

Other things being equal, a wider viewing angle allows you to cover more space, but individual details in the frame are smaller. In addition, wide-angle lenses give geometric distortions of the image (however, DEWARP can be provided to eliminate them, see "Functions"). As for specific figures, viewing angles up to 120° inclusive are considered relatively small for modern registrars, values of 121 - 140 ° can be called average, 141 - 160 ° are above average, and the most wide-angle models are able to cover a space of more than 160 °.

Functions

Radar detector. A sensor that reacts to the radiation of a police radar and warns the driver that the speed of movement can be recorded by the device. DVRs with this function are classified into a separate category - combo devices (see “Type”). Let us remind you that radar detectors are also available as separate devices, but the combo device takes up less space when installed. On the other hand, the “anti-radar” functionality in combined video recorders is generally somewhat more modest than in separately made radar detectors. And combo devices are quite expensive (although, most often, they are cheaper than a pair of a separate recorder and a radar detector with similar capabilities). We would like to emphasize that the presence of this function does not relieve you of the obligation to adhere to the speed prescribed by the traffic rules.

Signature recognition. A function of the radar detector described above that improves recognition accuracy and reduces the likelihood of false alarms. To do this, samples (signatures) of emissions from the most popular radar models are entered into the device’s memory, and when a signal is detected, the device compares it with the data in memory. In this way, you can quite accurately determine whether the received signal is the radiation of a radar (and which one), or whether it is just extraneous interference. The disadvantages of detectors with signature r...ecognition are quite high cost, slightly increased response time and the inability to “recognize” radars that are not stored in memory (however, some models allow updating the signature database).

Parking mode. A special mode that allows you to record emergency incidents on video while the car is parked; The G-sensor is used for operation (see “Shooting functions”). In parking mode, the recorder is in “sleep” mode, and if the G-sensor detects an impact, full recording starts. In this case, the video from the buffer is “glued” to the beginning of the recording, which allows you to record not only the moment of the incident itself, but also a few seconds before it.

Motion sensor. Recorder function based on motion detection in the camera lens. Thus, if the recorder “understands” that there is movement in the frame, automatic shooting is carried out. This allows you to configure the DVR to automatically turn on when you start driving, as well as record possible accidents, thefts, and car thefts from parking lots that come into the field of view of your device.

Voice control. Ability to control the DVR using voice commands. The specific list of such commands (and supported languages) may vary depending on the model. However, in any case, this function contributes to traffic safety: it allows you to keep your hands off the steering wheel and not be distracted from the road when operating the recorder.

Gesture control. Ability to control the device using gestures. Note that the capabilities of such control in DVRs are very limited: as a rule, a sensor is used for this, which responds to the movement of the user’s hand in front of the device and is capable of performing only one specific action. However, even this feature provides additional convenience and safety (compared to pressing buttons and especially working with menus): moving your hand takes a split second, while the driver is practically not distracted from the road. As for specific functions implemented through gesture control, they may include protecting the recorded video from being overwritten, saving a photo, turning off the sound signal from the radar detector (see above), etc. In some models, such a function is hard-coded in the settings and cannot be reconfigured; in others it is possible to choose one of several options.

Wi-Fi module. Wi-Fi technology is mainly known as a way to access the Internet wirelessly, but it can also be used to communicate directly with another device. The methods of using this technology in recorders may be different, depending on the functionality. For example, some models are capable of updating map marks for a GPS navigator and a GPS informer database via such a communication (see above); others allow you to upload the captured video directly to the Internet (for example, YouTube); and the most advanced devices with this function have touch screens and, when removed from the mount, can even be used as full-fledged tablets, with the ability to view web pages and install various applications. There are also quite specific possibilities - for example, broadcasting filmed or filmed video to a smartphone or tablet, distributing mobile Internet to other devices (if there is a 3G/4G module), etc. Note that the number of public Wi-Fi access points is constantly increasing, they are available at most large gas stations and are often provided in certain areas of large cities (parks, historical and business districts, etc.). So, accessing the World Wide Web from the recorder without removing it from the car may turn out to be much easier than it looks at first glance.

— 3G/4G modem. 3G or 4G mobile communication module. Designed mainly for data transfer - in other words, for using the mobile Internet; Voice calls for DVRs are considered overkill and are generally not supported. The communication speed in modern mobile networks is often comparable to a communication via Wi-Fi; so the options for using 3G/4G connectivity can be quite varied, depending on the specific model. However, three functions are most often encountered: downloading information about traffic jams and other relevant data (updates for the GPS informer, weather forecast, etc.); work as a GPS tracker (if this function is available - see above); as well as Wi-Fi access point mode, with mobile Internet distribution to other devices (if you have your own Wi-Fi module, of course). If we compare 3G/4G and Wi-Fi, then mobile communications are available almost everywhere, but you have to pay for using it.

Bluetooth. The recorder has a built-in Bluetooth module. This technology is used for direct wireless communication with other devices; its application may vary depending on the functionality of a particular registrar. One of the most popular options is to broadcast sound to a Bluetooth-enabled radio or to the driver’s headset: these can be various notifications from a navigator, radar detector, etc., signals from the Antison system (see above), and in some models - even music from the built-in player. Another popular application format is exchanging files with a smartphone, laptop or other similar device (primarily copying footage). In addition, other, more specific ways of using Bluetooth may be envisaged. And here it is worth noting that most recorders with this function work on Android (see the corresponding paragraph), so the range of options in them is very extensive - in fact, it is limited to the range of compatible applications.

- Speaker. Own speaker installed in the DVR body. Through such a speaker, for example, audio can be played when watching a captured video, voice prompts from a GPS navigator/informant, signals from a radar detector (see above), etc. However, it is worth considering that the sound power can be quite low, and in a noisy environment it may be difficult to listen to the speaker.

AV-output

AV output is an analogue output used to broadcast captured audio and video to an external display such as a TV. In registrars, such an output usually has the form of a mini-Jack connector, and a special cable is required for connection (often supplied in the kit, but there are exceptions). This interface does not allow working with HD resolutions, however, it does not require powerful hardware and can be provided even in the simplest and most inexpensive devices. Another advantage is that AV inputs (usually called composite) are found not only in modern, but also in frankly outdated video equipment like CRT TVs.

Backup power

Availability of a backup power source in the device design. Such a source comes into operation when the main power supply from the on-board vehicle network is unavailable, to finalize the recording when the ignition is turned off, during an accident and in other situations (for example, if you need to view the captured videos on the DVR).

Battery. The battery “under the hood” of recorders most often has a low capacity, sufficient for several minutes of autonomous operation. As a rule, this is a lithium-ion or lithium-polymer battery, which is an additional guarantee in case of emergency situations. First of all, the battery can be useful in case of an accident: if the voltage in the cigarette lighter socket disappears due to damage, the recorder will still remain operational and will be able to record at least a few more minutes after the accident.

Supercapacitor (ionister). A special energy drive is an ultra-high-capacity capacitor. Such a drive has a number of advantages over a battery. In particular, supercapacitors are immune to low and high temperatures, sunlight, they do not lose capacity as they wear out, and do not catch fire or explode even in extreme situations. And even in the event of a strong impact (for example, in the event of an accident), such a power source is more likely to remain operational than a battery. Ionisters are rightfully considered a much more advanced...and reliable backup power option. True, the capacity of such a capacitor is only enough to save the last recorded video and turn it off correctly - it does not allow the device to function autonomously even for several minutes. However, in the traditional use of DVRs, in general, no more is required, so in such cases, the practical advantages of this type of backup power significantly outweigh the disadvantages.