United Kingdom
Catalog   /   Large Appliances   /   Microwaves

Comparison Whirlpool MWD 19 MIR silver vs Whirlpool MWD 119 WH white

Add to comparison
Whirlpool MWD 19 MIR silver
Whirlpool MWD 119 WH white
Whirlpool MWD 19 MIR silverWhirlpool MWD 119 WH white
from $60.32 up to $89.04
Outdated Product
from $61.24 up to $90.72
Outdated Product
TOP sellers
Capacity20 L20 L
Technical specs
Power700 W700 W
Controlsrotary knobsrotary knobs
Turntable
Turntable diameter245 mm245 mm
Power levels55
Features
defrosting
defrosting
More specs
Door openingside (left)side (left)
Door opens withdoor handle
Inner coatingenamel
Dimensions (HxWxD)26x44x36 cm26x44x36 cm
Color
Added to E-Catalogfebruary 2017november 2016

Door opens with

- Handle. The door of the built-in microwave oven opens and closes with a handle while fixing in the closed position is provided by a spring latch. To open such a door, you need to pull it by the handle, overcoming the resistance of the spring latch. The handle on the door is common in capacious microwaves, as well as models with a downward opening door.

- Button. The door opening mechanism automatically ejects the door at the push of a button. To close the door back, the user needs to press the edge of the door against the lock. As a rule, the open button is used in built-in microwaves with a capacity not higher than average. The push-button opening mechanism is relevant only for models with a sideward door opening. The button allows you to get rid of the handle, which in some cases can spoil the overall interior of the kitchen, but the weak point of such a mechanism is the lock device itself, which is subject to mechanical wear.

Inner coating

— Enamel. The most inexpensive and common type of internal coating. The strength and reliability of enamel are generally sufficient for most cases. This material does not tolerate high temperatures, is relatively easily damaged and is prone to sticking small pieces of food and splashes, which makes cleaning difficult. As a result, the enamel is used mainly in inexpensive microwave ovens.

— Acrylic. Another fairly inexpensive material. It is not as widespread as enamel, but mainly because it appeared relatively recently. The main and only advantage of such a coating is its low cost. At the same time, it is not durable and does not tolerate strong heat, which is why it is used mainly in low-power models with a basic set of features.

- Stainless steel. In addition to its solid appearance, the steel coating has good strength and the ability to withstand high temperatures, and it is easy to clean. It is one of the best options if you plan to use the built-in grill extensively. In general, models with such a coating are noticeably more expensive than enamel ones, but this is due not so much to the coating as to more advanced features.

— Ceramics. Due to their hardness, ceramics resist scratches very well, and food particles practically do not stick to them. It makes these coatings very easy to clean. Their main disadvantage is fragility.

- Non-stick. This term may refer to various types of special coatings that prevent food from stick...ing. The best-known option is Teflon. This material has excellent non-stick properties. It is easy to clean but requires careful handling because it scratches easily. At the same time, it is believed that scratches lead to the release of harmful substances. Although, there is no unambiguous evidence for this. But with high heating, Teflon breaks down with the formation of harmful substances. However, in a microwave oven, such heating of the coating is almost impossible to achieve; and where there is such a possibility (for example, in models with a powerful grill), other heat-resistant non-stick materials are usually used.
Whirlpool MWD 19 MIR often compared
Whirlpool MWD 119 WH often compared